• Journal of Environmental Health Sciences
• /
• v.34 no.4
• /
• pp.333-341
• /
• 2008

In this study, the possibility and the optimal conditions for treating slurry type piggery wastewater using supercritical water oxidation were tested in the laboratory. The results could be summarized as follows; The slurry type piggery wastewater, which was diluted 50 times, was treated most effectively at the pressure of 300 bar, the temperature of $550^{\circ}C$ and the residence time of 10 minutes. The air saturated water was injected, as an oxidizing agent, and the removal efficiencies of $COD_{Cr}$, T-N, $NH_4^+$-N and T-Pattheoptimal conditions were 92, 40, 59 and 100%, respectively. Therefore, analte rnativemea suremu stbetaken to improve theremo valefficiency of the nitrogen compounds.

• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.1
• /
• pp.75-84
• /
• 2001

Hot gas filtration method via using ceramic filters is an evolving technology applicable to numerous industrial and air pollution control processes. Alumino silicate, organic and inorganic binders were the major raw materials in manufacturing ceramic filters. In this work, disc type ceramic filters(50$\phi$$\times$10t) were manufactured by vacuum forming processes using ceramic raw materials. The porosity and bulk density of disc type ceramic filers ranged from 86 to 89% and from 0.27 to 0.36 g/㎤, respectively. In this work disc type ceramic medium were tested utilizing coupon experimental apparatus. Disc type filters showed high collection efficiencies over 99.96% with Darchs law coefficients of 4.1$\times$10(sup)10~9.63$\times$10(sup)10/$m^2$ depending on mean pore sizes. In addition, filtration and detachment of ceramic filters turned out to be performed effectively using 10 cm/sec face velocity, 5 minutes filtration cycle, 100msec pulse jet valve opening time and 3 bar pulsing pressure.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.9
• /
• pp.427-433
• /
• 2001

A linear ultrasonic motor was designed by a combination of the first longitudinal and fourth bending mode, and the motor consisted of a straight aluminum alloys bar bonded with a piezoelectric ceramic element as a driving element. That is,$L_1-B_4$ linear ultrasonic motor can be constructed by a multi-mode vibrator of longitudinal and bending modes. Linear ultrasonic motors are based on an elliptical motion on the surface elastic body, such as bar or plates. In general, the natural resonance frequency of the stator is used as a driving frequency of the motor which provides a large elliptical motion. The corresponding eigenmode of one resonance frequency can be excited twice at the same time with a Phase shift of 90 degrees in space and time. And the rotation can be reversed by changing the phase between the two signals from sin$\omega$t to cos$\omega$t. Moreover, the tangential force pushes the slider(rotor) and, therefore, determines the thrust and speed of the motor. The experimental results of fabrication motors, bimorph-tyPe motor showed more excellent than unimorph-type. The maximum speed of TBL-200, TBL-300, TBL-400, TBL -220, TBL-310 and TBL-420 motors were 0.12, 0.37, 0.39, 0.14, 0.55 and $0.60ms6{-1}$, respectively. And the efficiency were reported 1.15, 7.9, 6.6, 2.36, 10.1 and 16.5%, respectively. That time, output thrust of the motor was a strong(1~2N) and the weight of stator was a lightness(5~7g).

• East Asian mathematical journal
• /
• v.36 no.3
• /
• pp.389-415
• /
• 2020

Let M be a semi-invariant submanifold of codimension 3 with almost contact metric structure (𝜙, ξ, η, g) in a complex space form M_n+1(c), c ≠ 0. We denote by R_ξ and R'_X be the structure Jacobi operator with respect to the structure vector ξ and be R'_X = (∇_XR)(·, X)X for any unit vector field X on M, respectively. Suppose that the third fundamental form t satisfies dt(X, Y) = 2𝜃g(𝜙X, Y) for a scalar 𝜃(≠ 2c) and any vector fields X and Y on M. In this paper, we prove that if it satisfies R_ξ𝜙 = 𝜙R_ξ and at the same time R'_ξ = 0, then M is a Hopf real hypersurfaces of type (A), provided that the scalar curvature ${\bar{r}}$ of M holds ${\bar{r}}-2(n-1)c{\leq}0$.

• East Asian mathematical journal
• /
• v.38 no.1
• /
• pp.43-63
• /
• 2022

Let M be a semi-invariant submanifold of codimension 3 with almost contact metric structure (φ, ξ, η, g) in a complex space form M_n+1(c). We denote by R_ξ the structure Jacobi operator with respect to the structure vector field ξ and by ${\bar{r}}$ the scalar curvature of M. Suppose that R_ξ is φ∇_ξξ-parallel and at the same time the third fundamental form t satisfies dt(X, Y) = 2θg(φX, Y) for a scalar θ(≠ 2c) and any vector fields X and Y on M. In this paper, we prove that if it satisfies R_ξφ = φR_ξ, then M is a Hopf hypersurface of type (A) in M_n+1(c) provided that ${\bar{r}-2(n-1)c}$ ≤ 0.

