• 제목/요약/키워드: symbol system

검색결과 968건 처리시간 0.025초

채널 추정 알고리즘을 이용한 비동기식 IMT-2000 (W-CDMA) 시스템의 성능 분석 (Analysis of Asynchronous IMT-2000 (W-CDMA) Systems Using Channel Estimation Algorithm)

  • 김병기;나인학;전준수;김철성
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
    • /
    • pp.77-80
    • /
    • 2002
  • In this paper, we analyze a physical layer of W-CDMA .system and design a transmitter and receiver by using ADS (Advanced Design System). Also, we simulated a link level performance with different channel estimation algorithm in Jakes fading channel environment. For the channel estimator, we used the WMSA(Weighted Multi-Slot Averaging) algorithm, EGE(Equal Gain Estimation) algorithm and SSE(Symbol-to-Symbol Estimation) algorithm. This study will be useful in the analysis and design of W-CDMA system.

  • PDF

무선랜 시스템에서의 IQ 부정합 보상 기법 연구 (IQ Unbalance Compensation for OPDM Based Wireless LANs)

  • 김지호;정윤호;김재석
    • 한국통신학회논문지
    • /
    • 제32권9C호
    • /
    • pp.905-912
    • /
    • 2007
  • 본 논문에서는 OFDM 기반 무선 LAN 시스템에서 긴 훈련심볼을 이용하는, 시간동기 오차의 영향이 고려된 IQ imbalance 추정 및 보상 기법을 제안한다. 기존의 긴 훈련심볼을 이용한 IQ imbalance 보상 기법은 시간동기 오차에 민감한 구조를 갖기 때문에 시간동기 오차가 필연적인 실제 시스템에서는 심각한 성능 저하를 보인다. 본 논문에서는 시간동기 오차로 인해 발생하는 위상회전을 상쇄시킬 수 있는 새로운 criterion을 정의하고, 이에 따른 IQ imbalance 추정 및 보상 기법을 제안한다. 제안된 기법은 시간동기 오차가 존재할 경우에도 IQ imbalance 의 영향을 이상적인 경우 대비 최대 0.2dB 이하로 보상할 수 있으며, IEEE 802.11a 시스템의 54Mbps 전송모드에 적용하였을 경우 기존 기법에 비해 약 4.3dB의 성능 이득을 보인다. 제안된 기법을 이용한 IQ imbalance 추정 및 보상단은 Verilog HDL을 이용하여 하드웨어 설계 및 검증 되었으며, 0.18um CMOS 공정을 이용하여 합성한 결과, 약 75K gates 와 6K bits의 메모리로 구현되었다.

Application of Correlation-Aided DSA(CDSA) Technique to Fast Cell Search in IMT-2000 W-CDMA Systems.

  • Kim, Byoung-Hoon;Jeong, Byeong-Kook;Lee, Byeong-Gi
    • Journal of Communications and Networks
    • /
    • 제2권1호
    • /
    • pp.58-68
    • /
    • 2000
  • In this paper we introduce the correlation-aided distributed sample acquisition (CDSA) scheme for fast cell search in IMT-2000 W-CDMA cellular system. The proposed scheme incorporates the state symbol correlation process into the comparison-correction based synchronization process of the original DSA scheme to enable fast acquisition even under very poor channel environment. for its realization, each mobile station (MS) has to store in its memory a set of state sample sequences. which are determined by the long-period scrambling sequences used in the system and the sampling interval of the state samples. CDSA based cell search is carried out in two stages : First, the MS first acquires the slot timing by using the primary synch code (PSC) and then identifies the igniter code which conveys the state samples of the current cell . Secondly. the MS identifies the scrambling code and frame timing by taking the comparison-correction based synchronization approach and, if the identification is not done satisfactorily within preset time. it initiates the state symbol correlation process which correlates the received symbol sequence with the pre-stored state sample sequences for a successful identification. As the state symbol SNR is relatively high. the state symbol correlation process enables reliable synchronization even in very low chip-SNR environment. Simulation results show that the proposed CDSA scheme outperforms the 3GPP 3-step approach, requiring the signal power of about 7 dB less for achieving the same acquisition time performance in low-SNR environments. Furthermore, it turns out very robust in the typical synchronization environment where large frequency offset exists.

