• Journal of Environmental Impact Assessment
• /
• v.21 no.4
• /
• pp.543-552
• /
• 2012

Namgang mid-watershed is located in downstream of Nakdong river basin. There are many pollution sources arround this area and it's control is important to manage a water quality of Nakdong river. A target year of Namgang mid-watershed water environment management plan is 2013. To predict a water quality at downstream of Namgang, we have investigated and forecasted the pollutant source and it's loading. There are some plan to construction the sewage treatment plants to improve the water quality of Nam river. Those are considered on predicting water quality. As results, it is shown that the population is 343,326 and sewerage supply rate is 79.2% and the livestock is 1,662,000 in Namgang mid-watershed. It is estimated that the population is 333,980, the sewerage supply rate is 86.9% in 2013. The milk cow and cattle were estimated upward and the pigs were downward by 2013. The generated loading of BOD and TP is 75,957 kg/day and 4,311 kg/day, discharged loading is 18,481 kg/day and 988 kg/day respectively in 2006. It were predicted upward the discharged loading of BOD and TP by 4.08% and 6.3% respectively. The results of water quality prediction of Namgang4 site were 2.5 mg/L of BOD and 0.120 mg/L of TP in 2013. It is over the target water quality at that site in 2015 about 25.0% and 9.1% respectively. Consequently, there need another counterplan to reduce the pollutants in that mid-watershed.

• Journal of Korean Society on Water Environment
• /
• v.28 no.6
• /
• pp.933-942
• /
• 2012

The purpose of this study is to evaluate the degree of waterbody impairment according to the flow conditions and present to the appropriate water quality improvement alternatives using observed water quality and flow for Total Maximum Daily Load (TMDL) implementation at 39 unit watersheds the nakdong river basin. Observed water quality data for 7 years are divided into five cumulative flow frequency group and comparing the each observed water quality data and TMDL Target water quality (TWQ) the last evaluate the water quality is impaired group. We found that the cumulative flow frequency group-specific the average excess rate of V group was the highest (32.86%), followed by the IV group (26.04%), group III (23.36%), II group (22.67%), I group (20.70%), the degree of impaired waterbody tended to be inversely proportional to the flow rate. Resulted from cumulative flow frequency group of impaired water quality assessment, 13 unit watersheds are impaired from a group IV and group V affected by point sources. Therefore, improvement of sewage discharge and the initial composition of the riparian buffer zone are needed. Nakbon F, Namkang D and Namkang E within 13 unit watersheds are impaired from group II and III affected by non-point sources. Therefore, application of Best Management Practices (BMPs) is needed for these watersheds. Evaluation of impaired waterbody using Cumulative flow frequency group is able to determine the extent of the judgment to TWQ exceeded by the flow conditions and helps proper setting Standard flow and planning pollutant reduction for TMDL.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.541-546
• /
• 2020

The surveillance radar for naval ships is an essential equipment of a battle system that executes the detection and tracking of targets, and the shooting support function; it calculates the three-dimensional track of the target range, azimuth, and altitude to carry out its duty. The surveillance radar consists of an antenna, a transceiver, a processing unit, and an air dryer section. The radar radiates the transmission signal on the antenna section, receives the reflected signal from the target, and amplifies the signals on the transceiver section. The signal received from the antenna is used to provide the operator with target information in various ways. This study identified the display problems when the information about the target is displayed through the radar. The causes of the problems were analyzed and improved. The tracking disappearance phenomenon caused by the altered-course of the ship was improved on the TWS tracking algorithm. The validity of the improved TWS tracking algorithm was confirmed by the normal condition of the target status on the B-scope.

• The Journal of Korean society of community based occupational therapy
• /
• v.8 no.2
• /
• pp.15-28
• /
• 2018

Objective : This study sought to characterize and determine the qualitative level of a single target study for stroke patients. Methods : The National Science and Technology Information Center (NDSL), DBpia (DBpia), RISS (Radical Research Information Service), Korea Research Information (KISS), and the National Assembly Library's original case study from 2002 to 2017. A total of 24 single target research papers were selected through the screening process to analyze the quality level of research methods and research design. Results : ABA design was th most common study design method. One person was the most with 12(50%). and three were the second with 8(33.3%). Imagination was the most used as an independent lawyer. Dependent variables had the highest level of situability and one-sidedness. The study was also conducted with a variety of target behaviors, including 'memory', 'visual attention', 'dysphagia', 'visual-motor coordination', 'balance', 'activity of daily life' and 'edema' behaviors. It also showed a positive effect on all dependent variables. The Qualitative level was found to be above the intermediate level except for one study. Conclusion : It is academic significance that this study analyzes the items to be prepared for in the performance of a single target study and further studies may require the establishment of a weak but good-quality single target study for researchers conducting research in local communities and clinical sites.

