• Macromolecular Research
• /
• 제17권4호
• /
• pp.276-279
• /
• 2009

• Carbon letters
• /
• 제11권2호
• /
• pp.90-95
• /
• 2010

Carbon materials such as graphite and graphene exhibit high electrical conductivity. We examined the electrical conductivity of synthetic and natural graphene powders after the chemical reduction of synthetic and natural graphite oxide from synthetic and natural graphite. The trend of electrical conductivity of both graphene (synthetic and natural) was compared with different graphite materials (synthetic, natural, and expanded) and carbon nanotubes (CNTs) under compression from 0.3 to 60 MPa. We found that synthetic graphene showed a marked increment in electrical conductivity compared to natural graphene. Interestingly, the total increment in electrical conductivity was greater for denser graphite; however, an opposite behavior was observed in nanocarbon materials such as graphene and CNTs, probably due to the differing layer arrangement of nanocarbon materials.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.556-560
• /
• 2009

Aggregation behavior of three kinds of benzindocarbocyanine dyes in aqueous methanol solution was studied by UV-Vis absorption spectrum. The results indicated that the three dyes all existed monomer-dimer equilibrium in aqueous methanol solution (concentration range $10^{−5}\;to\;10^{−6}$ M) at 25.0$\sim$41.0 ${^{\circ}C}$ for Dye 1, 28.0$\sim$49.0 ${^{\circ}C}$ for Dye 2 and 26.0$\sim$47.0 ${^{\circ}C}$ for Dye 3. The fundamental property of the three dyes as the dimeric association constant KD, the dimeric free energy ${\Delta$}G_D, the dimeric entropy ${\Delta$}S_D, and the dimeric enthalpy ${\Delta$}H_D were determined. The ${\Delta$}H_D of three dyes: Dye 1, Dye 2 and Dye 3 was -42.5, -15.1 and -18.9 kJ/mol, respectively. The experimental observations were the subject of a theoretical study including the ground-state geometries which were fully optimized using DFT at B3LYP/6-31G level. The effect of dye molecule structure on ${\Delta$}H_D was discussed by theoretical calculations.

• 한국환경보건학회지
• /
• 제20권2호
• /
• pp.73-79
• /
• 1994

The effects of packing materials in the anaerobic reactor and inorganic chemicals in the synthetic wastewater on the anaerobic treatment during the start up period were investigated using anaeroic filter process. The Ringlace and Honeycomb tube as packing materials were used in the anaerobic reactors. The Ca$^{2+}$ and Fe$^{2+}$ ion concentration as inorganic chemicals contained higher 40 times and 100 times as compared to the control synthetic wastewater, respectively. A start up period 104 and 150 days were necessary to achieve loading rate of 0.37 and 0.74 kg-Toc/m$^3$.d in the anaerobic filter process packed by Ringlace and Honeycomb tube, respectively. The loading rates of the reactor using the synthetic wastewater containing Ca$^{2+}$ (40 times) could be increased faster than in the reactors using the synthetic wastewater containing Fe$^{2+}$ ion (100 times) and control synthetic wastewater. The results of XMA analysis that a lot of the Ca$^{2+}$ ion on the surface of the anaerobic sludge in the anaerobic reactor packed by Ringlace which were fed supplied with synthetic wastewater containing Ca$^{2+}$ ion (40 times) observed as compared to the reactors supplied with control synthetic wastewater and containing Fe$^{2+}$ ion (100 times).

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 동계학술연구발표회 및 2차 아시안포럼
• /
• pp.108-108
• /
• 2005

• 한국환경복원기술학회지
• /
• 제13권4호
• /
• pp.42-51
• /
• 2010

The purpose of this study is to analyze the characteristics of environment-friendliness of Root Barrier materials based on comprehensive experiments on harmfulness of Root Barrier materials and fish toxicity of Oryzias latipes mortality to verify eco-toxicity of each method of construction and Root Barrier material, which are to be applied by taking eco-toxicity into account when building ecological flows in upper areas on natural and artificial grounds. As a result, the following conclusions have been reached in this study: 1. In regard of the harmfulness analyzed, each material showed a different result of analytical value in each lab tank. Compared to lab tank, pH (la), DO (lb), T-N (VI) and T-coli (la) were in the same grade, but COD, SS, T-P and F-coli were less than that of control, respectively increased or decreased by material were analyzed. 2. In the experiment of fish toxicity, Barrier sheet was found to have 66.7% of fish mortality, indicating strong fish toxicity. Synthetic rubber system root barrier sheet (20.0%) was analyzed to have medium fish toxicity, while Synthetic resin system root barrier-waterproof sheet (3.3%), Synthetic rubber system membrane root barrier sheet (3.3%) and Synthetic resin system root barrier sheet (0.0%) showed relatively lower mortality and fish toxicity. To sum up such results as found in the experiment mentioned so far, the values of harmfulness and root penetration resistance analyzed were different in each lab tank, but there was absolutely little correlation with the mortality gained from the experiment on fish toxicity. In the experiment of fish toxicity, environment-friendly root barrier materials were analyzed, and it was found that Synthetic resin system root barrier sheet, Synthetic resin system root barrier waterproof sheet and Synthetic rubber system membrane root barrier sheet are highly environment-friendly. In contrast, Synthetic rubber system root barrier sheet was found to have medium-level environment-friendliness. Also, Barrier sheet was analyzed to have low environment-friendliness.

