• 한국군사과학기술학회지
• /
• 제18권3호
• /
• pp.253-259
• /
• 2015

This paper introduces a signal processing technique for discrimination of missile target. In order to detect and discriminate the target, a seeker radar makes use of chirp waveform and stretch processing to generate high resolution range profiles(HRRPs). RELAX(relaxation) algorithm, which is one of the spectral estimation techniques, was used to find scattering centers of a missile from HRRP. From the information on the distribution of one-dimensional(1-D) scattering centers on a target, we can discriminate the target without noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.364-369
• /
• 2012

The vehicle sound classified into driving sound due to power-train, operating sound due to electric motor like sunroof, door lock and electronic sound. These vehicle sound has various features depend on the characteristic of sound that user required. And it based on cultural and regional difference of user. In this study, the user required vehicle sound characteristics for luxury sedan was investigated in overall viewpoint. And virtual target sound was developed through the result of user preference investigation. Next, Jury test was carried out in Germany, USA and Korea for evaluating the target sound. And the regional and individual difference of preference was analyzed through the result of jury test. This result of research will be contributed to design of vehicle sound quality and target sound setting.

• 품질경영학회지
• /
• 제24권1호
• /
• pp.50-60
• /
• 1996

Though the quality characteristics within a specified tolerance are equally desired quality there is a difference in conformance between a specification limit and a target value. In this paper we propose a measure of process capability that takes into account the degree of conformance to a target value as well as the process variation.

• 품질경영학회지
• /
• 제25권2호
• /
• pp.28-46
• /
• 1997

This paper considers robust design strategies for off-line quality control, with the use of experimental design and response surface methodology, in situations where all products have multiple quality characteristics. These strategies can be developed using the desirability concept of desirability functions to determine the settings of the design factors, not only to get the average performances on target but also to minimize variability around the target values.

• 품질경영학회지
• /
• 제30권3호
• /
• pp.66-78
• /
• 2002

Process capability indices are being used as indicators for measurements of process capability for SPC of quality assurance system in industries. In view of the enhancement of customer satisfaction, process capability indices in which loss functions are used to deal with the economic loss In the processes deviated from the target, are in an adequate representation of the customer's perception of quality In this connection, the loss function has become increasingly important in quality assurance. Taguchi uses a modified form of the quadratic loss function to demonstrate the need to consider the proximity to the target while assessing its quality. But this traditional quadratic loss function is inadequate to assessing the quality and quality improvement since different processes have different sets of economic consequences on the manufacturing, Thereby, a flexible approach to the development of the loss function needs to be desired. In this paper, we introduce an easily understood loss function, based on reflection of probability density function of the normal distribution. That is, the Reflected Normal Loss function can be adapted to an asymmetric loss as well as to a symmetric loss around the target. We propose that, instead of the process variation, a new capability index, CpI using the Reflected Normal Loss Function that can accurately reflect the losses associated with the process and a new capability index CpI Is compared with the classical indices as $C_{p}$ , $C_{pk}$, $C_{pm}$ and $C_{pm}$ $^{+}$.>.+/./.

• 농촌계획
• /
• 제26권4호
• /
• pp.53-65
• /
• 2020

This study aimed to provide a basic information for managing the water quality of national and regional 1st rivers in Gyeongnam by analyzing the emerging hot spot patterns in BOD, T-P, and TOC, and by grouping the changing trends into clusters. The emerging hot spot analysis for each water quality item was implemented in ArcGIS Desktop with monthly water quality data from 96 water environmental monitoring stations in Gyeongnam, and then four patterns of water quality change were classified by the K-mean cluster analysis. As for BOD, persistent cold spot pattern covered about 42.9% of target rivers, and T-P concentration tended to be low or be getting lower at over 70% of target rivers. While, for TOC, about 70% of target rivers resulted in oscillating hot spots. In addition, the cluster analysis showed that the downstream of Nakdong river had the top priority in terms of water quality management because of the increasing concentration for all the three water quality.