  • PDF

위성통신시스템에서 심볼율 추정과 변조 방식 구분법 (Symbol Rate Estimation and Modulation Identification in Satellite Communication System)

  • 최찬호;임종부;임기홍;김영환;김호겸
    • 한국통신학회논문지
    • /
    • 제30권8A호
    • /
    • pp.671-678
    • /
    • 2005
  • 본 논문은 위성 통신 시스템에서 심볼율에 대한 사전 지식 없이 다양한 심볼율에 대한 심볼율 추정 방법과BPSK, QPSK, 8PSK 신호를 구분하기 위한 간단화된 변조 방식 구분법을 제안했다. 심볼율을 추정하기 위해 신호의 스펙트럼을 추정하기 위한 슬라이딩 FFT와 단순 moving average를 사용하였고, 슬라이딩 윈도우와 decimation, Low pass filter (LPF) 블록을 이용하여 정확한 심볼율을 추정하였다. 기존의 변조 방식 구분법은 test statistics로써 SNR값을 사용하지만 수신기는 통신 시작시에 변조 방식을 알지 못하기 때문에 SNR 값을 추정할 수 없는 문제와 log, cosh과 같은 비선형 함수를 사용하는 기존의 변조 방식 구분법이 비트 resolution이 높은 문제가 있기 때문에 기존의 변조 방식 구분법에 간단화된 고정된 SNR 방법을 제안하였다. 심볼율 추정과 변조 방식 구분법의 성능은 Monte Carlo 컴퓨터 시뮬레이션을 통해 보여주었고, 심볼율 추정이 낮은 SNR에서도 좋은 성능을 나타내는 것을 볼 수 있었고, 변조 방식 구분법을 간단화 하였지만 기존의 방법과 비교해서 비슷한 성능을 나타내는 것을 확인 할 수 있었다.

주파수 비선택적 레일리 페이딩 채널에서의 타이밍 복구회로를 고려한 PSA-TC-8PSK의 성능 분석 (Performance Analysis of Pilot Symbol Assisted Trellis-Coded 8PSK with Timing Recovery Circuits on the Frequency-Nonselective Rayleigh Fading Channel)

  • 이병로
    • 한국정보통신학회논문지
    • /
    • 제5권3호
    • /
    • pp.419-425
    • /
    • 2001
  • 이동통신에서 다중경로에 의한 페이딩 현상은 시스템의 성능에 영향을 주는 큰 원인 중의 하나이다. 이런 페이딩 채널에서의 성능저하를 개선하기 위하여 많은 연구가 진행되고 있다. 채널 페이딩을 추정하여 보상하는 방식에서는 파일럿 심벌을 이용하는 PSAM(pilot symbol assisted modulation) 방식이 널리 이용되고 있으며 TCM(trellis-coded modulation)은 전송 대역폭의 증가 없이 철저한 부호화 이득을 얻을 수 있는 부호화와 변조 과정이 결합된 전송 기술이다. 본 논문에서는 주파수 비선택적 레일리 페이딩 채널에서 PSAM과 TCM을 사용하는 PSA-TC-8PSK의 성능을 분석하였다. 페이딩의 추정을 위한 보간 방법에는 오차의 분산을 최소화하는 Wiener 필터를 사용하였으며 필터의 탭수, 파일럿 심벌 주기, 도플러 주파수가 성능에 미치는 영향을 분석하였다. 또한 완전 디지털 방식의 구현이 가능한 심벌 타이밍 복구 회로를 구성하여 심벌 타이밍 에러가 전체 성능에 미치는 영향을 분석하였다.

  • PDF

IEEE 802.11 기반 시스템에서 채널추정에 관한 연구 (A study on the Channel Estimation Scheme in IEEE 802.11 Based System)

  • 김한종
    • 디지털융복합연구
    • /
    • 제12권3호
    • /
    • pp.249-254
    • /
    • 2014
  • 무선 랜 시스템은 고속의 데이터를 전송하기 위하여 끊임없이 진화 중이며 통신성능을 향상시키기 위해서는 더욱 정밀한 채널추정이 필수적으로 요구된다. 본 논문에서는 IEEE 802.11 기반 무선 모뎀의 PLCP 구조에서 기존의 긴 훈련심볼만을 이용하여 채널을 추정하는 LS 알고리즘의 성능을 개선하고자 하였다. 48개의 부반송파 중에서 12개의 위치에 짧은 훈련 심볼을 전송하고 있다는 사실을 이용하여 2개의 긴 훈련심볼 뿐만 아니라 하나의 짧은심볼도 함께 사용하여 채널을 추정하는 새로운 LS 추정 알고리즘을 제안하였다. 두 개의 긴 훈련심볼 뿐만 아니라 짧은 훈련 심볼을 이용함으로써 보다 향상된 채널 추정을 제공할 수 있음을 보였으며 제안된 채널 추정알고리즘은 IEEE 802.11p WAVE 차량통신 시스템에도 적용이 가능하리라 생각된다. 또한 학부 및 대학원의 OFDM 관련 채널 추정 교육 시 본 논문의 내용이 유용하게 사용될 수 있을 것이다.

