• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.581-588
• /
• 2015

In this paper, we researched that setting standard for RSC(Radar Cross Section) of naval surface ship could be determined and considered in various ways on ship's survivability, technical building feasibility, operation and so on. This study presented fundamental capacity on anti-ship missile, radar, flight and so no and the procedure to set of target/standards for RSC. The RCS standards is good at setting low as low as to improve survivability aspect, but because we should consider effect, technical limit, cost etc, this paper analyzed necessary elements to set standard than to suggest specific number and suggested procedure to set standars according to suggest the boundary of RCS.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1253-1258
• /
• 2006

As a global effort to conservate the environment, life cycle assessment(LCA) which considers the environmental impact through the life cycle of a product, from acquiring of resources to scrapping, has been actively applied. The LCA is a tool to calculate quantitatively the environmental impacts caused by products or services through their life cycles. Eco-efficiency need that express value of environmental impact provision EMU and develops in two forms according to use target of Eco-efficiency as a tool that environmental impact of EMU. It is a strategic instrument which assists stakeholders to understand which products, processes or services to target with future investments and which are not by comparing economic and ecological values. The results stand for aggregated information on economical value and environmental impact. Also, In this method, it is important to derive EPI(Environmental Performance Index) and SPI(Service Performance Index) from the sources available. The following is used as one of Eco-efficiency tools to achieve the target performance of processes, products and services for designer or projector. According to the eco-efficiency methodology for EMU developed in this study, the user definition and the DB design were carried out as a basic design of eco-efficiency S/W.

• Journal of Korean Society for Quality Management
• /
• v.26 no.1
• /
• pp.48-60
• /
• 1998

This paper proposes a fourth generation index $C_{psk}$, constructed from $C_{psk}$, by introducing the factor｜$\mu$-T｜ in the numerator as an extra penalty for the departure of the process mean from the preassigned target value T. The motivation behind the introduction of $C_{psk}$ is that when $T\neqM$ process shifts away from target are evaluated without respect to direction. All indices that are now in use assume normally distributed data, and any use of the indices on non-normal data results in inaccurate capability measurements. In this paper, a new process capability index $C_{psk}$ is introduced for non-normal process. The Pearson curve and the Johnson curve are selected for capability index calculation and data modeling the normal-based index $C_{psk}$ is used as the model for non-normal process. A significant result of this research find that the ranking of the six indices, $C_{p}$, $C_{pk}$, $C_{pm}$, ${C^*}_{psk}$, $C_{pmk}$, $C_{psk}$in terms of sensitivity to departure of the process median from the target value from the most sensitive one up to the least sensitive are $C_{psk}$, $C_{pmk}$, ${C^*}_{psk}$,$C_{pm}$, $C_{pk}$, $C_{p}$.

• Journal of Korean Society for Quality Management
• /
• v.46 no.4
• /
• pp.821-842
• /
• 2018

Purpose: To derive key requirements and key technologies for weapon system acquisition business by using Qualify Function Deployment (QFD), and to reduce business cost by setting the target performance and key expense of weapon system. Methods: We propose a QFD methodology that can induce rational decision-making by translating analyst's subjective opinions into quantitative values when analyzing requirements at the initial stage of weapon system development project. Based on QFD methodology, QFD application model combining house of quality, value engineering, and analogy cost estimating technique is presented. Results: It was possible to analyze the specific requirements necessary for the development of the weapon system, to solve the communication problem of the participants, to set clear development direction and target. Conclusion: By applying the QFD application model at the early stage of the weapon system acquisition project, it is possible to reduce the business cost by establishing clear development direction and goal through the procedural analysis process.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2021

In this paper we proposed the alternative analysis of reliability design using redundancy technique. First, we presented the process for establishing the reliability design alternative analysis process considering the active redundancy and the standby redundancy. and then, the case analysis of A driving equipment was performed in accordance with the reliability design alternative analysis process presented. In case the series reliability design result is not met with the reliability target value. so, the target item for redundancy design of A driving equipment were selected as items with a severity of two or higher. The redundancy design applied with active and standby redundancy techniques were analyzed using BlockSim software. As a result, it was analyzed that reliability design to active redundancy with one of two elements required for A driving equipment is the most efficient compared to the target value of reliability. The results of this study can be usefully used before the reliability design is performed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.488-493
• /
• 2022

