• 제목/요약/키워드: target variation rate

검색결과 94건 처리시간 0.03초

토모테라피를 이용한 간암환자의 정위적 방사선치료시 복부압박장치의 유용성 평가 (Usefulness of Abdominal Compressor Using Stereotactic Body Radiotherapy with Hepatocellular Carcinoma Patients)

  • 우중열;김주호;김준원;백종걸;박광순;이종민;손동민;이상규;전병철;조정희
    • 대한방사선치료학회지
    • /
    • 제24권2호
    • /
    • pp.157-165
    • /
    • 2012
  • 목 적: 간에 발생한 절제 불가능한 원발성 및 전이성 종양에서 토모테라피를 이용한 정위적 방사선치료를 시행하기 위해 사용된 복부압박장치의 유용성을 평가하고자 하였다. 대상 및 방법: 2011년 11월부터 2012년 3월까지 토모테라피(Hi-Art Tomotherapy, USA)를 시행받기 위해 본원에 내원한 간암환자 중 복부압박장치(diaphragm control, elekta, sweden)를 사용하였을 때 움직임이 1 cm 이상 줄어든 환자를 대상으로 하였다. 4D CT (somatom sensation, siemens, germany)를 통해 치료계획영상과 4차원 단층촬영영상을 촬영하고, 육안적으로 보이는 종양과 종양의 움직임을 고려하여 육안적 종양체적(gross tumor volume, GTV)으로 설정하였고, GTV 주변으로 균일하게 5~7 mm의 여유를 주어 치료계획용 종양체적(planning target volume, PTV)으로 설정하였다. 손상위험장기(organs at risk) 중 십이지장, 위, 대장의 거리가 종양으로부터 최소 1 cm 이상인 환자들을 1군($d{\geq}1$)으로, 1 cm 미만인 환자들을 2군(d<1)으로 분류하고 각각 4~5회의 정위적 방사선치료와 20회의 방사선치료를 계획하였다. Mega-voltage computed tomograpy (MVCT)와 kilo-voltage computed tomograpy (KVCT)를 일차적으로 골격구조셋팅(bone-technique)으로 융합(fusion)한 뒤, 이차적으로 간을 보며 영상을 재조정 하였다. 치료 후 얻은 MVCT 영상을 영상변형이 가능한 Mim_vista (Mimsoftware, ver. 5.4 USA)로 보내고, 간을 비교하여 다시 묘사(delineate)하고, 손상위험장기 중 십이지장, 위, 소장, 대장을 합쳐서 대장장기(bowel_organ)로 정의하여 다시 묘사하였다. 보정방사선 치료계획시스템을 통하여 보정영상의 치료계획 선량과 보정된 선량의 차이를 평가하였다. 첫 번째, 치료 시작일부터 각각 1군($d{\geq}1$)은 4회, 2군(d<1)은 10회까지의 MVCT와 KVCT간의 영상 융합을 통한 셋업오차를 분석하였다. 두 번째, 보정영상에서 종양 즉, GTV, PTV의 치료계획선량과 보정선량의 3%의 선량차이를 나타내는 체적($V_{diff3%}$)과 5%의 선량차이를 나타내는 체적($V_{diff3%}$)을 비교하였고, 손상위험장기 중 대장장기의 최대선량의 차이율을 비교하였다. 결 과: MVCT를 통해 분석한 평균 셋업오차는 $-0.66{\pm}1.53$ mm (좌-우), $0.39{\pm}4.17$ mm (상-하), $0.71{\pm}1.74$ mm (전-후), $-0.18{\pm}0.30$ degrees (roll)였다. 1군($d{\geq}1$)과 2군(d<1)의 셋업오차는 유사하였다. 1군($d{\geq}1$)에서 보정방사선 치료계획을 통한 $V_{diff3%}$ 중 GTV는 $0.78{\pm}0.05%$, PTV는 $9.97{\pm}3.62%$, $V_{diff5%}$ 중 GTV는 0.0%, PTV는 $2.9{\pm}0.95%$, 대장장기의 최대선량의 차이율은 $-6.85{\pm}1.11%$였다. 2군(d<1)에서 $V_{diff3%}$ 중 GTV는 $1.62{\pm}0.55%$, PTV는 $8.61{\pm}2.01%$, $V_{diff5%}$ 중 GTV는 0.0%, PTV는 $5.33{\pm}2.32%$, 대장장기의 최대선량의 차이율은 $28.33{\pm}24.41%$였다. 결 론: 복부압박장치를 통한 간암의 방사선치료시 MVCT를 통한 환자 셋업오차는 평균 ${\pm}5$ mm 이하였고, 복부 압박장치를 사용하고 투시영상을 통해 확인한 횡경막의 움직임이 최소 5 mm 이상이라는 것을 감안하면, 환자 셋업오차는 그 안에 있음을 알 수 있었다. 1군($d{\geq}1$)과 2군(d<1)에서 GTV, PTV의 선량차이율은 오차범위 안에 있었고, 1군($d{\geq}1$)과 2군(d<1)의 대장장기 최대선량의 차이율은 최대 35% 이상의 차이를 보였고, 1군($d{\geq}1$)이 2군(d<1)보다 오차범위가 작았다. 따라서 간내 종양과 손상위험장기의 거리가 최소 1 cm 이상 유지된다면 정위적 방사선치료를 진행함에 복부압박장치가 도움이 될 수 있을 것으로 사료된다.

