• Title/Summary/Keyword: taxus

Search Result 214, Processing Time 0.028 seconds

Extraction of Taxol and Baccatin III from Needles of Taxus Cuspidata by Using Supercritical Carbon Dioxide with Cosolvents (초임계 이산화탄소와 보조용매를 이용한 주목잎에서의 Taxol과 Baccatin III의 추출)

  • 신혜원;전문균이훈
    • KSBB Journal
    • /
    • v.11 no.1
    • /
    • pp.100-106
    • /
    • 1996
  • The extraction of taxol and baccatin III from the ground needles of Taxus cuspidata were carried out by using supercritical carbon dioxide with and without cosolvents such as ethylacetate and methanol at 300 bar and 313K. Taxol is a promising anticancer agent and baccatin III is a precursor of semisysthesis of taxol. The taxol and baccatin III contents in the extracts were determined by a HPLC. The highest yields of taxol and baccatin III could be obtained by the supercritical extraction with 3wt% methanol and ethylacetate, respectively, as cosolvents. It was also found that the selectivity of taxol and baccatin III were 0.117 and 1.245wt%, respectively, with 0.7wt% ethylacetate, which demonstrated that the selectivity of taxol and baccatin III were increased about 1.8 and 19 times than those of conventional organic solvent extraction.

  • PDF

Analysis of Taxol and Related Compounds in Ullung Island Yew (Taxus cuspidata var. latifolia) (울릉도 주목(Tiaxus cuspidata var. latifolia)의 Taxol 및 관련 화합물의 함량분석)

  • 최명석;곽상수박용구유장렬
    • KSBB Journal
    • /
    • v.9 no.2
    • /
    • pp.186-190
    • /
    • 1994
  • The content of taxol and related compounds in various tissues of native yews( T. cuspidata var. latifolia) grown in 5 locations of Ullung Island were analyzed. A considerable range of vanation in the content was observed in the needle and bark collected from different trees located at the same area as well as at five different areas. Taxol content was much higher in the needle(0.017% on the dry weight basis) than those in the bark, whereas the content of 10-deacetyl baccatin III(10-DAB III) was slightly higher in the bark(0.073%), regardless of the location of the trees collected. Particuayly, the needle collected from the Hyunpo area, which located in North-west part of Ullung Island, contained the highest level of taxol(0.024%) exceeding the reported level in dried barks of Pacific yew and also somewhat higher level of its Precusor, 10-DAB III(0.049%). These results suggested that the needle of the yew at the Ullung Island could be suitable materials as a renewable source for the mass production of taxol.

  • PDF

Studies on the Structure of Forest Community at Paekryunsa-Hyangchokpong area in T$\v{o}$kyusan National Park (덕유산 국립공원 백련사-향적봉지구의 삼림군집구조에 관한 연구)

  • 김갑태;김준선;추갑철;진운학
    • Korean Journal of Environment and Ecology
    • /
    • v.7 no.2
    • /
    • pp.155-163
    • /
    • 1994
  • To investigate the structure and the conservation strategy of natural forest at Paekryunsa-Hyangcho kpong area in Tokyusan, 21 plots (400$m^2$) set up with random sampling method. Four groups were classified by cluster analysis. High positive correlations was proved between Tripterygium regelii and Acer tschonoskii var. rubripes, Viburnum sargentii and Betula ermanii, Corylus heterophylla var. thunbergii and Stephanandra incisa, Betula costata and Cornus controversa, Acer mono and Tilia amurensis, Tilia amurensis and Kalopanax pictum, Lonicera maackii and Viburum sargentii, and Betula ermanii, Acer tschonoskii var. rubripes and Taxus cuspidata, and Viburnum sargentii, and High negative correlations was proved between Acer pseudo-sieboldianum and Viburnum sargentii, Tripterygium regelii and Stephanandra incisa, Acer tschonoskii var. rubripes, and Stephanandra incisa. Species diversity(H') of investigated area was calculated 0.9402~1.2473. Taxus cuspidata, Betula ermanii and Abies koreana at Hyangchokpong area in Tokyusan should be conserved.

  • PDF

Purification and Characterization of Paclitaxel from Plant Cell Cultures of Taxus chinensis in Large-Scale Process (식물세포 Taxus chinensis 배양으로부터의 Paclitaxel 대량 정제 및 특성)

  • 김진현;기은숙;민범찬;최형균;홍승서;이현수
    • KSBB Journal
    • /
    • v.15 no.5
    • /
    • pp.537-540
    • /
    • 2000
  • In developing a HPLC purification process, it was hoped that a single chromatographic system would be sufficient to abtain pure paclitaxel in high yield. However, no such system was found, due in part to the complex taxoid profile of crude paclitaxel and to the rigorous nature of the product specification. A two step HPLC purification was adopted using reverse-phase separation on C(sub)18 as a first step, and normal-phase separation on silica as the final polishing step. Impurity profiles were established and maintained for paclitaxel, which identified and quantified each impurity observed in purified paclitaxel from these two steps, all impurities at or above 0.1% were identified. Results provide information for improving the quality control of paclitaxel production.