• Korean Journal of Community Nutrition
• /
• v.19 no.3
• /
• pp.274-282
• /
• 2014

Objectives: The objective of this study was to revise the target pattern in food guidance system for adolescents' balanced menu planning. Methods: The food groups in the target pattern were divided into detailed food items, and intake number were assigned to each food items based on the revised standard food composition table. The validity of revised target pattern was examined. Menu planning according to the revised target pattern was made available to 305 male and female middle school students and the nutritional assessment of the menu plan were carried out using SPSS WIN 12.0. Results: The energy contents, energy contribution ratios of carbohydrate, fat, and protein, and 4 minerals' and 6 vitamins' contents of the revised target pattern were adequate. The average energy contents of the menu planned according to revised target pattern were 400~500 kcal higher than that of the revised target pattern when the revised standard food composition was applied. The energy contribution ratios of fat were 28.9%, close to maximum of acceptable macronutrient distribution range (AMDR) (30%), and that of carbohydrate were 54.5%, lower than minimum of AMDR (55%). The nutrient adequacy ratios (NARs) of calcium and vitamin C were less than 1.0. According to index of nutritional quality (INQ) of food items, kimchi, milk dairy products, and soybean curd were energy efficient source for calcium, kimchi, fruit, vegetable and seaweed were energy efficient source for vitamin C, with INQ of food items were higher or close to 2.0. Kimchi was the best energy efficient source of calcium and vitamin C. Conclusions: Revised target pattern based on the adolescent's foods intake was not good enough for balanced menu planning by adolescents, because what they ate and what they wanted to eat were very much different. Detailed guidance for food selection is necessary in each food items.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.4
• /
• pp.415-426
• /
• 2019

In this paper, we discussed automatic target tracking algorithms for diver detection sonar that observes penetration forces of coastal military installations and major infrastructures. First of all, we analyzed sea trial data in diver detection sonar and composed automatic target tracking algorithms based on track existence probability as track quality measure in clutter environment. In particular, these are presented track management algorithms which include track initiation, confirmation, termination, merging and target tracking algorithms which include single target tracking IPDAF (Integrated Probabilistic Data Association Filter) and multitarget tracking LMIPDAF (Linear Multi-target Integrated Probabilistic Data Association Filter). And we analyzed performances of automatic target tracking algorithms using sea trial data and monte carlo simulation data.

• Journal of Korea Multimedia Society
• /
• v.17 no.8
• /
• pp.923-936
• /
• 2014

Images can be contaminated with different types of noise, for different reasons. The neighborhood averaging and smoothing by image averaging are the classical image processing techniques for noise removal. The classical spatial filtering refers to the aggregate of pixels composing an image and operating directly on these pixels. To reduce or remove effectively noise in image sequences, it usually needs to use noise reduction filter based on space or time domain such as method of spatial or temporal filter. However, the method of spatial filter can generally cause that signals of objects as the target are also blurred. In this paper, we propose temporal filter using the piece-wise quadratic function model and enhancement algorithm of image quality for the performance improvement of target detection and tracking by heterogeneous noise reduction. Image tracking simulation that utilizes real IIR(Imaging Infra-Red) images is employed to evaluate the performance of the proposed image processing algorithm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.6
• /
• pp.593-600
• /
• 2013

The asymmetric pulsed DC reactive magnetron sputtering system is widely used for the high quality plasma sputtering process such as a thin film deposition. In asymmetric pulsed DC power supply a reverse voltage is applied to the target periodically to minimize arc discharging effect. When sputtering in the mid-frequency range (20-350 kHz), the periodic target voltage reversals suppress arc formation at the target and provide long-term process stability. Thus, high quality, defect-free coatings of these materials can now be deposited at competitive rates. In this paper, a new style asymmetric pulsed DC power supply including mid-transformer is presented. In the proposed, an energy recovery circuit is adopted to reduce the mutual inductance of the transformer. As a result, the system dynamics of the voltage control loop is increased highly and the non-linear voltage boosting effect of the conventional system is removed. This work was proved through simulation and laboratory based experimental study.

• Journal of Korean Society for Quality Management
• /
• v.26 no.1
• /
• pp.48-60
• /
• 1998

This paper proposes a fourth generation index $C_{psk}$, constructed from $C_{psk}$, by introducing the factor｜$\mu$-T｜ in the numerator as an extra penalty for the departure of the process mean from the preassigned target value T. The motivation behind the introduction of $C_{psk}$ is that when $T\neqM$ process shifts away from target are evaluated without respect to direction. All indices that are now in use assume normally distributed data, and any use of the indices on non-normal data results in inaccurate capability measurements. In this paper, a new process capability index $C_{psk}$ is introduced for non-normal process. The Pearson curve and the Johnson curve are selected for capability index calculation and data modeling the normal-based index $C_{psk}$ is used as the model for non-normal process. A significant result of this research find that the ranking of the six indices, $C_{p}$, $C_{pk}$, $C_{pm}$, ${C^*}_{psk}$, $C_{pmk}$, $C_{psk}$in terms of sensitivity to departure of the process median from the target value from the most sensitive one up to the least sensitive are $C_{psk}$, $C_{pmk}$, ${C^*}_{psk}$,$C_{pm}$, $C_{pk}$, $C_{p}$.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.139-153
• /
• 2020

Using a computationalfluid dynamics(CFD) model, thisstudy evaluated the representativeness of an air quality monitoring system (AQMS) in an urban area and presented a methodology to determine the suitable AQMS locations for specific purposes. For this, we selected a 1.6 km × 1.6 km area around the Eunpyeong-gu AQMS (AQMS 111181) as a target area. We conducted simulationsfor two emission scenarios (scenario one: air pollutants transported from inflow boundaries, scenario two: air pollutants emitted from roads). Urban airflows were markedly influenced by mountainous terrain located in the northeast and southeast of the target area, and complicated airflow patterns occurred around the buildings. The distributions of air pollutants were dependent on the terrain (mountain) in scenario one, but the road location and building height in scenario 2. We evaluated whether the AQMS could represent the air quality in the target area based on the simulations for two scenarios. The concentrations simulated at the AQMS were similar in magnitude to the layer mean concentrations, which indicated good representativeness for the air quality in the target area. We also suggested which locations were suitable for different measurement purposes (hot spots, clean zones, average zones, shelter zones, equi-background zones).