• 건축역사연구
• /
• 제15권1호
• /
• pp.41-60
• /
• 2006

Preservation of wooden architecture by means of synthetic resin, is physical and chemical work. Synthetic resins are using for consolidation and restoration of decayed members. Since 1978, synthetic resin became useful preservation of architectural heritage in Korea. The first object was Chimgyeru of Songgwang-temple in Suncheon city. In the 1980s, have begun the care of materials for conservation on the architectural heritage, it was influenced according to authenticity of UNESCO Venice charter's principle, in 1964. In Korea, preservation of wooden architecture by means of synthetic resin that is sing many kinds of epoxies. Among the specific types of epoxies are araldite XN1023, SV427, etc. The use of synthetic resin have merits and demerits in the restoration for architectural heritage. The merit is that it is more smaller change with new members during preservation work. But the demerit is an irreversibility of the epoxy resin. In 1999, 'ICOMOS International Wood Committee' recommend contemporary materials and techniques, should be chosen and used with the greatest caution. And preservation work should reversible, as possible as technically. Therefore, should be data continous for preservation of wooden architecture by synthetic resin. Because data is very important work about a preservation of wooden architecture by synthetic resin. And should be try to think about new materials and techniques instead of synthetic resin, in the long view.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.489-494
• /
• 2013

An improved method for the preparation of monomethine cyanine dyes with quinoline nucleus by one-pot three-component using 1-methyl-2-quinolinethione, quaternized 2- or 4-methylheterocyclic compounds and methyl p-toluenesulfonate as starting materials was described. Compared with the traditional methods, the new synthetic method reduced the reaction steps, shortened the reaction time, avoided the separation and purification of the intermediate and reduced cost. The dyes absorbed in the region 478.0-563.0 nm and had molar extinction coefficients of $1.3{\times}10^4-9.4 {\times}10^4L\;mol^{-1}\;cm^{-1}$. Their fluorescence maxima and Stokes shifts were in the range of 525.2-594.4 nm and 16.2-80.6 nm in different solvents, respectively. From the spectral properties of the dyes in different solvents, it could be found that the ${\lambda}_{max}$ of the dyes were shorter in protonic solvents, and showed hypsochromic shifts with the increase of polarity of the solvents.

• 청정기술
• /
• 제17권1호
• /
• pp.1-12
• /
• 2011

과학자와 공학자들은 끊임없이 금속, 합금, 고분자, 세라믹 등의 공학재료의 성질을 계속해서 변화하는 사회의 요구에 부응하는 방향으로 개선하여 왔다. 인조 공학재료는 일반적으로 기계적 성질이 우수하여, 자연 재료의 기계적 성질보다 우수한 경우가 많다. 그러나, 이와 같은 공학 재료는 자연계에서 흔히 볼 수 있는 자기 치유능력, 즉 고의적인 인간의 접촉을 거치지 않고도 미세균열을 제거하는 능력이 부족하다. 자연에서 관측할 수 있는 손상관리 패러다임은 여러 가지 종류의 공학재료의 고유성질을 잘 고려하면 인조공학 재료에서도 성공적으로 재현할 수 있다. 특히 적절한 화학반응과 분자간력을 응용하면 고분자, 아이오노머, 복합체와 같은 유기재료에 적용할 수 있는 다양한 자기치유 방법을 개발할 수 있다.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.196-208
• /
• 2009

감응 성질을 탑재한 복잡한 고분자 재료가 시장에 등장하기 시작하고 있다. 가역적이며 비공유성인 상호작용을 사용하여 이와 같은 감응형 재료를 설계하는 예가 많아지고 있다. 최근에 개발된 수소결합 단위가 이와 같은 설계 기법을 극으로 치닫게 하고 있다. 단량체를 이어주는 힘이 수소결합뿐인 초분자 고분자는 온도나 용매의 변화에 기계적 성질이 감응되는 재료를 형성한다. 본 보문에서는 수소결합으로 이루어진 초분자 고분자가 자기치유 재료로 사용되는 예를 소개한다. 재생 가능한 고무성 재료를 합성하는 일은 그리 매력적이라 할 수 없다. 그러나 상온에서 접착제를 사용하지 않고도 손상을 반복해서 치유할 수 있는 고무 재료는 우리의 상상의 나래를 펼치게 하는 재료이다. 외부의 간섭 없이 환경적 자극에 비선형적으로 감응하여 파손된 부분을 치유시키는 재료인 자기치유 재료는 여러 가지 첨단공학 계에서 엄청난 가능성을 가진 재료라 할 수 있다.