• The Korean Journal of Food And Nutrition
• /
• v.25 no.2
• /
• pp.308-316
• /
• 2012

Proper skin care promotes good metabolism and the biological activity of skin, helps maintain the skin in a healthy and beautiful state when combined with nutritional nourishment. Health functional foods are being used for the purpose of enhancing efficient skin care. Health functional foods related to skin care maintain the epidermis, dermal fibroblast layer and subcutaneous tissue that form the skin. Efficient functional foods alleviate the signs of endogenous aging that come with getting older and exogenous aging caused by sunlight. Even though the field of skin care related to health functional foods has received less attention and been the subject of less research compared to functional cosmetics which are developing widely, this area of skin care that maintains and improves the layer of dermal fibroblast through the intake of food, is expected to progress with the commercialization of products in many fields when the related technical research development is galvanized and the related patents are applied for. Research into health functional foods related to skin care in Korea started rather late in comparison to other advanced countries where patents for relevant techniques have been applied for since 1990's together with research conducted on how they might be used for practical purposes. This study used the key words 'skin care, health functional food' to search for Korean patents that have been applied for at the Korean Intellectual Property Office from 1983 to 2011 using the KIPRIS database, in order to help researchers in the related fields by organizing the patented formulas for health functional foods for skin care which have gained attention recently. According to the number of registrations in each industry field, the total number of patents was 1,120 we screened the major patents among them, the field with the largest number was food foodstuff non-alcoholic beverage and preparation or treatment(A23L) with 135, then natural plant medicine & medical supplies and cosmetics(A61K) with 112, microorganisms or enzymes(C12N) with 63, heterocyclic compounds(C07D) with 44, horticulture or cultivation of sea weeds, forestry(A01G) 16 times, listed from the highest to the lowest number of applications. It has been revealed that food, foodstuff, non-alcoholic beverage and preparation or treatment(A23L) was the industry field where the most patents for health functional foods related to skin care were registered.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.6
• /
• pp.567-575
• /
• 2011

With the development of construction information, a computerization tool for architectural process control is a necessary tool. However, the reality is that the conditions and understanding of users are not sufficient to fully utilize such a tool. In particular, it was analyzed that the reason for the negative feedback from hands-on workers regarding the current process control information system is that there is a difficulty in accessing the system for users that are not process and planning experts, due to a lack of information and technical contents at the phase of control and planning prior to the process plan. Therefore, the demands of users and a direction for the improvement of a system in terms of optimizing process control computerization were investigated, with the aim of addressing the disadvantages of the existing system and developing a professional system that is specialized in the construction industry. Therefore, it is necessary to construct an integrated WBS (IWBS) that combines WBS with CBS, and subsequently, it is judged that the most important aspect is the integrated technology of compatibility and operation of data that is linked with OBS. The process information must then deal with the changing information; in other words, the amount of construction, construction cost, and the required construction period etc., by coding data into a 4-unit index, such as a project unit (WBS Level 1), a project facility unit (WBS Level 2), a management department unit (OBS Level 1), and a control manager unit (OBS Level 2). After that, it was found that it is necessary to develop a computer system to consistently integrate process information into a management department.

• Journal of Technologic Dentistry
• /
• v.6 no.1
• /
• pp.31-86
• /
• 1984

The educational purpose of a junior college is believed to be to effectively train and produce professional workers equipped with the knowledge and skills required in various technical fields of modern society. Since dental technology takes its share of an important role through the enhancement of people's health and the construction of a whlfare society, the prosthodontia department is imposed with a great responsibility to train highly skilled, responsible dental technicians who will meet the social demands. To attain this goal, those who are in charge of the training and education should place emphasis on the development of better educational programs. In other words, the present curriculum which is lacking in many comprehensive aspects, is not satisfactory to provide the students with the required know-how and qualities. As is known, a currculum is the detailed guidance to the efficient operation of an educational program, and that of dental technology is not an exception. In addition, dental technology requires very detailed programs in training, because it requires both diversified and comprehensive application of serveral different fields. The following are the main points to be taken into consideration in developing an effective curriculum for this department. 1. The curriculum should be gradually expanded so that the fundamental subjects will contain principal theories which can be directly applied to the specified majoring subjects. 2. An effective arrangement of time tables should be provided so that basic practice and experiments can be conducted in direct connection with the leatures on the basic theories. 3. For a creative and up-to-date curriculum to help cope with the problems in achieving the aims of technological development and scientific education, intensive and extensive studies should be done on the curricula developed in the advanced countries. 4. The specific majoring subjects should be rearranged to contain new theories which are beneficial to dental technology. As an institution which is spearheaded for ondustrial-educational cooperation, the Junior collegeis role demands that the department should make every possible effect to cultivate highly-skilled technicisns. The following suggestions are made to help work out an ideal curriculum. 1. The basic theory subjects should be selected with consideration toward closely related majoring subjects. 2. The curriculum should be efficiently operated to effectively relate theories with experiments. 3. Subject importance must be rearranged ; It has been found that the ideal proportion of cultural, elective and required subjects is 20%, 20% and 60% respectively. 4. The credit allotments should be reconsidered: The total credits required for completion should preferably be 80; 16 for the cultural and the elective subjects respectively and 48 for the required subject. 5. A Commissioned education system should be formalized for strengthening industrial educational cooperation. 6. Experiments and practice should be intensified with the support of improved laboratory facilities. 7. The training period should be expanded form the present two years to three of four years, in order to produce more highly qualified technicians.

