• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.4
• /
• pp.452-468
• /
• 2012

Marine organisms were collected by the stow nets and the stow net on boat fisheries from April 2010 to November 2011 in the Han River Estuary and categorized as 126 species, 61 families, and 5 taxa. The species were consisted with 34 in Crustacea, 5 in Cephalopoda, 79 in Pisces, unidentified jellyfishes in Cnidaria, and Finless porpoise in Mammals. The major species were composed of fish and crustaceans in the Han River Estuary. The dominant species in Crustacea were Chinese ditch prawn (Palaemon gravieri), blue crab (Portunus trituberculatus), Ridgetail prawn (Exopalaemon carinicauda), and mantis crab (Oratosquilla oratoria), and those in Pisces were Korean anchovy (Coilia nasus), and Japanese grenadier anchovy (Coilia mystus). The length structures of the six dominant species have more than one mode in the Han River Estuary. It reflects that the species inhibit during a part of and/or whole lifetime in the Han River Estuary where they utilize as spawning and/or nursery grounds. Freshwater fishes were collected from station D where is the closest location to the Han River stream, and their appearances were well matched with the large amount of freshwater discharge due to flood periods. Principal components analysis (PCA) was carried out with species compositions and showed temporal and spatial differences by the variations of species.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.352-362
• /
• 2016

In this paper, a disposal maneuver which complies the space debris mitigation guideline was analysed for KOMPSAT-2 as an example of LEO satellite. Definition of disposal altitude which comply the '25 year rule', re-entry survivability analysis of KOMPSAT-2 parts inside and casualty area analysis were performed using STK and ESA's DRAMA. Finally, assuming that there were several survival objects during uncontrolled re-entry stage, the re-entry initial orbit elements which show the low casualty probability were found even if there were various uncertainties about the initial orbit. As a result, KOMPSAT-2 should be descended its altitude at least 43km or up to 105km to comply '25 year rule' and there were heavy or heat resistant survival objects which generated $4.3141m^2$ casualty area. And if RAAN of re-entry initial orbit was 129 degree, total casualty probability was lower than standard value of space debris mitigation guideline even if there were uncertainties about the initial orbit.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.209-220
• /
• 2013

Handover is the technology to minimize data lose of mobile devices and make continuous communication possible even if the device could be moved from one digital cell site to another one. That is, it is a function that enables the mobile user to avoid the disconnection of phone conversations when moving from a specific mobile communication area to another. Today, there are a lot of ongoing researches for fast and efficient hand-over, in order to address phone call's delay and disconnection which are believed to be the mobile network's biggest problems, and these should essentially be resolved in all mobile networks. Thanks to recent technology development in mobile network, the LTE network has been commercialized today and it has finally opened a new era that makes it possible for mobile phones to process data at high speed. In LTE network environment, however, a new authentication key must be generated for the hand-over. In this case, there can be a problem that the authentication process conducted by the hand-over incurs its authentication cost and delay time. This essay suggests an efficient key caching hand-over method which simplifies the authentication process: when UE makes hand-over from oMME to nMME, the oMME keeps the authentication key for a period of time, and if it returns to the previous MME within the key's lifetime, the saved key can be re-used.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.409-417
• /
• 2014

Since the oil price has been significantly jumped for recent some years, the diesel engine of the merchant ship has been mainly used the heavy oil of low quality. Thus, it has been often exposed to severely corrosive environment more and more because temperature of the exhaust gas in a combustion chamber is getting higher and higher with increasing of using the heavy oil of low quality. As a result, wear and corrosion of most parts surrounded with combustion chamber is more serious compared to the other parts of the engine. Therefore, an optimum weldment for these parts is very important to prolong their lifetime in a economical point of view. In this study, four types of filler metals such as Inconel 625, 718, 1.25Cr-0.5Mo and 0.5Mo were welded with SMAW and GTAW methods in the forged steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected zone and base metal were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% H2SO4 solution. The weld metal and base metal exhibited the best and worst corrosion resistance in all cases of filler metals. In particular, the weld metal welded with filler metals of Inconel 718 revealed the best corrosion resistance among the filler metals, and Inconel 625 followed the Inconel 718. Hardness relatively indicated higher value in the weld metal compared to the base metal. Furthermore, Inconel 625 and 718 indicated higher values of hardness compared to 1.25cr-0.5Mo and 0,5Mo filler metals in the weld metal.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1027-1032
• /
• 2012

