• 제어로봇시스템학회논문지
• /
• 제12권11호
• /
• pp.1130-1137
• /
• 2006

Relaxed Static Stability(RSS) concept has been applied to improve aerodynamic performance of modern version supersonic jet fighter aircraft. Therefore, the flight control systems are necessary to stabilizes the unstable aircraft and provides adequate handling qualities. The initial production flight control system are verified by flight test and it's always an elements of danger because of flight-critical nature of control law function and design error due to model base design method. These critical issues impact to flight safety, and it could be lead to a loss of aircraft and pilot's life. Therefore, development of an easily modifiable RFCS(Research Flight Control System) capable of reverting to a PFCS(Primary Flight Control System) of reliable control law must be developed to guarantee the flight safety. This paper addresses the concept of SSWM(Software Switching Mechanism) using the fader logic such as TFS(Transient Free Switch) based on T-50 flight control law. The result of the analysis based on non-real time simulation in-house software using SSWM reveals that the flight control system are switching between two computers without any problem.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권8호
• /
• pp.3435-3454
• /
• 2016

Device-to-device (D2D) communication is a potential solution to the incessant increase in data traffic on cellular networks. The greatest problem is how to control the interference between D2D users and cellular mobile users, and between D2D users themselves. This paper proposes a solution for this issue by putting the full control privilege in cellular network using the software-defined networking (SDN) concept. A software virtual switch called Open vSwitch and several components are integrated into mobile devices for data forwarding and radio resource mapping, whereas the control functions are executed in the cellular network via a SDN controller. This allows the network to assign radio resources for D2D communication directly, thus reducing interference. This solution also brings out many benefits, including resource efficiency, energy saving, topology flexibility, etc. The advantages and disadvantages of this architecture are analyzed by both a mathematical method and a simple implementation. The result shows that implementation of this solution in the next generation of cellular networks is feasible.

• 전력전자학회논문지
• /
• 제4권1호
• /
• pp.82-90
• /
• 1999

본 논문은 단일 스위치 3상 ZCS 강압형 정류기의 펄스주파수 제어기법을 다루고 있다. 제안하는 펄스주파수 제어방법은 거의 정현적인 입력전류를 흐르게 하여 3상 강압형 정류기의 성능을 보여준다. 제안하는 제어구조의 유용성을 검증해 주는 시뮬레이션과 실험 결과는 단일 스위치 3상 ZCS 강압형 정류기의 고역율, 입력전류의 낮은 THD, 부하 변동에 대한 전압의 응답특성들이 뛰어남을 보여준다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.777-780
• /
• 2003

In this paper, an improved full wave mode ZVT-PWM DC-DC Converter is presented to maximize the regeneration ratio of resonant energy by only putting an additional diode in series with auxiliary switch. The operation of auxiliary switch in a half wave mode makes possible the soft switching condition of all switches. Furthermore, the increase of the regeneration ratio to resonant energy results in low conduction losses and minimum voltage and current stresses. The operation principles of the proposed converters are analyzed using the PWM boost converter topology as an example. Theoretically analysis and experimental results verify the validity of the boost converter topology with the proposed full wave mode ZVT-PWM converters

• Journal of the Korean Data and Information Science Society
• /
• 제28권4호
• /
• pp.911-925
• /
• 2017

We investigate the properties of multivariate Shewart control charts with VSI procedure for monitoring simultaneous monitoring mean vector and covariance matrix in term of ANSW (average number of switches), probability of switch and ASI (average sampling interval), ATS (average time to signal). From examining the ANSW values, we know that it does not switch frequently. The VSI control charts are superior to the corresponding FSI control charts in terms of ATS. And, it can be also seen that the VSI procedures have substantially fewer switches for small or moderate shifts of the mean vector and variances.

• Journal of Power Electronics
• /
• 제7권2호
• /
• pp.118-123
• /
• 2007

This paper presents a new ZCS-PWM high frequency inverter. Zero current switching operation is achieved in the whole load range by using a simple auxiliary reverse blocking switch in parallel with series resonant capacitor. Dual duty cycle control scheme is used to provide a wide range of high frequency AC output power regulation that is important in many high frequency inverter applications. It found that a complete soft switching operation can be achieved even for low power setting ranges by introducing high-frequency dual duty cycle control scheme. The proposed high frequency inverter is more suitable for consumer induction heating(IH) applications. The operation and control principle of the proposed high frequency inverter are described and verified through simulated results.

