본 논문에서 방전 또는 스파크로 인한 전기화재, 폭발사고 및 감전 사고의 위험 없이 고주파 고전력을 안전하게 전달할 수 있는 새로운 형태의 실용적인 자기케이블을 처음으로 제안하였다. 또한, 케이블 사이에서 발생하는 누설자속에 대한 자기저항을 주변효과(fringe effect)까지 고려하여 정량적으로 해석하였다. 자기케이블에 상쇄코일, 상쇄금속판, 상쇄금속관과 같은 상쇄실드 적용함으로써 자기케이블 사이의 누설자속을 급격히 줄여 콤팩트한 자기케이블을 구현하였고, 장거리 전력전송을 가능하게 하였다. 입력전류 $10A_{rms}$(20kHz)에서 상쇄금속관이 적용된 1.5m길이, 5cm의 케이블 사이의 간격을 갖는 자기케이블로 353.8W의 전력을 68%효율로 전달하였다. 이는 상쇄금속관을 적용하지 않았을 때에 비해 출력전력은 약 25배, 효율은 약 7배 높은 수치다. 본 논문에서는 제안된 자기케이블의 성능 특성을 실험과 자장 시뮬레이션을 통해 분석 및 검증하고 비교하였으며, 기대했던 우수한 성능을 실제로 확인하였다.
본 논문에서는 5.25 GHz에서 넓은 이득 제어범위를 갖는 저전력 가변 이득 프론트-엔드를 설계하였다. 넓은 이득 제어범위를 갖기 위해, 제안된 저잡음 증폭에서는 가변이득 증폭기의 소스에 p-타입 트랜지스터를 연결하였다. 이 방법을 통해 증폭기의 바이어스 전류와 소스 임피던스를 동시에 조절할 수 있었다. 따라서 제안된 저잡음 증폭기는 넓은 이득 제어범위를 갖는다. 믹서에서는 입력 트랜스컨덕턴스단으로 p-타입 트랜지스터를 사용한 폴디드 구조가 제안되었다. 이 구조에서 믹서는 작은 공급 전압에서 각 단에 필요한 만큼의 전류만 흘려주기 때문에 저전력에서도 작동을 할 수 있다. 제안된 프론트-엔드는 최대 33.2 dB의 이득과 17 dB의 넓은 이득 제어범위를 갖는다. 이 때, 잡음지수와 IIP3는 각각 4.8 dB, -8.5 dBm을 갖는다. 이러한 동작을 하는 동안, 제안된 회로는 최대 이득상태에서 7.1 mW, 최소 이득상태에서 2.6 mW의 적은 전력을 소비한다. 시뮬레이션 결과는 TSMC $0.18\;{\mu}m$ CMOS 공정에서 Cadence를 이용하여 얻어졌다.
다기능성 아크릴레이트 단량체와 네마틱 액정 등을 혼합한 홀로그래픽 고분자 분산 액정 박막을 제작하고 액정의 농도와 피부에서 인가한 교류 전기장 등에 대한 실시간 회절효율을 측정하였다. WPDLC 박막에 기록된 홀로그램은 적절한 교류 전기장의 on/off에 의해 가역적으로 소거와 재생이 가능함을 보였다. 이러한 전기광학 특성을 이용하여 30 cm와 40 cm의 이중초점을 갖는 홀로그램 렌즈를 제작하였다.
최근 들어 광, 온도, pH, 전기, 자성, 압력 등과 같은 외부 환경의 작은 변화에도 반응하여 모양/부피가 변하거나 기계적, 광학적, 전기적, 화학적 특성 등이 가역적으로 바뀌는 스마트 소재에 대한 관심이 높아지고 있다. 이러한 스마트 소재들 중 광조사에 의해 소재의 다양한 특성을 가역적으로 제어할 수 있는 광응답 스마트 소재가 많은 관심을 받고 있다. 본 논문에서는 광에너지를 받아 기계적 에너지로 바로 전환되어 인공근육, 모터 등과 같은 액츄에이터 기능을 할 수 있는 광구동형 스마트 고분자 소재들에 대해 소개하고자 한다. 특히, 광구동형 스마트 고분자 소재 중에서도 마이크로와 매크로 스케일 변형이 가능한 아조벤젠을 함유한 비결정성 고분자, 액정 고분자, 자기 조립형 초분자에 대한 다양한 연구들에 대해 설명하고자 한다.