  • PDF

유역기반 모형을 이용한 기후변화에 따른 낙동강 유역의 하천유량 영향 분석 (An Analysis of the Effect of Climate Change on Flow in Nakdong River Basin Using Watershed-Based Model)

  • 손태석;이상도;김상단;신현석
    • 한국수자원학회논문집
    • /
    • 제43권10호
    • /
    • pp.865-881
    • /
    • 2010
  • 미래기후에 대한 수환경 평가는 기후자료를 입력 값으로 요구하는 강우-유출모형을 이용하거나 유량 이외에 유사, 영양물질과 같은 수질인자를 동시에 모의할 수 있는 유역모형을 이용하여 평가하는 것이 일반적이다. 따라서 본 연구에서는 유역 모형으로 SWAT를 선정하고 낙동강 유역을 대상 유역으로 하여 기후변화로 인한 하천 유량의 영향을 분석하였다. 전지구기후모형(GCM: Global Climate Model)중 비교적 한반도의 기후 특성을 잘 재현하고 있는 호주(CSIRO: Mk3.0, 즉 CSMK) 모형과 캐나다(CCCma: CGCM3-T47, 즉 CT47) 모형의 A2, B1, A1B 시나리오를 SWAT 모형의 입력 자료로 활용하였다. 각 시나리오의 미래의 기온과 강우의 증가율을 분석하고 현재와 미래기후변화 시나리오에 따른 유량과 유량변동성을 연, 계절, 중기간으로 나누어 비교, 분석하였으며, 대부분의 지점에서 기온 및 유량이 증가하였으며 기후변화는 하천 및 호소의 수온상승과 유량변화에 큰 영향을 줄 것으로 예상되기 때문에 향후 본 연구의 결과를 토대로 기후변화에 따른 낙동강 유역의 유출량 증대로 인한 수공 구조물의 치수능력 증대 방안을 세워야 할 것이다.

직접분사식 바이오 에탄올-가솔린 혼합연료의 연료온도에 따른 분무 특성에 관한 실험적 연구 (An Experimental Study on Spray Characteristics of Directly Injected Bio-Ethanol-Gasoline Blended Fuel By Varying Fuel Temperature)

