• Resources Recycling
• /
• v.29 no.6
• /
• pp.65-72
• /
• 2020

Black dross is a dark gray dross generated during the aluminum recycling process that uses flux, and contains NaCl, KCl, Al2O3, MgO, etc. Black dross is separated into soluble substances (NaCl, KCl) and insoluble substances (Al2O4, MgO) through the dissolution process. Soluble materials can be reused as salt flux, and Al2O3 and MgO can be upcycled to various ceramic materials through the synthesis process. In this study, Mayenite was synthesized using Al2O3 and MgO recovered from black dross, and the synthesis was performed according to the mixing ratio and reaction temperature. It was confirmed that when Mayenite was synthesized using black dross (spinel) and CaCO3, precursors were changed to Mg0.4Al2.4O4 and CaO at 700 ℃, and to Ca12Al14O33 (Mayenite) after 800 ℃. In the mixing conditions experiment, it was confirmed that the Mayenite XRD peak increased with increase of the CaCO3 content, and the Mg0.4Al2.4O4 XRD peak decreased. As a result of the BET analysis of the synthesized powder, the surface area decreased as the fine particles were grown and agglomerated in the process of generating mayenite.

• Journal of Nutrition and Health
• /
• v.54 no.1
• /
• pp.116-128
• /
• 2021

Purpose: The extraction conditions for bioactive components from peanut shells, which is a byproduct of peanut processing, were optimized to enhance the total phenolic content (TPC, Y1), total flavonoid content (TFC, Y2), and 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity (RSA, Y3). In addition, this study evaluated the anti-obesity effect of peanut shell extract. Methods: Optimization of ultrasonic-assisted extraction (UAE) was performed using a response surface methodology. The independent variables applied for extraction were time (X1: 5.0-55.0), temperature (X2: 26.0-94.0), and ethanol concentration (X3: 0.0%-99.5%). Quadratic regression models were derived based on the results of 17 experimental sets, and an analysis of the variance was performed to verify its accuracy and precision of the regression equations. Results: When evaluating the effects of independent variables on responses using statistically-based optimization, the independent variable with the most significant effect on the TPC, TFC, and RSA was the ethanol concentration (p = 0.0008). The optimal extraction conditions to satisfy all three responses were 35.8 minutes, 82.7℃, and 96.0% ethanol. Under these conditions, the inhibitory activities of α-glucosidase and pancreatic lipase by the extract were 86.4% and 78.5%, respectively. Conclusion: In this study, UAE showed superior extraction efficiency compared to conventional hot-water extraction in the extraction of polyphenols and bioactive materials. In addition, α-glucosidase and pancreatic lipase inhibitory effects were identified, suggesting that peanut shells can be used as effective antioxidants and anti-obesity agents in functional foods and medicines.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.3
• /
• pp.184-192
• /
• 2021

Domestic agriculture is facing real problems, such as a decrease in the population in rural areas, a shortage of labor due to an aging population, and increased risks due to the deepening of climate change. Smart farming technology is being developed to solve these problems. In the development of smart agricultural technology, irrigation control plays an important role in creating an optimal growth environment and is an important issue in terms of environmental protection. This paper is about the study of collecting and analyzing the rhizosphere environmental data of domestic paprika farms for the purpose of improving the quality of crops, reducing production costs, and increasing production. Irrigation control modeling presented in this paper Control modeling is to graphically present changes in a medium weight, feed, and drainage due to regional climatic features. To derive the graph, the parameters were determined through data collection and analysis, and the suggested irrigation control modeling method was applied to the collected rhizosphere environmental data to control irrigation in 6 regions (Gangwon-do, Chungnam, Jeonbuk, Jeonnam, Gyeongbuk, and Gyeongnam). The parameters were obtained and graphs were derived from them. After that, a study was conducted to analyze the derived parameters to verify the validity of the irrigation control modeling method and to correlate them with climatic features (average temperature and precipitation).

• FLOWER RESEARCH JOURNAL
• /
• v.26 no.4
• /
• pp.187-194
• /
• 2018

This study was conducted to investigate the facilities, cultivation, postharvest management, and distribution status of 27 cut chrysanthemum farms in Korea. The 60% of farms have cultivated the cut chrysanthemum using soil fertigation system in the PE plastic house. In Jeonnam and Busan provinces, Standard type of chrysanthemum was cultivated mainly than spray type of chrysanthemumJeoas. Most farms have been producing the rooted cuttings by plug system using cuttings self-propagated or purchased from the company, but farms in Jeonnam have been planting cuttings directly on cultivation bed. And the 66.6% of cut chrysanthemum farms have been pretreating with dipping in hot water or tap water after harvesting. Precooling was not performed on 70.4% of the farms, and precooling farms have been mainly conducted at temperature of $2-4^{\circ}C$. After harvesting, 70.4% of the farms stored the cut flowers at $2-4^{\circ}C$ for more than 48 hours to control the distribution volume. Cut chrysanthemum was graded mainly by individuals before distribution, and some export farmers have been conducting the cooperative grading. In distribution, all farms have distributed the cut flowers to the domestic markets, and 44.4% of these farms have been also exporting. The 63.0% of farms distributed to domestic market have been trading with flower auction sites.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.744-753
• /
• 2018