• Korean journal of applied entomology
• /
• v.7
• /
• pp.39-51
• /
• 1969

The study involved determination of resistance levels of spider mites ta argano-phosphates using topical application and slide dip techniques; laboratory serening tests of alternative acaricides using an O/P resistant strain and a field trial of the screened materials. 1. Strains of Tetranychus were from Timaru(TR), Havelock Narth (HNR), Lincaln (LN). Germany (GR, GN). Comparisons of the resistant strains and normal strains at the LD50 and LC50 levels were as follows : (a) Using the topical application tochnique; with Parathian. resistant levels of the GR. TR and HNR strains of T. urticae were respeativuly, 1035. 484 and 452 times as resistant' as the LN strain. (b) Using the slide dip technique; with Phosdrin, resistant of GR, TR and HNR strains of T. urticae were 635, 274 and 266 times greater respeativuly, than the GN strain. 2. The laboratory sereaning tests were carried out far their contact plus stomach and residual effect to assess the toxicities of eleven alternative materials which would be used far control of O/P resistant strain of T. urticae. The acaricide groups represented were 3 organo-chlorines (Spidex, Kelthane and C 8514), 2 nitrophenyls (UC 19786 and Morocide), 2 cyclic carbonates(Eradex and Morestan). I carbamate (UC2004 7A), 1 mixture of carbamate and orano-chlorine and 2 other chemicals (C 8677 and M2527). From all acaricide tested. Kelthane and Morocide were the most effective, folowed by Spidex and M2527. Morestan, C8514. C8677 and RS 143 were intermediate, but Eradex, UC 19786 and UC 20046A were poor. 3, The number of sapmles required for estimation of the population in the field evaluation of acaricidal effects was one giving the highest practical precision. It was decided, after preliminary sampling trials. to use samples of 30 leaves per replicate which gave a $5.7\%$ standard error. 4. In the field trials, Morocide applied at the $0.05\%\;and\; 0.04\%$ a. i. conc. to black currant trees gave excellent control of O/P resistant population of T. urticae for about 12 days, but Morocide 0.025 and Kel thane $0.02\%$ a. i. cone. gave efficient control for about 6 days. In other words. first applications of Kel thane ane Moroeide gave very high degrees of control of O/P resistant population of the two-spotted spider mite. However, the results indicate that secondary application would sometimes be necessary. There was no foliage damage of black Currants and strawberries by either acaricides at the concentrations used. Acknowledgment ... The authors are grateful to: Dr. R. P. pottinger, Senior Lecturer in Agricultural Zoology. Lincoln college. New Zealand. for his helpful assistance in aiding with the organization of thd field work. Department of agriculture officers for mite colonies. Mr. D. A. Slade, Technical Advisor. Fruitgrowers' Federation (now at Massey University) for his assistance and provision of mites for testing. Mr T. McRae of Timaru for permission to use his crops for field tests. The following chemical companies and I or their New Zealand agents for so readily supplying samples of acarides; Ivan Watkins-Dow Limited. Fruitgrowers Chemical Company Limited. Henry H. York & company (New Zealand). Shell Oil (New Zealand) Limited.

• Journal of Conservation Science
• /
• v.34 no.2
• /
• pp.87-96
• /
• 2018

This study analyzed the influence of folding time on the forge welded bar and hammer scale produced using the traditional refining and forge welding reproduction experiment. In the case of the forge welded bar, increasing the forging time decreased the percentage of impurities and porosity from 26.09% to 1.8%. Additionally, the hardness increased by an average of 36.88 HV. In other words, the microstructure gradually became more precise. For the hammer scale, the amount of T Fe increased with forging time. X-ray diffraction analysis revealed the presence of quartz, fayalite, $w{\ddot{u}stite$, and magnetite. The amount of quartz decreased as the forging time increased. In addition, as the forging time increased, the granular $w{\ddot{u}stite$ changed into a cohesive, long, white band. The results provide information on the characteristics of the forge welded bar and hammer scale produced in the refining and forging process. This information can be used as technical data for ancient steel making processes as well as for future technological systems.