  • PDF

Evaluation of Adsorption Characteristics of 2-Picoline onto Sylopute (실로퓨트에 대한 2-피콜린의 흡착 특성 평가)

  • Yang, Ji-Won;Kim, Jin-Hyun
    • Korean Chemical Engineering Research
    • /
    • v.57 no.2
    • /
    • pp.210-218
    • /
    • 2019
  • Batch experiment studies were carried out on the adsorption of the major tar compound, 2-picoline, derived from the plant cell cultures of Taxus chinensis, using Sylopute while varying parameters such as initial 2-picoline concentration, contact time and adsorption temperature. The experimental data were fitted to the Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. Comparison of results revealed that the Langmuir isotherm model could account for the adsorption isotherm data with the highest accuracy among the four isotherm models considered. From the analysis of adsorption isotherms, it was found that adsorption capacity decreased with increasing temperature and the adsorption of 2-picoline onto Sylopute was favorable. The kinetic data were well described by the pseudo-second-order kinetic model, while intraparticle diffusion and boundary layer diffusion did not play a dominated role in 2-picoline adsorption according to the intraparticle diffusion model. Thermodynamic parameters revealed the exothermic, irreversible and non-spontaneous nature of adsorption. The isosteric heat of adsorption decreased as surface loading ($q_e$) increased, indicating a heterogeneous surface.

Adsorption of Cephalomannine onto Sylopute: Isotherm, Kinetic and Thermodynamic Characteristics (실로퓨트의 세팔로마닌 흡착: 등온흡착식 및 속도론적·열역학적 특성)

  • Kim, Hyunsik;Kim, Jin-Hyun
    • Korean Chemical Engineering Research
    • /
    • v.57 no.2
    • /
    • pp.219-224
    • /
    • 2019
  • In this study, the adsorption characteristics of cephalomannine on commercial adsorbent Sylopute were investigated using different parameters such as adsorption temperature, time, and initial cephalomannine concentration for the efficient separation of Taxus chinensis-derived cephalomannine by adsorption process. The Temkin isotherm model showed good fit to the equilibrium adsorption data. The adsorption capacity decreased with increasing temperature and the adsorption of cephalomannine onto Sylopute was physical in nature. Adsorption kinetic data fitted well with pseudo-second-order kinetic mode. According to the intraparticle diffusion model, film diffusion and intraparticle diffusion did not play a key role in the entire adsorption process. The process of cephalomannine adsorption onto Sylopute was exothermic and spontaneous. In addition, the isosteric heat of adsorption was constant even with variation in surface loading indicating homogeneous surface coverage.

Development of An Improved Acetone-Water Fractional Precipitation Process for Purification of Paclitaxel from Taxus chinensis and Its Kinetic and Thermodynamic Analysis (Taxus chinensis로부터 파클리탁셀 정제를 위한 개선된 아세톤-물 분별침전 공정 개발 및 그 동역학 및 열역학적 해석)

  • Kang, Hoe-Jong;Kim, Jin-Hyun
    • Korean Chemical Engineering Research
    • /
    • v.59 no.3
    • /
    • pp.379-392
    • /
    • 2021
  • In this study, an improved acetone-water fractional precipitation process for paclitaxel using ultrasonic cavitation bubbles and gas bubbles was developed. Compared to the conventional method, the time required for precipitation has been reduced by 20~25 times. In addition, the particle size of paclitaxel decreased by 3.5~5.5 times and the diffusion coefficient of paclitaxel increased by 3.5~6.7 times. In the case of precipitation using ultrasonic cavitation bubbles, as the ultrasonic power increased and the temperature decreased, the precipitation rate constant increased. In the case of precipitation using gas bubbles, as the gas flow rate increased and the temperature decreased, the precipitation rate constant increased. Thermodynamic parameters revealed the exothermic, irreversible, and nonspontaneous nature of the improved fractional precipitation.

