• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.4
• /
• pp.615-621
• /
• 2010

Purpose : The purpose of this study was to compare chronic LBP patients and asymptomatic subjects on measures of multifidus size (cross-sectional area;CSA, thickness) and symmetry (proportional difference of relatively larger side to smaller side). Methods : Data were obtained from 12 asymptomatic subjects without a prior history of LBP (8 females, 4 males), and a retrospective audit was undertaken of records from 12 chronic low back pain patients (8 females, 4 males). CSA and Thickness of the lumbar multifidus muscles was measured from axial T1-weighted magnetic resonance images(MRI). Results : The results of the analysis showed that chronic LBP patients had significantly smaller multifidus CSA and thickness than asymptomatic subjects at L4-5 vertebral levels(p<.05). The asymmetry between sides was seen at L4- L5 vertebral level in patients with chronic low back pain presentations(p<.05). Conclusions : MRI provided a quantitative measure of change between asymptomatic subjects and chronic low back pain patients of multifidus muscle. MRI identified significant differences in cross-sectional area and thickness and helps to evaluate clinically and plan the treatment modalities of LBP.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.21.1-21.3
• /
• 2019

Background: Treatment planning the correction of a transverse maxillary occlusal plane cant often involves a degree of qualitative "eyeballing", with the attendant possibility of error in the estimated judgement. A simple chair side technique permits quantification of the extent of asymmetry and thereby quantitative measurements for the correction of the occlusal plane cant. Methods: A measuring instrument may be constructed by soldering the edge of a stainless steel dental ruler at 90° to the flat surface of a similar ruler. With the patient either standing in natural head position, or alternatively seated upright in the dental chair, and a dental photographic retractor in situ, the flat under-surface of the horizontal part of this measuring instrument is placed on a unilateral segment of a bilateral structure, e.g. the higher maxillary canine orthodontic bracket hook. The vertical ruler is held next to the contralateral canine tooth, and the vertical distance measured directly from the canine bracket to the flat under-surface of the horizontal part of the measuring instrument. Results: This vertical distance quantifies the overall extent of movement required to level the maxillary occlusal plane. Conclusions: This measuring instrument and simple chair side technique helps to quantify the overall extent of surgical levelling required and may be a useful additional technique in our clinical diagnostic armamentarium.

• Transactions of Materials Processing
• /
• v.14 no.2 s.74
• /
• pp.160-167
• /
• 2005

In the present study about extru-bending of angle product, the bending of extruded angle products with the $'\Lambda'$ section and 'ㄱ', section can be obtained using two extrusion billets by the hot metal extru-bending machine with the two punches moving in the different velocity. The bending curvature can be controlled by the different velocity of billets through the two-hole container. This paper describes simulations and experiments of extru-bending process that can make bending during extruding by the difference of stem velocities. And they are applied to two kinds of dies, that is, one of them is conical dies with symmetry $'\Lambda'$ section and the other one is conical dies with asymmetry 'ㄱ' section. The results of the forming simulation by $DEFORM^{TM}-3D$ and results of experiments show that the bending phenomenon at the die exit during extrusion can be obtained with two extrusion billet by the two stems moving in the different velocity. And it was known that it is possible to design the structure of conical cavity of extrusion dies and to control the curvature of product through the simulation and experiment of extru-bending process.

• Journal of Welding and Joining
• /
• v.19 no.6
• /
• pp.622-629
• /
• 2001

The aim of this experiment is to establish the method that obtains symmetrically two nuggets in microresistance series spot welding. The sheets of austenite stainless steel STS304 applied to various electronic parts were experimented by the inverter welding power source of polarity controllable type and by the twin head for left and right electrode force to be controlled separately. The experimental results were obtained as follows : 1) When series spot welding was carried out by DC 1 pulse as welding current with same electrode force at left and right, the asymmetry of nuggets was resulted from the larger nugget of the (-) pole because of the Peltier effect. The dynamic resistance of weld spot at left and right was appeared differently according to the growth of nuggets. 2) When AC 1 cycle by welding power source of polarity controllable type was applied, the nuggets were almost symmetrically formed. 3) In a twin head, if the electrode force of (-) pole was larger than that of (+) pole, the diameters of two nuggets became to same. It was confirmed that the dynamic resistance of (-) pole was decreased to the same level as it of (+) pole. 4) Although the forces of left and right electrode were same, and only DC 1 pulse was applied, symmetric nuggets were obtained if the conductivity of (+) pole was lower than it of (-) pole.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1422-1423
• /
• 2006

In our study, the PTFE nozzle ablation in the high-voltage self-blast type $SF_6$ gas circuit breaker was investigated. The test circuit breaker has the structure that the pin electrode is moving and the pressure reservoir volume and the dimension is almost same as commercial 145kv 40kA circuit breaker for similar result in real circuit breaker. The variation of current and arcing time was the range of $36kA_{rms}$(symmetry) - $40kA_{rms}$(asymmetry) and 10-16 ms. From the measured data the tendecy of the mass loss of the nozzle to current load and arc energy was estimated. In this process, the distance from the arc to nozzle(PTFE) surface, area which was exposed to arc and stroke contour was considered. These results will be used to enhance the accuracy of the computational fluid dynamics analysis in circuit breaker and estimate the residual life time of a circuit breaker.