The Stockholm Convention, which was adopted in Sweden in 2001 to protect human health and the environment, includes regulations for Persistent Organic Pollutant Rotors such as toxic and bioaccumulatives. Currently, there are 28 types of materials. This prohibits and limits the production, use, and manufacture of products. Korea is a member of the Convention, and it is necessary to prepare management and treatment plans to address the POP trends. Thus, we experimentally investigate whether the environmentally stable incineration is achieved when the sample is thermally treated using the Lab-scale (1 kg/hr). The target samples is pesticides in liquid phase and solid phase. In this study, organic chlorinated pesticides and their thermal characteristics were analyzed. We calculated the theoretical air volume based on the element analysis results. Because the interior of the reactor is small, more than 10 times of the air ratio was injected. The retention time was set to at least 4 seconds using a margin. The incineration temperature was $850^{\circ}C$ and $1100^{\circ}C$. Thus, we experimentally investigated whether the environmentally stable incineration was achieved when the sample was thermally treated using the Lab-scale (1 kg/hr). We analyzed five types of exhaust gas; the 02 concentration was high, but the CO amount decreased. Complete combustion is difficult because of the small size of the furnace due to the nature of Lab-scale. The organic chlorine-containing pesticide had an average decomposition rate of 99.9935%. Considering the decomposition rates of organic chlorine-containing pesticide in this study, the incineration treatment at over 2 ton/hour, which is typical for a conventional incinerator, is possible. Considering the occurrence of dioxins and unintentional persistent organic pollutants, it can operate at more than $1,100^{\circ}C$.

• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.167-173
• /
• 2011

Nickel cobalt ferrite($Ni_{0.5}Co_{0.5}Fe_2O_4$) powder was prepared through the ceramic route by the calcination of a stoichiometric mixture of NiO, CoO and $Fe_2O_3$ at $1100^{\circ}C$. The pressed pellets of $Ni_{0.5}Co_{0.5}Fe_2O_4$ were isothermally reduced in pure hydrogen at $800{\sim}1100^{\circ}C$. Based on the thermogravimetric analysis, the reduction behavior and the kinetic reaction mechanisms of the synthesized ferrite were studied. The initial ferrite powder and the various reduction products were characterized by X-ray diffraction, scanning electron microscopy, reflected light microscope and vibrating sample magnetometer to reveal the effect of hydrogen reduction on the composition, microstructure and magnetic properties of the produced Fe-Ni-Co alloy. The arrhenius equation with the approved mathematical formulations for the gas solid reaction was applied to calculate the activation energy($E_a$) and detect the controlling reaction mechanisms. In the initial stage of hydrogen reduction, the reduction rate was controlled by the gas diffusion and the interfacial chemical reaction. However, in later stages, the rate was controlled by the interfacial chemical reaction. The nature of the hydrogen reduction and the magnetic property changes for nickel cobalt ferrite were compared with the previous result for nickel ferrite. The microstructural development of the synthesized Fe-Ni-Co alloy with an increase in the reduction temperature improved its soft magnetic properties by increasing the saturation magnetization($M_s$) and by decreasing the coercivity($H_c$). The Fe-Ni-Co alloy showed higher saturation magnetization compared to Fe-Ni alloy.

• Korean Journal of Ecology and Environment
• /
• v.53 no.4
• /
• pp.427-435
• /
• 2020

The most important thing to successfully restore an oak forest is finding suitable climatic conditions and topographic factors for the oak species to be introduced. In this study, in order to find suitable environmental conditions for the five dominant oak trees on the Korean Peninsula, we carried out analysing the information on the location of forest vegetation on the Korean Peninsula. The range of annual mean temperature of the five oak trees was narrow in the order of Q. mongolica (7.7~14.3℃), Q. variabilis (9.2~13.8℃), Q. acutissima (10.5~14.3℃), Q. serrata (11.4~13.7℃), Q. aliena (11.0~12.9℃). The range of annual precipitation of oaks was narrow in order of Q. mongolica (1072.7~1780.9 mm), Q. variablis (1066.6~1554.9 mm), Q. acustissima (1036.5~1504.8 mm), Q. serrata (1062.6~1504.7 mm). The range of altitude was in order of Q. mongolica (147~1388m), Q. serrata (93~950m), Q. variabilis(90~913m), Q. acustissima (60~516m), Q. aliena (55~465 m). The range of slope was in the order of Q. mongolica (8~56°), Q. variabilis(5~52°), Q. serrata (11~45°), Q. aliena (15~38°), Q. acustissima (16~37°). These results are considered to be very useful in the case of ecological restoration using deciduous oak trees on the Korean Peninsula.