The distribution of conifers and taxads in time and space in the Korean peninsula (韓半島 松栢類의 時 . 空間的 分布域 復元)

  • ;Kong, Woo-Seok
    • Journal of the Korean Geographical Society
    • /
    • v.30 no.1
    • /
    • pp.1-13
    • /
    • 1995
  • One of the oldest fossil of conifers and taxads in the Korean peninsula includes Elatocladus, Ullmannia, Walchia and dates back to the Permian period of the Palaeozoic era. The only conifer which successfully survived since the Cretaceous period is Pinus and still thrives in Korea. The extinction of Miocene conifers, such as Sciadopitys, Taxodiaceae, Metasequoia and Cryptomeria may due to the climatic deteriorations during the late Pleistocene period. However, the cryophilous conifers and taxads, e.g..Pinus, Juniperus, Abies, Picea, Cupressaceae, Larix and Taxus continued to exist from the Miocene to the late Pleistocene and became major vegetational elements in the mountainous areas of Korea. As the temperature ameliorates in the late Holocene period, thermophilous Pinus (Diploxylon) gradually had increased in numbers and became a dominant vegetation in the lowland and montane areas since 2,000 years B.P. in korea. Out of various Korean conifers and taxads, Pinus which surviving since the Cretaceous period of Mesozoic era, ranges spatially from southern coastal area to northern alpine belt of the Korean peninsula. Pinus which contains largest species number in conifers is one of the most well-adapted genus to the Korean environment. The next important conifer Juniperus dates back to the Miocene period of Cenozoic era and continuously maintains speciation and expansion of distributional range. Other major conifers and taxads of Korea include Picea, Abies, Lorix and Taxus. The restriction of distributional range of Cephralotaxus and Tsuga may due to the climatic deterioration during the Pleistocene period of Cenozoic era. The patterns of the temporal and spatial distribution of Korean conifers and taxads may provide invaluable informations for the better understanding of present-day distributional range and ecology.

  • PDF

Distribution of Major Plant Communities Based on the Climatic Conditions and Topographic Features in South Korea (남한의 기후와 지형적 특성에 근거한 주요 식물군락의 분포)

  • Yang, Keum-Chul;Shim, Jae-Kuk
    • Korean Journal of Environmental Biology
    • /
    • v.25 no.2
    • /
    • pp.168-177
    • /
    • 2007
  • By using DEM and digital actual vegetation map with MGE GIS software program, topographic features (altitude, slope, latitude, etc.) quantitatively were analysed and their data integrated as the index of climatic conditions (WI, CI, air temperature, etc.) in South Korea. Warmth Index (WI) decreases $5.27^{\circ}C{\cdot}month$ with latitudinal $1^{\circ} degree, and $3.41^{\circ}C{\cdot}month$ with attitudinal 100 m increase. The relationship between CI and WI values is expressed as a linear regression, $WI=116.01+0.96{\times}CI,\;R^2=0.996$. The distributional peaks of different plant communities along Warmth Index gradient showed the sequence of Abies nephrolepis, Taxus cuspidata, Abies koreana, Quercus mongolica, Carpinus laxiflora, Q. dentata, C. tschonoskii, Q. serrate, Pinus densiflora, Q. aliena, Q. variabilis, Q. acutissima, P. thunbergii, Q. acute, Castanopsis cuspidata var. sieboldii, Camellia japonica, Machilus thunbergii community from lower to higher values. The Quercus mongolica forest occurred frequently on E-NW and SE slope aspect within WI $70{\sim}80^{\circ}C{\cdot}month$ optimal range at mesic sites, NW and SE slope than xeric sites S and SW slope. The Q. serrata forest showed the most distributional frequency in NW and W slope aspect within WI $90{\sim}100^{\circ}C{\cdot}month$ range, Q. variabilis and Q. acutissima forest showed the high frequency of distribution in SE slope in WI $95{\sim}100^{\circ}C{\cdot}month$ range. By the slope gradient analysis, five groups were found: 1. Abies nephrolepis, Machilus thunbergii, 2. Taxus cuspidata, Abies koreana, Quercus mongolica, Q. dentata, Q. serrata, Q. variabilis, Castanopsis cuspidata var. sieboldii 3. Pinus densiflora, Q. aliena, Q. acutissima, P. thunbergii, Q. acuta 4. Carpinus laxiflora, Camellia japonica 5. C. tschonoskii from steep slope to gentle slope sequence.

Prepurification of paclitaxel by micelle and precipitation

  • Seong, Ju-Ri;An, Hui-Bun;Kim, Jin-Hyeon
    • 한국생물공학회:학술대회논문집
    • /
    • 2003.04a
    • /
    • pp.501-504
    • /
    • 2003
  • A novel prepurification method was developed aiming at increasing yield and purity, also reducing solvent usage for purification of paclitaxel. This method was a simple and efficient procedure, for the isolation and prepurification of paclitaxel from the biomass of Taxus chinensis, consisting of micelle formation, followed by two steps of precipitation. The use of a micelle and precipitation in the prepurification process allows for rapid separation of paclitaxel from interfering compounds and dramatically reduces solvent usage compared to alternative methodologies. This prepurification process serves to minimize the size and complexity of the HPLC operations for paclitaxel purification. This process is readily scalable to a pilot plant and eventually to a production environment where multikilogram quantities of material are expected to be produced. As much as possible, the process has been optimized to minimize solvent usage, complexity, and operating costs.

  • PDF