IPv6(IP version 6)는 QoS(Quality of Service) 제공을 위해 플로우 레이블이라는 새로운 필드를 정의하고 있다. 기존 플로우 레이블 부여 방안인 랜덤 넘버(Random Number) 방식은 플로우에 대한 식별자 기능만을 수행함으로써 다양한 실시간 트래픽 특성에 따른 차별화된 서비스 제공에는 제약이 따른다. 본 논문에서는 플로우 레이블 필드를 플로우의 구성요소 및 QoS 파라미터로 사용하는 하이브리드(Hybrid) 방안을 제시하였다. 즉, 플로우 레이블에 사용되는 파라미터를 사용자가 표시하게 함으로써 실시간 트래픽에 대한 종단간 품질 보장과 함께 백본의 전송 자원을 효율적으로 사용할 수 있는 방법을 제시한다. 본 논문에서는 백본을 MPLS-TE(Multi Protocol Label Switching - Traffic Engineering) 환경으로 가정하고 시뮬레이션을 통해 랜덤 넘버 방식과 제안된 하이브리드 방식에 대한 성능을 평가하였다. 그 결과 하이브리드 방식이 랜덤 넘버 방식에 비해 처리 성능 및 백본 자원의 활용 측면에서 효율적인 것을 알 수 있었다.
본 논문은 직접토크제어에 의한 리럭턴스 동기 전동기의 위치센서 없는 고성능 제어시스템을 제안한다. 이 시스템은 고정자 자속관측기, 속도/토크 관측기, 두 개의 디지털 히스테리시스 제어기, 최적 스위칭 룩업 테이블, IGBT 전압형 인버터, 그리고 TMS320C31 DSP보드로 구성된다. 넓은 속도 범위에서의 안정된 응답특성을 얻기 위해서 전동기 단자에서 얻어진 전압과 전류를 사용하는 폐루프 자속관측기를 사용하였다. 개발된 고성능 속도제어 시스템의 동특성을 검증하기 위해서 1.0[kW] 리럭턴스 동기 전동기를 사용하여 시뮬레이션과 실험을 수행한 결과 저속영역과 고속영역 모두 우수한 동특성을 얻을 수 있었다.
비정질 인듐-갈륨-아연 산화물 박막트랜지스터를 모델링 하여서, 능동층의 구조, 두께, 평형상태의 전자밀도에 대응하는 박막트랜지스터의 특성을 연구하였다. 단일 능동층 박막트랜지스터의 경우, 능동층이 얇을 때 높은 전계효과이동도를 보였다. 문턱전압의 절대값은 능동층의 두께가 20 nm일 때 최저치를 보였으며, 문턱전압이하 기울기는 두께에 대한 의존성을 보이지 않았다. 복층구조 능동층의 경우, 하부의 능동층이 높은 평형상태 전자밀도를 가질 때보다 우수한 스위칭 특성을 보였다. 이 경우에도 능동층의 두께가 얇을 때에 높은 전계효과 이동도를 보였다. 높은 평형상태 전자밀도의 능동층의 두께를 증가시키면 문턱전압은 음의 방향으로 이동하였다. 문턱전압이하 기울기는 능동층의 구조에 대하여 특별한 의존성을 보이지 않았다. 이상과 같은 데이터는 산화물반도체 박막트랜지스터 능동층의 구조, 두께, 도핑비율을 최적화함에 효과적으로 사용될 것으로 기대된다.