• Journal of Ginseng Culture
• /
• v.3
• /
• pp.1-10
• /
• 2021

Panax ginseng (Ginseng or Korean ginseng) is one of the most important medicinal herbs in the world. We made a high-quality whole genome sequence of P. ginseng using 'Chunpoong' cultivar, which is the first cultivar registered in Korea Seed and Variety Service (KSVS) with relatively similar genotypes and superior phenotypes, representing approximately 3 Gbp and 60,000 genes. Genome sequence analyses of P. ginseng and related speciesrevealed the origin of Korean ginseng and the ecological adaptation of 18 Panax species around the world. Korean ginseng and American ginseng (P. quinquefolius) are tetraploid species having 24 chromosome pairs, while the other 16 species are diploid species with 12 chromosome pairs. Panax and Aralia are the closest genera belonging to the Araliaceae family that diverged approximately 8 million years ago (MYA). All Panax species evolved as shade plants adapting to cool climates and low light conditions under the canopy of deep forests from Southeast Asia such as Vietnam to Northeast Asia such as Russia approximately 6 MYA. However, through recurrent ice ages and global warming, most diploid Panax species disappeared due to the freezing winter, while tetraploid P. ginseng may have appeared by allotetraploidization, which contributed to the adaptation to cold temperaturesin Northeast Asian countries including the Korea peninsula approximately 2 MYA. American ginseng evolved by the adaptation of P. ginseng in Northeast America after the intercontinental migration 1 MYA. Meanwhile, most of diploid Panax species survived in high-altitude mountains over 1,600 meters in Southeast Asia because they could not endure the hot temperature and freezing cold. The genome sequence provides good basisto unveil the origin and evolution of ginseng and also supports practical gene chips which is useful for breeding and the ginseng industry.

• Food Engineering Progress
• /
• v.23 no.2
• /
• pp.118-124
• /
• 2019

This study aims to investigate the physical properties of extruded psyllium husk upon the addition of emulsifiers. Three different emulsifiers-glycerol monostearate (GMS), polyglycerol ester (PGE), and sugar ester (SE)-were added to the mixture of psyllium husk and rice powder before extrusion. Extrusion was performed using a twin-screw extruder at 140℃ die temperature, 200 rpm screw speed, and 16% feed moisture content. The physical properties of psyllium husk extrudates including expansion ratio, specific length, piece density, texture profile, color properties, water soluble index, and water absorption index were evaluated. It was observed that the expansion ratio was the highest while the specific length and piece density were the lowest in the control which had no emulsifiers. Texture profile analysis showed that the apparent elastic modulus and breaking strength were highest in the extrudate with a PGE of 0.1%. The adhesiveness was found to be lowest in the extrudates with an SE of 0.1% and GMS of 0.5%. Lightness value was highest in the extrudate with a PGE of 0.1%. Color difference, water soluble index, and water absorption index were highest in the control. The results reveal that some physical properties of extruded psyllium husk were improved with the addition of emulsifiers. This finding provides useful information for the development of psyllium snacks with good physical characteristics.

• Microbiology and Biotechnology Letters
• /
• v.48 no.4
• /
• pp.463-470
• /
• 2020

The JS18 strain was isolated from an old tree forest and produced extracellular enzymes that decolorize synthetic melanin. Phylogenetic analysis, based on the internal transcribed spacer (ITS) sequence, indicate that JS18 belongs to the Trametes velutina species. JS18 demonstrated laccase activity but no manganese peroxidase or lignin peroxidase activity. Batch culture indicated that the melanin decolorization activity of JS18 strain originated from the laccase. Syringic acid and CuSO4 induced maximum laccase production, yielding 98 U/ml laccase activity after cultivation for 7 days at 25℃. T. velutina secretes an extracellular laccase in GYP medium, and this enzyme was purified using (NH4)2SO4 precipitation, Hi-trap Q Sepharose columns and gel filtration. The molecular weight of the purified enzyme was estimated to be 67 kDa using sodium dodecyl sulfate polyacrylamide gel electrophoresis. This enzyme produced 80% of its melanin decolorization activity within the first 24 h of evaluation in the presence of 1-hydroxybenzotriazole (HBT), while only about 4% of the melanin was decolorized in the absence of the mediator. The greatest decolorization was observed at 1.5 mM/l HBT, which decolorized 81% of the melanin within the first 24 h. The optimum pH and temperature for this decolorization were found to be 5.0 and 37℃, respectively. Our results suggest the possibility of applying HBT induced T. velutina JS18 laccase-catalyzed melanin decolorization.