• Journal of Pharmaceutical Investigation
• /
• v.35 no.4
• /
• pp.243-247
• /
• 2005

Although many scientists have used pectin, its feasibility in terms of tablet manufacturability with a high speed machine has never been evaluated. Therefore, compactibility of different pectin types for large scale tableting operation has been evaluated. The compactibility behavior of powder pectins was studied by a compaction simulator. It was found that pectin on its own does not produce tablets of acceptable quality even at a punch velocity as low as 20 rpm (e.g. low tensile strengths, capping and lamination irrespective of applied compression force). Thus, dwell time was introduced and more hard compact was produced as relaxation time in die increases. It was concluded that frequent structural failure observed in both pectin types was due to lack of plastic deformation, poor compactibility and high elastic recovery.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.3
• /
• pp.151-155
• /
• 2005

A drug delivery system(DDS) for practically insoluble meloxicam was developed and evaluated by dissolution study. A novel DDS is two layered system, where the first layer is consisted of gas-forming agent for an immediate release and the second layer is composed of metolose SR(HPMC) for sustained release. This bilayered tablets were manufactured by using manual single punch machine. The results of dissolution study showed an initial burst release followed by sustained release for the experimental period time. From a pharmaceutical point of view, the designed DDS for meloxicam would be informative system in terms of poorly soluble analgesic medicines.

• Journal of Pharmaceutical Investigation
• /
• v.3 no.1_2
• /
• pp.34-50
• /
• 1973

There are many reports on the stability of drugs in powders and tablets. The stabilities of ascorbic acid in the antacid preparations, such as calcium carbonate, magnesium carbonate, magnesium trisilicate, magnesium alumino silicate, and dried aluminum hydroxide gel under various humidities were examined. From the result of the experiment, it was assumed that the concentration of ascorbic acid, the amount of water-vapor sorption, and the physical character of the antacid ingredients were the main factors, influencing the degradation of ascorbic acid. The ascorbic acid, mixed with carbonates, such as calcium carbonate, was degradaded rapidly, while the preparation with dried aluminum hydroxide gel was slightly degraded after 10 days. A 2% ascorbic acid in the prepation was rapidly degraded than 10% ascorbic acid in the preparation.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.4
• /
• pp.321-325
• /
• 2002

IVIVC (In vitro/in vivo correlation) is useful for predicting in vivo results from in vitro data. The aim of this study was to develop IVIVC of sustained release diltiazem. For this purpose, three types of diltiazem tablets with different in vitro dissolution rates were prepared. An in vitro dissolution testing method comprising of paddle apparatus, 50 rpm, water as dissolution medium was developed. Under these condition, we demonstrated that AUCinf could be predicted by evaluating $d_{70%}$ (time dissolved 70%) in vitro since the in vivo AUCinf was correlated with the in vitro $d_{70%}$ (r=-0.9981).

• Journal of Nutrition and Health
• /
• v.30 no.6
• /
• pp.727-732
• /
• 1997

Dietary supplements are generally defined as concentrated sources of nutrients prescribed in addition to the daily diet to increase nutrient intake. These supplements are usually in the form of tablets, capsules, pills, powders, or liquids. Sales of dietary supplements are roughly $4 billion per year in the United States. Nearly 4 out of every 10 adults use dietary supplements regularly. This article is to report the pros and cons in the use of dietary supplements and a brief overview of current law, proposed regulations, and related activities in the United States. It provides what information should be known to the public before federal regulations governing health claims are made . These regulations may decide whether health food industries or pharmaceutical companies can make claims about the function of nutrients.

• Archives of Pharmacal Research
• /
• v.27 no.8
• /
• pp.820-824
• /
• 2004

An optical purity test was indirectly performed on (S)-ibuprofen as its diastereomeric (R)-(+)-1-phenylethylamide derivative using achiral gas chromatography (GC). The method for the determination of trace (R)-ibuprofen (optical impurity), within the range 1.0 to 50 ng, from a racemic ibuprofen standard was linear (r＝0.9997) with acceptable precision (％ $RSD{\leq}5.3$) and accuracy (％ RE＝0.7~-3.9). Similar results were obtained with the method validation for the quantification of (S)-ibuprofen within the range 0.1 to 2.0 $\mu\textrm{g}$ using a (S)-ibuprofen stan-dard. When applied to seven different commercial (S)-ibuprofen products, their optical purities (98.7~99.1％) were determined with good precision (％ $RSD{\leq}4.0$).

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.38-42
• /
• 2008

The voltammetic behavior of Vitamin B6 (VB6) was studied at a glassy carbon electrode in phosphate buffers using cyclic, linear sweep and differential pulse voltammetry. The oxidation process was shown to be irreversible over the entire pH range studied (4.0-10.0) and was adsorption controlled. The adsorption amount of VB6 on the glassy carbon electrode was examined by chronocoulometry and the value of n, product of transfer coefficient and number of electrons transferred in the rate determining step, was determined from Tafel plot. VB6 was determined by differential pulse voltammetry and the peak current was found linearly with its concentration in the range of 3 10-7-2 10-4 mol L-1. The detection limit was 1 10-7 mol L-1. The procedure was successfully applied for the assay of VB6 in tablets.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2727-2731
• /
• 2011

A new method for the determination of josamycin has been developed based on quenching of the fluorescence of 3-mercaptopropionic acid-capped CdTe quantum dots (MPA-CdTe QDs) by josamycin in ethanol. Reaction time, interfering substances on the fluorescence quenching, and mechanism of the interaction of CdTe QDs with josamycin were investigated. Under optimum conditions, the relative fluorescence intensity was linearly proportional to the concentration of josamycin between 12.0 and 120.0 ${\mu}g\;mL^{-1}$ with a correlation coefficient of 0.9956 and a detection limit of 2.5 ${\mu}g\;mL^{-1}$. The proposed method was successfully applied to commercial tablets, and the results were satisfactory, i.e. consistent with those of high-performance liquid chromatography (HPLC).

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.4
• /
• pp.41-45
• /
• 2013

Modern electronic devices such as tablets and smartphones are getting more powerful and efficient. The demand in feature sets, functionality and usability increase exponentially and this has posed a great challenge to the design of a power distribution network (PDN). Power rails merging is a popular option used today in a PDN design as numerous power rails are no longer feasible due to form factor limitation and cost constraint. In this paper, the criteria and limitations for power rails merging are discussed. Despite having all the advantages such as pin count reduction, decoupling capacitors sharing, lower impedance and cost saving, power rails merging can however, introduce coupling noise to the system. In view of this, a PDN design with power rails merging that fulfills design recommendations and specifications such as noise target, power well placement, voltage supply values as well as power supply quadrant assignment is extremely important.

• Korean Journal of Pharmacognosy
• /
• v.17 no.1
• /
• pp.1-6
• /
• 1986

A cardiac principle of Aconiti tuber, higenamine was analyzed with a differential pluse voltammetry employing a glassy carbon electrode. The peak potentials for the oxidation of higenamine were varied depending on the pH of the media. Higenamine at the concentration of $5.4{\times}10^{-7}M$ (0.146ppm) was easily determined using a pH 7.0 phosphate buffer. The amounts of higenamine in the crude Aconiti tuber and tablets containing A. tuber were determined by a standard addition method after extracting with methanol, partitioning with a mixture of $H_2O$ and $CHCl_3$, and freeze-drying the aqueous layer.