• Cartoon and Animation Studies
• /
• s.28
• /
• pp.125-153
• /
• 2012

This study is regarding what motion modality has influences on aspects of genre and media. Nowadays, motion modality becomes an element which is actively manipulated in live actions as well as animations. And, it has been generally accepted that a strategy on manipulation of motion depends on matters of genre or medium. As respected, can we say the premise is correct? if it is, can we refine the premise more theoretically, without using the words, 'genre' or 'media' which have not been are not been defined on an academic aspect. I intend to discuss on this issue. I will speculate the issue of manipulation of motion modality on theoretical bases. According to McLuhan's hot/cool media theory and Bolter's oscillation theory, the effect of it turns out to be same as manipulation of sentience ratio of media readers, and the ideal result will be examined by an example analysis. In the analysis, I will explore what effects manipulation of motion has on several examples. Then, by examining what kind of correlation these effects has with media/genre positioning, I ultimately will evaluate the genre/medium-based determinism of motion modality, which is represented by a typical premise like "Animation is most realistic when it has the most animation-like movement." Conclusively I suggest a refined premise like the following. Modality of motion is a strategy depending on issues of genre, with no regard to issues of medium, and the issue of genre is a category which is positioned considering mixture ratio of sentience. With this reason, A strategy of modality of motion depends to sentience a certain sequence needs. So, motion modality becomes a strategy which has to be approached in functionality of genre rather than economic values which spring from technical devices like a motion capture.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.407-427
• /
• 2015

This thesis is research about the development and application of the panorama image in contemporary artwork, focusing on sculpture and installation. The samples of artworks are a selection of representatives from numerous examples of works that cannot be introduced without exceeding a reasonable scope of the thesis. A brief outline of the historical concepts of the perspective will describe the development of the panorama in itself. Some technical explanations and the practical use of the panorama with its link to 3-dimensional applications should bridge the explanation gap between the 2nd and 3rd dimensional usage of the panorama in contemporary artwork. Furthermore, some philosophical statements are proposed in the discussion. One of the main interests and initial motivation of this study was my personal believe that there is always a relationship between social philosophical values and the way a society sees or encounters visual structures. In other words the contemporary understanding of space and perspective is mirroring the actual zeitgeist and creates an exemplary visual aesthetics.

• The Journal of the Korea Contents Association
• /
• v.15 no.5
• /
• pp.620-629
• /
• 2015

As the construction industry becomes bigger and more complicated, standardization of terms should be established between academic and industrial fields in order to accumulate and share information technology. The aim of this study is to investigate and analyze the research trends and actual usage of construction and architectural terms in Korea. For this purpose, we examined research related to construction and architectural terms by searching RISS up to August 2014. We also analyzed document types and contents of research by year. As a result, 130 research studies related to construction and architectural terms were searched. Of document types, glossary ranks the highest, followed by academic journal papers, master's theses and research reports. Research related to construction and architectural terms began in 1939, and was actively studied between the mid-1980s to the mid-1990s. Within the research, list and opinion of related construction and architectural terms are found the most frequently, followed by standardization, analysis, alteration, dictionary and wordbook, and search system of terms. Despite these efforts and research, standardization of terms has not yet been consolidated between academic and industrial fields. Therefor, we suggest six proposals in order to standardize the terms. This study is an attempt to see the trends and conditions of construction and architectural terms and to provide base-line data and an insight for future research.

• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.47-64
• /
• 2019

The purpose of this study is to analyze the research trends of the The Korean Journal of Institute of Industrial Educations and present the development directions of the The Korean Journal of Institute of Industrial Educations. In order to achieve the purpose of the study, in this study compared and analyzed 158 articles which have been published from the 36 edition to 44 edition of The Korean Journal of Institute of Industrial Educations, the central part in Industrial Educations, to understand the research trend of the Korean Journal of Institute of Industrial Educations. When it comes to the result from the conclusion, firstly The Korean Journal of Institute of Industrial Educations has steadily published a sort of the article twice a year. Secondly, in The Korean Journal of Institute of Industrial Educations, the articles of vocational industrial education are published more than the other kind of the article such as technology education and the rest of education Third, key words of the Korean Journal of Institute of Industrial Educations the word Specialized Technical High School came out the most, followed the word NCS(National Competency Standards). Fourth, the research methods which are used for the study of Industrial Educations are Survey Study, Literature investigation, Contents Analysis, development research but Case Study has been used rarely. Fifth, most of the researches have been conducted by co-research which especially belongs to the university more than one researcher.

• Resources Recycling
• /
• v.22 no.3
• /
• pp.73-80
• /
• 2013

Metal prices are rapidly rising due to increasing demand of metals and limited available resources according to the industrial requirement. As a result, securing a stable supply of these metal resources has been recognized as a core element of national competitiveness and sustained economic growth. In the case of magnesium and its alloys which are entirely depending on import, low-grade magnesium scraps from end-of-life vehicles and 3C(Camera, Computer, Communication) parts and magnesium wastes such as sludge and dross generated during melting process are hardly recycled. Accordingly, the development and commercialization of recycling technology of low-grade magnesium scrap is desperately needed to improve efficiency of resource circulation and to establish the required proprietary of resource metal supply and demand. In this study, papers and patents on recycling technologies of waste magnesium were analyzed. The range of search was limited in the open patents of USA (US), European Union (EP), Japan (JP), Korea (KR) and SCI journals from 1974 to 2012. Patents and journals were collected using key-words searching and filtered by filtering criteria. The trends of the patents and journals was analyzed by the years, countries, companies, and technologies.