  • 이성욱;박기영;김종민;박봉규
    • 한국수소및신에너지학회논문집
    • /
    • 제25권6호
    • /
    • pp.636-642
    • /
    • 2014
  • As environment problem became a worldwide issue, countries are tightening regulations regarding greenhouse gas reduction and improvement of air pollution problems. With these circumstances, one of the renewable energies produced from biomass is getting attention. Bio-ethanol, which is applicable to SI engine, showed a positive effect on the PFI (Port Fuel Injection) type. However, Ethanol has a problem in homogeneous mixture formation because it has high latent heat of vaporization characteristics and in the GDI (Gasoline Direct Injection) type, mixture formation is required quickly after fuel injection. Particularly, South Korea is one of the countries with great temperature variation among seasons. With this reason, South Korea supply fuel additive for smooth engine operation during winter. Therefore, experimental study and investigation about application possibility of blending fuel is necessary. This paper demonstrates the spray characteristics by using the CVC direct injection and setting the bio-ethanol blending fuel temperature close to the temperature during each seasons: -7, 25, $35^{\circ}C$. The diameter and the width of the CVC are 86mm and 39mm. High-pressure fuel supply system was used for target injection pressure. High-speed camera was used for spray visualization. The experiment was conducted by setting the injection pressure and ambient pressure according to each temperature of bio-ethanol blending fuel as a parameter. The result of spray visualization experiment demonstrates that as the temperature of the fuel is lower, the atomization quality is lower, and this increase spray penetration and make mixture formation difficult. Injection strategy according to fuel temperature and bio-ethanol blending rate is needed for improving characteristics.

Ta-Si-N박막의 조성에 따른 결정구조 및 구리 확산 방지 특성 연구 (Crystalline Structure and Cu Diffusion Barrier Property of Ta-Si-N Films)

  • 정병효;이원종
    • 한국재료학회지
    • /
    • 제21권2호
    • /
    • pp.95-99
    • /
    • 2011
  • The microstructure and Cu diffusion barrier property of Ta-Si-N films for various Si and N compositions were studied. Ta-Si-N films of a wide range of compositions (Si: 0~30 at.%, N: 0~55 at.%) were deposited by DC magnetron reactive sputtering of Ta and Si targets. Deposition rates of Ta and Si films as a function of DC target current density for various $N_2/(Ar+N_2)$ flow rate ratios were investigated. The composition of Ta-Si-N films was examined by wavelength dispersive spectroscopy (WDS). The variation of the microstructure of Ta-Si-N films with Si and N composition was examined by X-ray diffraction (XRD). The degree of crystallinity of Ta-Si-N films decreased with increasing Si and N composition. The Cu diffusion barrier property of Ta-Si-N films with more than sixty compositions was investigated. The Cu(100 nm)/Ta-Si-N(30 nm)/Si structure was used to investigate the Cu diffusion barrier property of Ta-Si-N films. The microstructure of all Cu/Ta-Si-N/Si structures after heat treatment for 1 hour at various temperatures was examined by XRD. A contour map that shows the diffusion barrier failure temperature for Cu as a function of Si and N composition was completed. At Si compositions ranging from 0 to 15 at.%, the Cu diffusion barrier property was best when the composition ratio of Ta + Si and N was almost identical.

QTL mapping of low-temperature germinability and identification of qLTG1 candidate genes in rice

  • Kim, Sun Ha;Shim, Kyu-Chan;Lee, Hyun-Sook;Le, Anh Quynh;Ahn, Sang-Nag
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.116-116
    • /
    • 2017
  • Low-temperature is one of the environmental stress factors that affect plant growth and development and consequently limit crop productivity. The control of seed germination under low-temperature is organized by many genes which are called quantitative trait loci (QTLs). High germination rate for low-temperature is an important factor of growing rice. Previously, we identified a major QTL controlling low-temperature germinability in rice using 96 introgression lines (ILs) derived from a cross between Oryza rufipogon (Rufi) and the Korean japonica cultivar, 'Hwaseongbyeo (HS)'. A $BC_3F_7$ line (TR5) showed better low-temperature germinability than its recurrent parent. TR5 was crossed with HS to develop a segregating F2:3 populations for the target QTL. Six SSR markers polymorphic between HS and Rufi were used to screen and fine map the qLTG1. The qLTG1 on chromosome 1, which accounted for 55.5% of the total phenotypic variation, confirmed that Rufi allele enhanced the low-temperature germinability. Intervals between markers CRM16 and CRM15, four candidate genes were identified. The identified candidate genes, which are encoded by a protein of unknown function, showed their direct involvement on seed germination at low-temperature. To identify genes targeted by qLTG1, we investigated the expression profiles of these candidate genes and germination behavior of qLTG1 under different stress conditions and compared to HS, Rufi, and TR5 at $13{\pm}2^{\circ}C$ for 3 days after incubation. Furthermore, transgenic rice plants will also be developed to conduct a detailed investigation on low-temperature germinability. Hence, the QTL for low-temperature germinability would be useful in rice breeding programs especially in the development of lines possessing low-temperature germinability.