Two types of very small multiplying gears and arrays have been developed for new dental hand-pieces, and the increased speed ratios, modules, number of teeth, gear diameters, and gear types were calculated based on the dynamics of the machinery. The contacting and bending strengths were evaluated for gear teeth with two design concepts using AGMA equations and finite element analyses, and the contacting stresses on teeth with and without DLC (diamond-like-carbon) coating layers were calculated. Fatigue and tension tests were performed to obtain an S-N curve, the Young's modulus, and the strength of the gear material, and these were utilized in the analyses. Slightly larger stresses were found for 2-axis-type gears than for other types of gears, and the S-N curves showed that a gear lifetime of 109 cycles was satisfied. The contacting stresses in gears coated with DLC were reduced by 30%. A new prototype model of a hand-piece with small gears was successfully fabricated and tested.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.22 no.3
• /
• pp.69-76
• /
• 2017

Eelgrass, Zostera marina is a marine flowering plant that grows in submerged habitats for most of its lifetime, and experiences desiccation stress when exposed to air. Although the desiccation stress observed in adult eelgrass has been frequently studied, there has been little research on desiccation stress in eelgrass seeds. To survey desiccation stress in eelgrass seeds, we studied the germination rate and moisture content upon desiccation caused by exposure to air. The germination rate of the eelgrass seeds exposed to air for 1 hour at $20^{\circ}C$ and 50% relative humidity decreased markedly, and it decreased consistently as the exposure time increased. Eelgrass seeds exposed to air for longer than 11 hours did not germinate. As the exposure time of eelgrass seeds to air increased, the germination rate and moisture content decreased, showing a negative correlation. In addition, eelgrass seeds exposed to air at $30^{\circ}C$ showed significantly lower germination rates than those exposed to air at $10^{\circ}C$ or $20^{\circ}C$. Our results revealed that desiccation causes a decrease in the germination of eelgrass seeds, which will provide useful information for eelgrass habitat restoration using seeds.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.75-80
• /
• 2019

Silicon solar cells have been widely used as a most promising renewable energy source due to eco-friendliness and high efficiency. As modules of silicon solar cells are connected in series for a practical electricity generation, a large voltage of 500-1,500 V is applied to the modules inevitably. Potential-induced degradation (PID), a deterioration of the efficiency and maximum power output by the continuously applied high voltage between the module frames and solar cells, has been regarded as the major cause that reduces the lifetime of silicon solar cells. In particular, the migration of the $Na^+$ ions from the front glass into Si through the anti-reflection coating and the accumulation of $Na^+$ ions at stacking faults inside Si have been reported as the reason of PID. In this research, the thickness effect of $SiO_x$ layer that can block the migration of $Na^+$ ions on the reduction of PID is investigated as it is incorporated between anti-reflection coating and p-n junction in p-type PERC solar cells. From the measurement of shunt resistance, efficiency, and maximum power output after the continuous application of 1,000 V for 96 hours, it is revealed that the thickness of $SiO_x$ layer should be larger than 7-8 nm to reduce PID effectively.

• Journal of Aerospace System Engineering
• /
• v.12 no.1
• /
• pp.57-67
• /
• 2018

The APD (Antenna Pointing Driver) is an electronic equipment tool that is used to drive the two-axis gimbal-type antenna for the image data transmission of CAS (Compact Advanced Satellite). In this study, a heat dissipation of EEE (Electrical, Electronic and Electromechanical) is reviewed, to identify the parts that directly affected its efficiency, lifetime as well as the reliability of the structure. This event eventually incurs a failure of the EEE part itself, or even the entire satellite system as noted in experiments in this case. To guarantee reliability of electronic equipment during the mission, the junction temperature of EEE parts is considered a significant and important design factor, and subsequently must be secured within the allowable range. Therefore, the notation of the thermal analysis considering the derating is indispensable, and a proper thermal mathematical model should be constructed for this case. In this study, the thermal design and thermal analysis are performed to confirm the temperature requirement of the APD. In addition, we noted that the validity of the thermal model, according to each of the identified modeling methods, was therefore compared through the thermal analysis utilized in this case.