DMT 방식을 이용한 VDSL시스템의 동기 (Synchronization for VDSL system using DMT)

  • 최병익;우정수;임기홍
    • 한국통신학회논문지
    • /
    • 제27권10C호
    • /
    • pp.951-962
    • /
    • 2002
  • DMT 방식의 송·수신기는 파일롯 채널의 페이즈 정보를 이용하여 샘플동기를 맞추게 된다. 파일롯 채널의 페이즈 값은 심볼 단위로 행해지는 FFT 결과에서 구할 수 있으므로, 심볼동기를 샘플동기 이전에 맞추어 주어야 한다. DMT VDSL시스템의 경우, 심볼 내의 반복되는 구간사이의 상관성을 통해서 심볼동기를 구할 수 있게 된다. 수신신호의 부호를 기본으로한 최우도 추정함수를 사용하여 심볼동기를 구하는 기법에 대해 제안하였으며, Tx 윈도우에 의해, 심볼동기의 추정값이 잡음에 민감해지는 것을 막기위해 가중합을 적용한 추정 방법을 제안하였다. 송·수신기 사이에 샘플링 클럭 옵셋이 존재할 경우, 샘플동기를 위해 디지털 영역에서 샘플링 클럭 옵셋을 보정해주는 기법을 제안하였다.

Wideband Time-Frequency Symbols and their Applications

  • Iem, Byeong-Gwan
    • 한국지능시스템학회논문지
    • /
    • 제11권6호
    • /
    • pp.563-567
    • /
    • 2001
  • We generalize the widebane P0-weyl symbol (P0WS) and the widebane spreading function (WSF) using the generalized warping function . The new generalized P0WS and WSF are useful for analyzing system and communication channels producing generalized time shifts. We also investigated the relationship between the affine Wey1 symbol(AWS) and the P0WS. By using specific warping functions, we derive new P0WS and WSF as analysis tools for systems and communication channels with non-linear group delary characteristics. The new P0WS preserves specific types of changes imposed on random processes. The new WSF provides a new interpretation of output of system and communication channel as weighted superpositions of non-linear time shifts on the input. It is compared to the conventional method obtaining output of system and communication channel as a convention integration of the input with the impulse response of the system and the communication channel. The convolution integration can be interpreted as weighted superpositions of liner time shifts on the input where the weight is the impulse response of the system and the communication channel. Application examples in analysis and detection demonstrate the advantages of our new results.

  • PDF

다중밴드를 사용하는 MIMO-OFDM에 적합한 연산효율적 훈련심볼의 설계 (Computationally-Efficient Design of Training Symbol for Multi-Band MIMO-OFDM System)

  • 김병찬;전태현;정민호
    • 한국통신학회논문지
    • /
    • 제33권5A호
    • /
    • pp.479-486
    • /
    • 2008
  • 본 논문은 MIMO-OFDM 시스템을 기반으로 한 Gbps급 차세대 무선전송 시스템에서 m-sequence를 이용하여 효율적으로 훈련심볼을 설계하는 방법을 제안한다. 계산량을 고려하지 않는 일반적인 훈련심볼 설계방법에는 랜덤한 시퀀스에 대하여 시스템 요구사항을 하나하나 비교해가며 모든 사항이 만족되었을 때 훈련심볼로 채택하는 기법이 존재한다. 본 논문에서는 상관관계 특성이 우수하여 대역확산 통신 방식 등에서 사용하는 m-sequence를 기반으로 제한된 탐색공간 내에서 효율적인 MIMO-OFDM 시스템을 위한 훈련심볼의 단계별 설계 및 검증방법을 논의한다. 제안된 방법은 패킷 기반 MIMO-OFDM 무선통신 시스템에서 자동이득제어, 타이밍 동기, 주파수 및 시간옵셋 추정, MIMO 채널추정 등을 포함한 시스템에서 요구하는 조건을 만족시키는 훈련심볼 설계를 목표로 한다.

전자회로 도면관리를 위한 벡터화와 회로 기호의 인식 (The vectorization and recognition of circuit symbols for electronic circuit drawing management)

  • 백영묵;석종원;진성일;황찬식
    • 전자공학회논문지B
    • /
    • 제33B권3호
    • /
    • pp.176-185
    • /
    • 1996
  • Transformin the huge size of drawings into a suitable format for CAD system and recognizng the contents of drawings are the major concerans in the automated analysis of engineering drawings. This paper proposes some methods for text/graphics separation, symbol extraction, vectorization and symbol recognition with the object of applying them to electronic cirucit drawings. We use MBR (Minimum bounding rectangle) and size of isolated region on the drawings for separating text and graphic regions. Characteristics parameters such as the number of pixels, the length of circular constant and the degree of round shape are used for extracting loop symbols and geometric structures for non-loop symbols. To recognize symbols, nearest netighbor between FD (foruier descriptor) of extractd symbols and these of classification reference symbols is used. Experimental results show that the proposed method can generate compact vector representation of extracted symbols and perform the scale change and rotation of extracted symbol using symbol vectorization. Also we achieve an efficient searching of circuit drawings.

  • PDF