• Journal of electromagnetic engineering and science
• /
• v.12 no.3
• /
• pp.216-222
• /
• 2012

This paper presents a single-pole eight-throw switch, based on an eight-way power divider, using substrate integrate waveguide(SIW) technology. Eight sectorial-lines are formed by inserting radial slot-lines on the top plate of SIW power divider. Each sectorial-line can be controlled independently with high level of isolation. The switching is accomplished by altering the capacitance of the varactor on the line, which causes different input impedances to be seen at a central probe to each sectorial line. The proposed structure works as a switching circuit and an eight-way power divider depending on the bias condition. The change in resonant frequency and input impedance are estimated by adapting a tapered transmission line model. The detailed design, fabrication, and measurement are discussed.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.21-26
• /
• 2002

In the conventional star coupler, a certain amount of loss should be expected because lateral diffraction is used for the power distribution. In this paper, we propose a new design of a low loss star coupler which employs UV-written tapered waveguides and an AWG based on the low loss star couplers, and investigate their various characteristics. The loss of the UV-written star coupler is lower than that of the conventional star coupler, and the AWG device based on the UV-written star couplers shows low loss characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.167-177
• /
• 1996

The cutoff frequencies of a double ridged rectangular waveguide are calculated by applying the modal analysis to its cross-section. And the characteristic impedance of its $TE_{10}$ mode is evaluated in a frequency range of 6 to 18 GHz. When both ends of a linearly tapered rectangular wa- veguide consists of single and double ridged rectangular cross-sections, the equivalent nonuniform transmission line of its $TE_{10}$ mode is solved numerically. It is shown that the input impedance at its single ridged terminal becomes nearly constant in the wide bandwidth.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.565-568
• /
• 2007

In this paper, we designed and fabricated a broadband probe with a double-ridged waveguide for broadband near-field measurements. An exponentially tapered ridge in the rectangular waveguide and a novel waveguide transition were used for broadband impedance matching. The probe has broadband characteristics and its measured impedance bandwidth is approximately 123% (4.17:1) in the range 12.0-50 GHz for standing wave ratios (SWR) < 3.0. The peak radiation gain range and nominal radar cross-section (RCS) are 5.7-14.3 dBi. The performance of this probe was verified using the measured results and is in good agreement with the simulated results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.53-59
• /
• 2002

In this paper, we present design results for an orthomode transducer(OMT) to be used in multi-band antenna feeds. The OMT is realized in the form of a tapered square waveguide, where 18-20 GHz ports are placed in the taper region normal to the waveguide axis, while 30-45 GHz ports are placed in line with the waveguide axis. The reflection coefficient of each port is designed to be less than 20 dB, while the isolation between ports are greater than 15 dB. Thin septa are placed in side ports to reduce the effect of side ports on the return loss of the in-line port. The commercial software HFSS？ is used to design the whole structure.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.47-54
• /
• 2020

Integration of active and passive waveguides is an essential component of the photonic integrated circuit and its elements. Butt joint is one of the important technologies to accomplish it with significant advantages. However, it suffers from high optical loss at the butt joint junction and need of accurate process control to align both waveguides. In this study, we used beam propagation method to simulate an integrated device composed of a laser diode and spot size converter (SSC). Two SSCs with different mode properties were combined with laser waveguide and optical coupling efficiency was simulated. The SSC with larger near field mode showed lower coupling efficiency, however its far field pattern was narrower and more symmetric. Tapered passive waveguide was utilized for enhancing the coupling efficiency and tolerance of waveguide offset at the butt joint without degrading the far field pattern. With this technique, high optical coupling efficiency of 89.6% with narrow far field divergence angle of 16°×16° was obtained.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.261-273
• /
• 2014

In this paper, metal insulator metal (MIM) plasmonic slot cavity narrow band-pass filters (NBPFs) are studied. The metal and dielectric of the structures are silver (Ag) and air, respectively. To improve the quality factor and attenuation range, two novel NBPFs based on tapered structures and double cavity systems are proposed and numerically analyzed by using the two-dimensional (2-D) finite difference time domain (FDTD) method. The impact of different parameters on the transmission spectrum is scrutinized. We have shown that increasing the cavities' lengths increases the resonance wavelength in a linear relationship, and also increases the quality factor, and simultaneously the attenuation of the wave transmitted through the cavities. Furthermore, increasing the slope of tapers of the input and output waveguides decreases attenuation of the wave transmitted through the waveguide, but simultaneously decreases the quality factor, hence there should be a trade-off between loss and quality factor. However, the idea of adding tapers to the waveguides' discontinuities of the simple structure helps us to improve the device total performance, such as quality factor for the single cavity and attenuation range for the double cavity. According to the proposed NBPFs, two, three, and four-port power splitters functioning at 1320 nm and novel ultra-compact two-wavelength and triple-wavelength demultiplexers in the range of 1300-1550 nm are proposed and the impacts of different parameters on their performances are numerically investigated. The idea of using tapered waveguides at the structure discontinuities facilitates the design of ultra-compact demultiplexers and splitters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.669-676
• /
• 2003

In this paper, a novel design method for an ultra-wide band TEM horn antenna is proposed on the basis of parallel plate waveguide theory. A principle of TEM modes generation is analyzed and the characteristics of this antenna are experimentally investigated. The proposed TEM horn antenna has an exponentially tapered structure to increase matching bandwidth. Also, the designed TEM horn has shortened length but increased aperture so that the bandwidth for cutoff frequency is increased. The measured result show that the proposed TEM hem antenna has the frequency band of 75 MHz to 1200 MHz for VSWR less than 2.0 and the bandwidth of the TEM horn becomes more than twice comparing to that of a linearly tapered TEM hem. It is anticipated that the manufactured antenna is applicable to UWB systems for impulse response measurement.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.3
• /
• pp.240-245
• /
• 2004

Torsional characteristics of nonuniform circular waveguides were studied experimentally by using an in-plane laser vibrometer. The circumferential displacement along the axis of a rod was measured as a response of the torsional oscillation excited at one end of the rod. The experimental results obtained for a stepped circular rod and a conically-tapered rod were compared with theoretical predictions. The results of this paper show the possibility of using the in-plane laser vibrometer for the measurement of torsional vibrations.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.386-396
• /
• 2013

A 10-Gbit/s wireless communication system operating at a carrier frequency of 300 GHz is presented. The modulation scheme is amplitude shift keying in incoherent mode with a high intermediate frequency (IF) of 30 GHz and a bandwidth of 20 GHz for transmitting a 10-Gbit/s baseband (BB) data signal. A single sideband transmission is implemented using a waveguide-tapered 270-GHz high-pass filter with a lower sideband rejection of around 60 dB. This paper presents an all-electronic design of a terahertz communication system, including the major modules of the BB and IF band as well as the RF modules. The wireless link shows that, aided by a clock and data recovery circuit, it can receive $2^7$-1 pseudorandom binary sequence data without error at up to 10 Gbit/s for over 1.2 m using collimating lenses, where the transmitted power is 10 ${\mu}W$.