• Asia Marketing Journal
• /
• v.14 no.4
• /
• pp.143-165
• /
• 2013

Sales force automation (SFA) technologies are increasingly used to support customer relationship management (CRM) strategies. However, the popular press reports mixed results among companies incorporating SFA technologies and the previous studies have less interested in relationship quality between sales person and customer as an outcome of SFA. Actually the improved quality of the salesperson-customer relationship may be the most important outcome of SFA usage. This outcome is especially meaningful in today's marketplace given the increasing focus placed on customer retention and other customer related performance such as customer lifetime value. Therefore, this study seeks to further examine the impact of SFA usage within two different firms using SFA technologies to examine the impact of SFA usage on both customer relationship quality and sales performance. Additionally, the moderating roles of perceived managerial support and salesperson experience on the outcomes of SFA usage are examined. The results shows that direct effect of SFA usage on performance was not significant but highlight the mediating role of customer relationship quality in the SFA usage - sales performance relationship. Also, this research examines a number of moderating effects of both management supports for SFA and salesperson's sales work experience. The results indicate that management support has a significant direct influence on relationship quality and salesperson performance, but not a significant moderating effect on the relationship between SFA usage and the outcomes (relationship quality and performance). Thus moderating effects were not supported but find significant main effects. First of all, finding of this study suggest that a formula for successful SFA implementation must be one that highlights a SFA usage → relationship quality → sales performance sequence. This means when sales person use SFA they must build relationship with customer first then will return some long term performance. Second, the implications of not considering the introduction of big technology initiatives in terms of fit within the company's culture, strategy, structure, and environment may in many cases be quite noteworthy. Therefore, the launching of a new technology in the firm, such as SFA, may have a nonlinear impact upon overall firm performance, depending on the presence of other complimentary resources and capabilities. Finally the authors offer a number of implications for research and practice, and suggest directions for future SFA research that may further improve our understanding of this increasingly relevant topic.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1925-1931
• /
• 2024

The study conducted in the northwest region of Jordan aimed to assess the levels of natural radioactivity in soil and olive mill pomace (OMP) samples. The researchers used Nal (TI) gamma-ray spectrometry to measure the activity concentrations of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs in the samples. The average activity concentrations of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs in the soil samples were found to be 18.624 ± 5.82, 12.276 ± 5.728, 518.33 ± 212.57, and 0.140 ± 0.09 (Bq, kg^-1), respectively. In the OMP samples, the average activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K were 7.272 ± 4.386, 3.454 ± 1.503, and 169.997 ± 81.873 (Bq kg^-1), respectively, and no ¹³⁷Cs was detected. The study also investigated fundamental parameters associated with radon, specifically the radon emanation coefficient (Rn_EC) and radon mass exhalation rate (E_x). The Rn_EC values ranged from 0.621 to 0.78 (Bq kg^-1), with an average value of 0.71 ± 0.06 (Bq kg^-1). The estimated E_x from the soil samples ranged from 65.83 to 124.86 (mBq kg^-1h^-1), with an average value of 99.74 ± 21.73 (mBq kg^-1h^-1). Regarding radiological hazards, the study examined various parameters, including radium equivalent activity, external and internal hazard indices, gamma and alpha indices, absorbed gamma dose rate, and excess lifetime cancer risk. All of these assessed values were found to be below the worldwide recommended limits for radiological safety. Additionally, the study analyzed the concentrations of gross alpha and gross beta radioactivities in soil and OMP samples. The soil samples had an average gross alpha activity of 4.642 ± 1.04 (Bq kg^-1) and an average gross beta activity of 48.13 ± 14.50 (Bq kg^-1). The OMP samples showed an average gross alpha activity of 0.32 ± 0.27 (Bq kg^-1) and an average gross beta activity of 59.19 ± 12.94 (Bq kg^-1). Overall, the obtained results are crucial for evaluating the radiological risks associated with natural radioactivity in the northwest region of Jordan. The findings establish baseline data for comparison and reference for radioactivity levels in the environment.