• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권3호
• /
• pp.397-403
• /
• 2012

This paper describes a control method of turn-on/off angles to improve the efficiency of the switched reluctance generator(SRG) with a power closed-loop control system, and the inner-loop of the system is current hysteresis control. The SRG control system is constituted by the PI power controller and the two-level current hysteresis controller. By measuring and analyzing the system losses of different reference powers, speeds and turn-on/off angles, selection strategy of optimal turn-on/off angles is discussed. The proposed method is simple, reliable, and easy to achieve.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.13-15
• /
• 2004

In this paper, we propose a novel stability criterion and a guideline of controller design for switched linear systems. Unlike existing criterions such as Lie algebraic method and multiple Lyapunov functions method, the proposed criterion can be applied to each individual system without considering an overall system. By applying the proposed criterion to each individual system separately, a state feedback controller can be easily designed. Stability of the overall system is proved by developing a rule to determine non-increasing Lyapunov functions recursively at each switching instant. An illustrative example is given.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1337-1350
• /
• 2019

This paper proposes a Phase-Shift Triple Full-Bridge (PSTB) Zero-Voltage Zero-Current-Switching (ZVZCS) converter with a high switching frequency and high efficiency. In the proposed converter, all three bridge legs are shared leading-legs, and all three transformers work in the Discontinuous Conduction Mode (DCM). Thus, all of the switches and diodes in the PSTB ZVZCS can be soft switched. Moreover, since all of the transformers can pass energy from the primary-side to the secondary-side when their primary-side currents are not zero, there is no circulating current. As a result, the PSTB ZVZCS converter can achieve a high efficiency at high operating frequencies. A theoretical analysis and the characteristics of the proposed converter are presented and verified on a 1MHz 200~300V/24V 1.2kW hardware prototype. The proposed converter can reach a peak efficiency of 96.6%.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.955-957
• /
• 1998

Switched reluctance motor(SRM) has the advantages of simple structure, low rotor inertia, and high poer rate per unit volume. However, position sensor isessential in SRM in order to synchronize the phase excitation to the rotor position. The position sensors increase the cost of drive system, and tend to reduce system reliability. This paper investigtes the speed control of sensorless SRM. The proposed system consists of position detection circuit, dwell angle controller, digital logic commutator, PI speed controller and 4-phase inverter. The performances in the proposed system are verified through the experiment.

• 대한전자공학회논문지TC
• /
• 제38권6호
• /
• pp.28-38
• /
• 2001

본 논문은 망에 대한 유연성과 망의 성능의 효율성을 개선하기 위하여 회선 교환 위성 망에서 데이터 트래픽을 동적으로 다루는 시스템을 제안하고 제안한 시스템에 대한 성능을 분석한다. 제안한 시스템은 각 연결대한 용량 변경 요구를 동적으로 허락하기 때문에 그 연결 자체의 초기화 설정 및 연결을 해제하는 다른 별도의 알고리즘이 필요 없이 기존의 회선 교환 위성 망보다 효율적이다. 또한, 서비스 질을 결정적으로 보장함으로 망의 유연성 및 신뢰성을 높인다. 트래픽 소스는 표준 듀얼 리키 버켓에 의해 일정하게 조정된 트래픽을 사용하며, 이러한 트래픽을 이용하여 제안한 시스템의 성능을 해석적으로 분석하고, 이를 시뮬레이션을 통해 검증한다. 이러한 분석 결과는 앞으로 회선 교환 위성 망에서 프로토콜의 설계 및 구현 시 유용하게 사용될 수 있을 것으로 사료된다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권11호
• /
• pp.511-518
• /
• 2005

This paper presents the design and drive characteristics of a switched reluctance motor for an electric power pallet vehicle. The designed switched reluctance motor is redesigned by using the finite element analysis(FEA) as a variation of the pole-arc angle for the purpose of an electric power pallet vehicle performance. The output power and torque characteristics of a switched reluctance motor are variable by switching angles of the commutator. Therefor this paper is studied about relationship between the output power and torque characteristics of a switched reluctance motor according to switching angles. The output power of the characteristic point of an electric power pallet vehicle has been shown by experiment. The designed motor drive system operates with the low voltage and high current with using the battery. The core and frame temperatures were described. In this paper, the designed motor is shown better drive characteristics than the DC motor from the rated to maximum, which is verified by the finite element analysis and experimental results.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.264-268
• /
• 2007

This article presents the performance evaluation case study of circuit-switched WCDMA R5MSC(Mobile Switching Center) Server and CS-MGW(Circuit Switched Media Gateway) in 3'rd generation mobile telecommunication (UMTS : Universal Mobile Telecommunication System). The presented work adopted circuit switching scenarios recommended by 3GPP(Third Generation Partnership Project) and terrestrial spectrum calculation parameters and its values defined in ITU-R M.2023 and M.1390 to do the case study on performance evaluation of circuit switched system (R5 MSC Server and CS-MGW) in WCDMA core network. This paper describes test results by using simulator which substitutes for wireless section (MS, Node-B, RNC).

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1297-1302
• /
• 2017

Recently, SRMs are used in automobiles for power assistant steering, accessory motion control and traction drives. Especially in the motion control and traction drives, safety and efficiency are of paramount importance. The paper describes the essential elements faced in designing and constructing driving circuits for a switched reluctance motor for automobiles. An important factor in the selection of a motor and a drive for industrial application is the cost. The switched reluctance motor(SRM) is a simple, low-cost, and robust motor suitable for variable-speed as well as servo-type applications. With relatively simple converter and control requirements, the SRM is gaining an increasing attention in the drive industry. This paper presents a modified C-dump converter for Switched Reluctance Motor (SRM) machine application in the cooling system of automobiles. The experiments are performed to verify the capability of applicate control method on 6/4 salient type SRM.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.35-38
• /
• 2003

We propose a switched beamforming to improve the reception performance of VSB system in severe Rayleigh fading channel. The VSB system has only about 3% of known training signal for the receiver in a data field and the reception performance of VSB receiver is degraded significantly when there are near-0 dB ghosts in receiving signal. The switched beamforming forms several beams in different directions and selects only one beam among them. For the selection of a beam with best channel condition for VSB equalizer, we extracted the channel profiles in time domain for all the beams by correlating the PN511 sequence in VSB field sync and selected optimal beam by comparing the channel profiles. The simulation results show that the proposed method improves the reception performance of VSB system in severe Rayleigh channel.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1866-1872
• /
• 2017

This paper presents the design of in-wheel type Switched Reluctance Motor (SRM) which can be used as both traction motor and power pickup device in a wireless charging system of electric vehicles. The SRM acts as a traction drive in driving mode and a power receiver in charging mode to avoid any additional weights. Double stator axial field SRM is used due to its structure that can be mounted inside the wheel. The charging circuit is integrated with the asymmetric converter and phase windings of SRM, reducing the cost and size of the system. Magnetic resonance is implemented to increase the efficiency. Simulations done in Maxwell and Simplorer verify the effectiveness of the proposed system.