• Archives of Pharmacal Research
• /
• v.6 no.2
• /
• pp.115-121
• /
• 1983

Cholesteryl p-[3-(2-chloroethyl_-3-nitrosoureido] phenylthioaccetate (2) was synthesized : an intermediate, p-[3(2-chloroethyl_-3-nitrosoureido] phenylthioacetic acid (1) is a congener of an antitumor chlorambucil which both the -CH$_{2}$CH$_{2}$-linkage and -N(CH$_{2}$CH$_{2}$Cl)$_{2}$ group of chlorambucil molecule is doubly modified into the respective -S-linkage and -NH-CO-NNO-CH$_{2}$CH$_{2}$CL group. The attackment of cholesterol moiety as a carrier group to p-[3-(2-chloroethyl-3nitrosoureido] phenylthioacetic acid was accomplished through the esterification of cholesterol with p-[3-(2-chloroethyl-3-nitrosoureido] phenylthioacetyl chloride which was obtained from the treatment of p-[3-(2-chloroethyl)-3-nitrosourei-do] phenylthioaceticacid with SOCL$_{2}$, p-[3-(2-chloroethyl)ureido]]-phenythioacetic acid was nitrosated with NaNO$_{2}$ IN 98-100% HCOOH to give exclusively p-[3-(2-chloroethyl_-3-nitrosoureido] phenylthioacetic acid. Antitumor evaluation of compounds, 1 and 2 on L 1210 leukemia did show significant activity (ED$_{40}$ : 1.14.mu./ml and 8.4.mu.g/ml, repectively). Further studies were subjected..

• Environmental and Resource Economics Review
• /
• v.27 no.2
• /
• pp.363-397
• /
• 2018

We study the impact of loss-aversion and the threat of critical damages from insufficient pollutant abatement, which we jointly call threshold concerns, on the outcome of international environmental agreements. We aim to understand whether concerns for a critical level of damages induce cooperation among countries faced with the well-known free-riding problem, and yield sufficient emission reductions to avoid exceeding the threshold. Specifically, we focus on loss-averse countries negotiating under the threat of either high or low environmental damages. Under symmetry, when countries display identical degrees of threshold concern, we show that such beliefs have a positive effect on reducing the emission levels of both signatories to the treaty and non-signatories, leading to weakly larger coalitions of signatories than in the absence of reference dependence. We then introduce asymmetry, by allowing countries to differ in the degree of concern about the damages. We show that stable coalitions are mostly formed by the countries with higher threshold concerns. When enough countries exhibit standard preferences, the coalition size may diminish, regardless of the degree of concern by the others.

• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.48-54
• /
• 2016

The prediction of various emissions from coal combustion is an important subject of researchers and engineers because of environmental consideration. Therefore, the development of the models for predicting pollutants very fast has received much attention from international research community, especially in the field of safety assessment. In this work, response surface method was introduced as a design of experiment, and the database for RSM was set with the numerical simulation of a drop tube furnace (DTF) to predict the spatial distribution of pollutant concentrations as well as final ones. The distribution of carbon dioxide in DTF was assumed to have Boltzman function, and the resulted function with parameters of a high $R^2$ value facilitates predicting an accurate distribution of $CO_2$. However, CO distribution had a difference near peak concentration when Gaussian function was introduced to simulate the CO distribution. It might be mainly due to the anti-symmetry of the CO concentration in DTF, and hence Extreme function was used to permit the asymmetry. The application of Extreme function enhanced the regression accuracy of parameters and the prediction was in a fairly good agreement with the new experiments. These results promise the wide use of statistical models for the quantitative safety assessment.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.1
• /
• pp.19-24
• /
• 2008

We present the full BVR light curves and five times of minima of WZ Cep to provides a complete photometric solution and to confirm the long term variation of the light curves. Our light curves show symmetry while previous light curves of Hoffmann (1984) show a high degree of asymmetry (the O'Connell effect). The BVR light curves were analyzed by the method of Wilson-Devinney Differential Correction. Our photometric results show a good agreement with those of Djurasevic et al. (1998).

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.3
• /
• pp.126-132
• /
• 2002

The origin of image-sticking in metal-insulator-metal type thin-film diode liquid crystal displays(TFD-LCDs) is the asymmetric current-voltage(I-V) characteristic of TFD element. We developed that TFD-LCDs have reduced-image-sticking. Tantalum pentoxide(Ta$_2$O$\sub$5/) is a candidate for use in metal-insulator-metal(MIM) capacitors in switching devices for active-matrix liquid crystal displays(AM-LCDs). High quality Ta$_2$O$\sub$5/ thin films have been obtained from anodizing method. We fabricated a TFD element using Ta$_2$O$\sub$5/ films which had perfect current-voltage symmetry characteristics. We applied novel process technologies which were postannealed whole TFD element instead of conventional annealing to the fabrication. One-Time Post-Annealing(OPTA) heat treatment process was introduced to reduce the asymmetry and shift of the I-V characteristics, respectively. OPTA means that the whole layers of lower metal, insulator, and upper metal are annealed at one time. Futhermore, in this paper, we discussed the effects of top-electrode metals and annealing conditions.