  • PDF

C-대역 라디오미터를 이용한 지표면 온도 측정 (Land Surface Temperature Measurements Using C-Band Radiometer)

  • 장태경;김영곤;우동식;손홍민;김강욱
    • 한국전자파학회논문지
    • /
    • 제21권9호
    • /
    • pp.1013-1022
    • /
    • 2010
  • 원격으로 지표면 온도를 측정하는 C-대역 라디오미터를 설계하고, 아스팔트를 대상으로 실시한 측정 결과를 제시하였다. 높은 감도와 낮은 전력 소모를 위해 전전력(total power)형 라디오미터 형태를 선택하였고, 안정적으로 높은 이득을 확보하기 위해 슈퍼헤테로다인(super-heterodyne) 방식으로 설계하였다. 중심 주파수 5.1 GHz에서 110 MHz의 대역폭을 가지도록 설계된 라디오미터는 59 dB의 이득과 2.7 dB의 잡음 지수를 가지며, 0.45 K의 수신 감도를 가진다. 제작된 시스템과 온도계를 사용해 아스팔트의 지표면 온도를 측정하였다. 그리고 각각의 측정 결과를 분석하여 설계된 라디오미터가 온도 변화에 대해 6 $mV/^{\circ}C$의 전압 변화율을 가지고 선형적으로 동작함을 보였다. 이를 통해 설계된 C-대역 라디오미터의 지표면 원격 온도 측정 센서로의 적용 가능성을 검증하였다.

DC Reactive Magnetron Sputtering법에 의한 Ti-Al-V-N 박막의 성장거동 (Growth behavior of Ti-Al-V-N Films Prepared by Dc Reactive Magnetron Sputtering)

  • 손용운;정인화;이영기
    • 한국재료학회지
    • /
    • 제9권7호
    • /
    • pp.688-694
    • /
    • 1999
  • Ti-6Al-4V 합금을 타겟트로 사용하여 유리 기판위에 dc reactive magnetron sputtering법으로 $N_2$/(Ar+N_2)$ 비, 기전력 및 시간등의 여러 가지 증착 조건에서 Ti-6Al-4V-N 필름을 증착하였고, 각각의 증착 조건에 따른 결정구조 및 우선방위 거동은 X-선 회절장치를 사용하여 조사하였다. Ti-6Al-4V-N 필름은 본질적으로 fcc 결정구조의 $\delta$-TiN에 Al과 V이 결함으로서 고용된 변형된 형태의 $\delta$-TiN구조이고, TiN의 격자상수(4.240 )보다 작은 값을 나타내었는데, 이는 Ti(1.47 )에 비하여 상대적으로 원자반경이 작은 Al(1.43 )과 V (1.32 )이 Ti의 격자위치에 치환된 결과이다. 그리고 Ti-6Al-4V-N 필름은 $_N2$가스 분압이 감소됨에 따라 (111) 우선방위 성장거동을 하였을 뿐만아니라 증착시간의 증가에 따라 뚜렷한 (111) 우선방위 성장거동을 나타내었다. 그리고 증착속도 및 결정입도의 거동 또한 여러 가지 증착 조건에 크게 의존한다

  • PDF

시계열 부하 곡선을 이용한 수체손상 평가 및 다변량 분석 -지석천 유역을 대상으로- (Evaluation of Impaired Waterbody and Multivariate Analysis Using Time Series Load Curve -in Jiseok Stream Watershed-)