In our previous reports [1-3], electron transport for the switching and memory devices using alkyl thiol-tethered Ru-terpyridine complex compounds with metal-insulator-metal crossbar structure has been presented. On the other hand, among organic memory devices, a memory based on the OFET is attractive because of its nondestructive readout and single transistor applications. Several attempts at nonvolatile organic memories involve electrets, which are chargeable dielectrics. However, these devices still do not sufficiently satisfy the criteria demanded in order to compete with other types of memory devices, and the electrets are generally limited to polymer materials. Until now, there is no report on nonvolatile organic electrets using nano-interfaced organic monomer layer as a dielectric material even though the use of organic monomer materials become important for the development of molecularly interfaced memory and logic elements. Furthermore, to increase a retention time for the nonvolatile organic memory device as well as to understand an intrinsic memory property, a molecular design of the organic materials is also getting important issue. In this presentation, we report on the OFET memory device built on a silicon wafer and based on films of pentacene and a SiO2 gate insulator that are separated by organic molecules which act as a gate dielectric. We proposed push-pull organic molecules (PPOM) containing triarylamine asan electron donating group (EDG), thiophene as a spacer, and malononitrile as an electron withdrawing group (EWG). The PPOM were designed to control charge transport by differences of the dihedral angles induced by a steric hindrance effect of side chainswithin the molecules. Therefore, we expect that these PPOM with potential energy barrier can save the charges which are transported to the nano-interface between the semiconductor and organic molecules used as the dielectrics. Finally, we also expect that the charges can be contributed to the memory capacity of the memory OFET device.[4]
The SBT$(Sr_{0.8}Bi_{2.4}Ta_2O_9)$ thin films for semiconductor device were deposited on Pt-coated $Pt/TiO_2/SiO_2Si$ wafer by RF magnetron sputtering method at $400[^{\circ}C]$ and annealed at the temperature range from $600[^{\circ}C]$ to $850[^{\circ}C]$. The top electrodes(Pt) were deposited on SBT thin film by DC sputtering method. The crystallinity of SBT thin films were increased with increase of annealing temperature in the temperature range of $600[{\circ}C]\sim850[^{\circ}C]$. The annealing temperature properties were to be most excellent in the case of annealed SBT thin film at $750^{\circ}C]$. And, the maximum remanent polarization$(2P_r)$ and the coercive electric field$(E_c)$ at annealing temperature of $750[^{\circ}C]$ obtained about $11.60[{\mu}C/cm^2]$ and 48[kV/cm], respectively. Specially, it was seen that fatigue properties does not change in $10^{10}$ switching cycle.
Present electric grids are advanced to integrate smart grids, distributed resources, high-speed sensing and control, and other advanced metering technologies. Cybersecurity is one of the challenges of the smart grid and nuclear plant digital system. It affects the advanced metering infrastructure (AMI), for grid data communication and controls the information in real-time. The research article is emphasized solving the nuclear and smart grid hardware security issues with the integration of field programmable gate array (FPGA), and implementing the latest Time Authenticated Cryptographic Identity Transmission (TACIT) cryptographic algorithm in the chip. The cryptographic-based encryption and decryption approach can be used for a smart grid distribution system embedding with FPGA hardware. The chip design is carried in Xilinx ISE 14.7 and synthesized on Virtex-5 FPGA hardware. The state of the art of work is that the algorithm is implemented on FPGA hardware that provides the scalable design with different key sizes, and its integration enhances the grid hardware security and switching. It has been reported by similar state-of-the-art approaches, that the algorithm was limited in software, not implemented in a hardware chip. The main finding of the research work is that the design predicts the utilization of hardware parameters such as slices, LUTs, flip-flops, memory, input/output blocks, and timing information for Virtex-5 FPGA synthesis before the chip fabrication. The information is extracted for 8-bit to 128-bit key and grid data with initial parameters. TACIT security chip supports 400 MHz frequency for 128-bit key. The research work is an effort to provide the solution for the industries working towards embedded hardware security for the smart grid, power plants, and nuclear applications.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.