Generally, diamond-like carbon films (a-C:H, DLC) have been shown to have a low coefficient of friction, a high hardness and a low wear rate. Pd-doped C thin film was fabricated using a dual magnetron sputtering with two targets of graphite and palladium. Graphite target RF power was fixed and palladium target RF power was varied. The structural, physical, and surface properties of the deposited thin film were investigated, and the correlation among these properties was examined. The doping ratio of Pd increased as the RF power increased, and the surface roughness of the thin film decreased somewhat as the RF power increased. In addition, the hardness value of the thin film increased, and the adhesive strength was improved. It was confirmed that the value of the contact angle indicating the surface energy increases as the RF power increases. It was concluded that the increase in RF power contributed to the improvement of the physical properties of Pd-doped C thin film.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.307-312
• /
• 2002

For accuracy of an experiment, measure changing of grounding resistance by short period after construction and investigated the efficiency of grounding's different methode of parallel connection. We could confirm on measurement's accuracy, error through comparing the theoretical value and measured value. Therefore, reduction ratio can be expected from execution measurement to receive a target resistance value. By the result, we could evaluate the method of rod grounding electrode's proper execution

• Journal of Korean Home Economics Education Association
• /
• v.27 no.2
• /
• pp.137-147
• /
• 2015

The target pattern is introduced for practicing a balanced dietary menu planning, but Korean soup and stew, cooked with several kinds of materials, have a problem with food group assignment in the target pattern. This study thus set out to calculate the representative nutritional values of Korean soup and stew based on intake(by 2010 Korean National Health and Nutrition Examination Survey, age group of 13~19) and preference(by select the 3 kinds of favorite soup and stew each). Total of 235 middle school students were participated by way of questionnaire, and data were analyzed. Representative energy value of vegetable soup and stew by intake were $65kca{\ell}$ and $116kca{\ell}$, respectively, which were very much different with the vegetable group representative energy value of $14kca{\ell}$ in target pattern. Representative energy value of meat fish egg legume soup and stew by intake were $149kca{\ell}$ and $211kca{\ell}$, respectively, which were very much different with the representative meat fish egg legume energy value of $94kca{\ell}$ in target pattern. As result, it is not proper to assign vegetable soup stew to vegetable food group and meat fish egg legume soup stew to meat fish egg legume food group. Representative energy values of soup and stew by preference were not much different except meat fish egg legume soup($149kca{\ell}$ by intake, $218kca{\ell}$ by preference). As conclusions, it maybe desirable to categorize soup and stew as independent food group. For more accurate energy adjustment in menu planning, devide soup and stew, and further divide to vegetable and meat fish egg legume groups may necessary.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.392-401
• /
• 2021

When a data file is shared through various methods on the Internet, the data file may be damaged in various cases. To prevent this, some websites provide the checksum value of the download target file in text data type. The checksum value provided in this way is then compared with the checksum value of the downloaded file and the published checksum value. If they are the same, the file is regarded as the same. However, the checksum value provided in text form is easily tampered with by an attacker. Because of this, if the correct checksum cannot be verified, the reliability and integrity of the data file cannot be ensured. In this paper, a checksum value is generated to ensure the integrity and reliability of a data file, and this value and related file information are stored in the blockchain. After that, we will introduce the research contents for designing and implementing a system that provides a function to share the checksum value stored in the block chain and compare it with other people's files.

• Journal of Information Processing Systems
• /
• v.2 no.1
• /
• pp.23-27
• /
• 2006

This paper presents a feature selection technique based on distributional differences for efficient machine learning. Initial training data consists of data including many features and a target value. We classified them into positive and negative data based on the target value. We then divided the range of the feature values into 10 intervals and calculated the distribution of the intervals in each positive and negative data. Then, we selected the features and the intervals of the features for which the distributional differences are over a certain threshold. Using the selected intervals and features, we could obtain the reduced training data. In the experiments, we will show that the reduced training data can reduce the training time of the neural network by about 40%, and we can obtain more profit on simulated stock trading using the trained functions as well.