  • 박진환;강태우;한성욱;백승권;강태구;유제철;김영석
    • 한국물환경학회지
    • /
    • 제33권6호
    • /
    • pp.650-660
    • /
    • 2017
  • In this study, pollutant emission characteristics by water damage period analyzed 11 items (water temperature, pH, DO, EC, BOD, COD, TOC, SS, T-N, T-P and flow) with load duration curve, time series load curve and factor analysis for three years (2014-2016). Load duration curve is applied to judge the level of impaired waterbody and estimate impaired level by pollutants such as BOD and T-P in this study depending on variation of stream flow. Water quality standard exceeded the flow of mid-range and low-range by flow condition evaluation using load duration curve. This watershed was influenced by point source more than non-point source. Cumulative excess rate of BOD and T-P kept water quality standard for all seasons (spring, summer, autumn and winter) except BOD 59% in spring. Water quality changes were influenced by pollutants of basic environmental treatment facilities and agricultural areas during spring and summer. Results of factor analysis were classified commonly first factor (BOD, COD, and TOC) and second factor (flow, water temperature and SS). Therefore, effects of artificial pollutants and maintenance water must be controlled seasonally and reduced relative to water damage caused by point pollution sources with effluent standard strengthened in the target watershed.

Response of Grain Yield and Milled-Rice Protein Content to Nitrogen Rates Applied at Different Growth Stages of Rice

  • Nguyen, Hung The;Kim, Min-Ho;Nguyen, Lan Thi;Lee, Byun-Woo
    • 한국작물학회지
    • /
    • 제51권1호
    • /
    • pp.14-25
    • /
    • 2006
  • Response of grain yield and milled-rice protein content to nitrogen (N) rates at various growth stages is critical for quantifying real-time and real-amount of applied N requirement for target grain yield and protein content. An experiment including 10 N rate treatments at transplanting, tillering and panicle initiation stages with four rice cultivars in 2003, 6 N treatments with two rice cultivars in 2004 and 2005 was conducted. Increase of N rates at PIS significantly increased both grain yield and milled-rice protein content but increase of N rates at tillering stage significantly increased grain yield but not milledrice protein content. Therefore, high grain yield and low milled-rice protein content would be difficult to obtain only by adjusting N rates at PIS. Internal N use efficiency (INUE) was 60.5 kg grain/kg N accumulation on an average over N treatments, cultivars, and experimental years, showing considerable reduction especially at high shoot N accumulation in the experimental year of low sunshine duration. Milled-rice protein content tended to increase almost linearly with increasing shoot N accumulation, but it revealed big variation even at the same shoot N accumulation at harvest. Milled-rice protein content decreased with increasing INUE. N accumulation in the milled rice increased at an almost constant proportion of 45.5 percent of the shoot N accumulated at harvest, showing slight decresing proportion with the increasing shoot N accumulation.

스테레오 비전 시스템에서 차 영상을 이용한 이동 물체의 거리와 속도측정 ((Distance and Speed Measurements of Moving Object Using Difference Image in Stereo Vision System))

  • 허상민;조미령;이상훈;강준길;전형준
    • 한국컴퓨터산업학회논문지
    • /
    • 제3권9호
    • /
    • pp.1145-1156
    • /
    • 2002
  • 스테레오 비전 시스템을 이용하여 이동 물체의 거리와 속도를 측정하기 위한 방법을 제안하였다. 이동 물체의 거리와 속도 측정에 있어서 가장 중요한 요소 중 하나는 물체 추적의 정확성이다. 따라서 빠르게 움직이는 물체 추적을 위해 배경 영상 기법을 이용하였고, 물체의 그림자와 잡음을 제거하기 위해 지역 Opening 연산을 이용하였다. 적응형 임계치를 적용하여 자기 변화에 상관없이 이동 물체의 추출 효율을 높이도록 하였다. 좌, 우 중심점 위치를 보정하여 더 정확한 물체의 속도와 거리를 측정할 수 있도록 하였다. 배경 영상 기법과 지역 Opening 연산을 사용하여 계산 과정을 줄임으로써 이동 물체의 거리와 속도의 실시간 처리가 가능하도록 하였다. 실험 결과, 배경 영상 기법은 다른 알고리즘과는 달리 빠르게 움직이는 물체를 추적할 수 있음을 보여준다. 적응형 임계치를 적용하여 후보 영역을 줄임으로써 목표물 추출 효율이 개선되었다. 양안 시차를 이용하여 목표물의 중심점을 보정함으로써 거리와 속도 측정 오차가 감소하였다. 스테레오 카메라에서부터 이동 물체까지의 거리 측정 오차율은 2.68%, 이동 물체의 속도 측정 오차율은 3.32%로 본 시스템의 향상된 효율성을 나타냈다.

  • PDF