• 한국환경과학회지
• /
• 제26권4호
• /
• pp.433-445
• /
• 2017

In recent years, the United States has used the Load Duration Curve (LDC) method to identify water pollution problems, considering the size of the pollutant load in the entire stream flow condition to effectively evaluate Total Maximum Daily Loads (TMDLs). A study on the improvement of the target water quality evaluation method was carried out by comparing evaluations of two consecutive years of water quality and LDC data for 41 unit watersheds (14 main streams and 27 tributaries). As a result, the achievement rate of the target water quality evaluation method, according to current regulations, was 68-93%, and that by the LDC method was 82-93%. Evaluating the target water quality using the LDC method results in a reduction in the administrative burden and the total amount of planning as compared to the current method.

• 한국물환경학회지
• /
• 제29권5호
• /
• pp.630-640
• /
• 2013

It is one of the most critical steps identifying impaired waterbodies exactly in the selection of target water quality indicators for the management of Total Maximum Daily Loads (TMDLs). Excess ratio and excess level were applied and analyzed by the stream zone basis in order to evaluate water impairment for Nakdong, Geum, Youngsan and Seomjin rivers. Each river basin was divided into stream zones in the light of its watershed and waterbody characteristics. Selected water quality parameters discussed in this study were pH, DO, BOD, COD, SS, T-P, T-Coli and F-Coli. The excess ratios of the water quality parameters were used to discriminate water bodies that did not meet water quality standards. The excess levels were used to classify the degradation of water quality. The excess ratios and the excess levels to the water quality criteria of the medium influence areas were used for each stream zone. The results indicate that the excess ratios and the excess levels are varied on the stream zone in each river basin. Three parameters, pH, DO and SS, met water quality standards in all stream zones. The other five parameters indicated very high excess ratios in most waterbodies, and especially T-P and T-Coli revealed to be very high excess levels in some waterbodies. These parameters could be considered as major target indicators for the management of TMDLs.

• 한국습지학회지
• /
• 제20권2호
• /
• pp.136-144
• /
• 2018

환경부에서는 유역단위의 통합 물관리를 위하여 물환경관리계획, 수질오염총량제 등을 실시하고 있으며, 측정망에서 측정된 수질을 이용하여 설정된 목표수질의 달성 정도를 판단하고 있다. 유역 하류부에 위치한 측정망의 지점에서의 수질 농도는 유역의 각 지류에서 오염원 유입과 하천의 자정작용 등의 복잡한 메커니즘을 거쳐서 만들어진 결과물이다. 이에 본 연구에서는 유역의 오염원 추적 및 초과율을 이용해 본류 및 지류의 수질이 목표수질 지점에 미치는 영향의 정도에 대하여 분석하였다. 이를 위해 오염총량제의 대상물질인 BOD와 T-P를 포함한 총 6가지의 수질항목에 대하여 FDC와 초과율 분석을 수행하였고, 이를 통해 목표수질 지점에 유황별 영향을 미치는 수질항목 및 지점을 도출할 수 있었다. 본 연구에서 제시한 FDC 분석을 통한 오염원 추적은 목표수질 달성을 위해 지류별 수질관리 전략을 보다 효율적으로 수립할 수 있을 것이다.

• 한국환경과학회지
• /
• 제5권3호
• /
• pp.377-385
• /
• 1996

This study aims at the estimation of a river management flow in urban basin analyzing Sinchun basin to be the tributary of Kumho river basin. The river management flow has to satisfy a low flow as natural flow and an environmental preservation flow estimated by a dilution flow to satisfy a target water quality in drought flow. Therefore for the estimation of a river management flow in Sinchun in this study, first Tank model as a basin runoff model estimates a low flow, a drought flow from a flow duration curve in Sinchun, second QUAL2E model as water quality model simulates water quality in Sinchun and estimates environmental preservation flow to satisfy a target water qua%its, BOD 8 mg/l by a dilution flow derived from Kumho river, Nakdong river and around water. And the river management flow is estimated by addition of a use flow and a loss flow to more flow between a low-flow and an environmental preservation flow.