• Plant Resources
• /
• v.7 no.1
• /
• pp.39-46
• /
• 2004

To demonstrate the importance of transformation efficiency in independent event, molecular and cytogenetic analysis were conducted with genomic DNA and chromosome of transgenic plants produced by Agrobacterium tumefeciens LBA4404 (pSBM-PPGN: gusA and bar). Selection ratios of putative transgenic calli were similar in independent experiments, however, transformation efficiencies were critically influenced by the type of regeneration media. MSRK5SS-Pr regeneration mediun, which contains 5 mgL$^{-1}$ kinetin, 2% (w/v) sucrose in combination with 3% (w/v) sorbitol, and 500 mgL$^{-1}$ proline, was efficient to produce transgenic plant of rice from putative transgenic callus in the presence of L-phosphinotricin (PPT). With MSRK5SS-Pr medium, transformation efficincies of Nagdongbyeo were significantly enhanced from 3.7% to 6.3% in independent callus lines arid from 7.3% to 19.7% in plants produced, respectively. Stable integration and expression of bar gene were confirmed by basta herbicide assay, PCR amplification and Southern blotting of bar gene, and fluorescence in situ hybridization (FISH) analysis using pSBM-PPGN as a probe. In Southern blot analysis, diverse band patterns were observed in total 44 transgenic plants regenerated from 20 independent PPT resistant calli showing from one to five copies of T-DNA segments, however, the transformants obtained from one callus line showed the same copy numbers with the same fractionized band patterns.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1025-1030
• /
• 2000

Recently, surface-treatment agent was developed to restore performance of the deteriorated concrete and inhibiting corrosion of the reinforcing-bar. The performance of surface-treatment agent was verified and this agent has been broadly in America and European countries. However, this type agent has not been used broadly in Korea because performance of the agent isn't verify by a proper test method yet. In this study, we suggested our own test procedures and methods through extensive laboratory tests to verify the performance of concrete after applying the surface-treatment agent.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.424-429
• /
• 1998

Cloud-point data at $230^{\circ}C$ and 1,800 bar are presented for two poly(ethylene-co-vinyl alcohol)(PEVA) copolymers[9.9mol% and 17.8mol% vinyl alcohol(VA)] in ethylene, propane, propylene, n-butane, 1-butene, dimethyl ether(DME), and chlorodifluromethane(CDFM). The static type experimental apparatus with a view cell has been used for the experiment at the high pressure and temperature. The pressure-temperature (P-T) loops of PEVA(9.9mol% VA) copolymer-DME mixtures are presented at copolymer concentrations of 1.4wt% to 20.0wt%. Also, we presented the phase behavior of PEVA(17.8mol% VA) copolymer-DME system at copolymer concentration of 1.9wt% to 6.8wt%. The cloud-point curves for the PEVA copolymers in dimethyl ether showed single phase above 480 bar as a result of the hydrogen bonding between the vinyl alcohol unit and dimethyl ether. The pressure-concentration(P-x) isotherm loops of PEVA(9.9mol% and 17.8mol% VA)-DME system are obtained. The cloud-point curves for PEVA(9.9mol% and 17.8 mol% VA) copolymers andthe ethylene, propane, propylene, n-butane, 1-butene, and CDFM all show negative slopes of phase behavior and are located at pressures below 1,800 bar. For PEVA copolymer-DME system(9.9mol% VA), cloud-point curves show positive slopes that decrease in pressures with decrease in temperature in the temperature range of $80^{\circ}C$ to $160^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.1
• /
• pp.61-68
• /
• 2004

A reproducible transformation system via optimized regeneration media for Korean rice cultivars was established using Agrobacterium tumefeciens LBA4404 (pSBM-PPGN; gusA and bar). Although japonica rice genotypes were easier to produce transgenic plants compared to Tongil type cultivars, transformation efficiencies were not always correlated with regeneration efficiencies of non-transgenic callus on the control medium. Regeneration efficiencies of Donganbyeo, Ilmibyeo, and Manchubyeo were over 50% in non-transgenic control, however, transformation efficiencies were significantly low when only sucrose was added to the media as a carbon source. However, the medium, MSRK5SS-Pr (or MSRK5SM-Pr), that contains $5\textrm{mgL}^{-1}$ kinetin, $0.5\textrm{mgL}^{-1}$ NAA, 2 % sucrose (or maltose), 3% sorbitol, and $500\textrm{mgL}^{-1}$ proline, was the most efficient not only for regeneration of non-transgenic callus but also for regeneration of transgenic callus in the presence of L-phosphinotricin (PPT). Average transformation efficiencies of 16 Korean rice cultivars were significantly enhanced by using the optimized medium from 1.5% to 5.8% in independent callus lines and from 2.9% to 19.4% in tromsgenic plants obained. Approximately 98.9% (876 out of 885) transgenic plants obtained on optimized media showed basta resistance. Stable integration, inheritance and expression of gusA and bar genes were continued by GUS assay and PCR and Southern analysis of the bar gene. With Pst1 digestion of genomic DNA of transgenic plants, one to five copies of T-DNA segment were observed; however, 76% (19 out of 25 transgenic plants) has low copy number of T-DNA. The transformants obtained from one callus line showed the same copy numbers with the same fractionized band patterns.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.77-81
• /
• 2002

The helium recondensing type cryostat with 4 K GM cryocooler is fabricated in order to keep cryogenic state of two saddle type superconducting magnet opposite to each other designed maximum 0.3 T magnetic field, and 1270 mm diameter open bore. The current leads which consist of metal current leads made for brass sheet and HTS current leads made in American Superconductor$^{TM}$ intermediate cool down with cryocooler Thus , the cryocooler for helium recondensing is a 1.5W/4.2 K GM SUMITOMO cryocooler. While superconducting magnet is working of 1600 gauss to 200 A, the cryostat keep constantly the level of liquid helium at 0.05 bar gauge pressure.e.