• 한국정보과학회논문지:정보통신
• /
• 제30권4호
• /
• pp.520-534
• /
• 2003

본 논문에서는, $a{\times}b$ 출력 버퍼 스위치로 구성된 fat-tree 망의 성능 예측 모형을 제안하고, 스위치에 장착된 버퍼의 개수 증가에 따른 성능 향상 추이를 분석하였다. Buffered 스위치 기법은 스위치 네트웍 내부의 데이타 충돌 문제를 효과적으로 해결할 수 있는 방법으로 널리 알려져 있다. 제안한 성능 예측 모형은 먼저 네트웍 내부 임의 스위치 입력 단에 유입되는 데이타 패킷이 스위치 내부에서 전송되는 유형을 확률적으로 분석하여 수립되었다. 제안한 모형은 스위치에 장착된 버퍼의 개수와 무관하게 출력 버퍼를 장착한 $a{\times}b$ 스위치의 성능, 즉 네트웍 성능 평가의 두 가지 주요 요소인 네트웍 정상상태 처리율(Steady state Throughput, ST)과 네트웍 지연시간(Network Delay)의 예측이 가능하다. 또한 모형의 이해를 도모하기 위하여 지능형 네트워크 트래픽 제어 및 중도 소실 패킷에 대한 다양한 처리 기능 등 최근 개발되는 스위치 네트워크의 부가기능을 배제하고 수식을 정리하였다. 그러나, 제안된 분석 모형은 이들 다양한 성능 향상 기술이 적용된 네트워크, 그리고 다양한 크기의 네트워크 성능분석에도 쉽게 적용이 가능하다. 제안한 수학적 성능 분석 연구의 실효성 검증을 위하여 병행된 시뮬레이션 결과는 상호 미세한 오차 범위 내에서 모형의 예측 데이타와 일치하는 결과를 보여 분석 모형의 타당성을 입증하였다.

• Journal of Power Electronics
• /
• 제3권4호
• /
• pp.249-258
• /
• 2003

This paper presents a high-efficient and cost effective three-phase AC/DC-DC/AC power conversion system with a single two-switch type active Auxiliary Resonant DC Link (ARDCL) snubber circuit, which can minimize the total power dissipation. The active ARDCL snubber circuit is proposed in this paper and its unique features are described. Its operation principle in steady-state is discussed for the three phase AC/DC-DC/AC converter, which is composed of PWM rectifier as power factor correction (PFC) converter, sinewave PWM inverter. In the presented power converter system not only three-phase AC/DC PWM rectifier but also three-phase DC/AC inverter can achieve the stable ZVS commutation for all the power semiconductor devices. It is proved that the proposed three-phase AC/DC-DC/AC converter system is more effective and acceptable than the previous from the cost viewpoint and high efficient consideration. In addition, the proposed two-switch type active auxiliary ARDCL snubber circuit can reduce the peak value of the resonant inductor injection current in order to maximize total system actual efficiency by using the improved DSP based control scheme. Moreover the proposed active auxiliary two-switch ARDCL snubber circuit has the merit so that there is no need to use any sensing devices to detect the voltage and current in the ARDCL sunbber circuit for realizing soft-switching operation. This three-phase AC/DC-DC/AC converter system developed for UPS can achieve the 1.8% higher efficiency and 20dB lower conduction noise than those of the conventional three-phase hard-switching PWM AC/DC-DC/AC converter system. It is proved that actual efficiency of the proposed three-phase AC/DC-DC/AC converter system operating under a condition of soft switching is 88.7% under 10kw output power.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1937-1941
• /
• 2004

We present lateral actuated piezoelectric actuator using U-shaped PZT strip and lever structure for the RF switch application. In the previous study of RF switch, they used horizontal contact switch fabricated by thin film metals. However, thin film metals could not generate large contact force due to low stiffness. In this work, we suggest lateral contact switch which makes large contact force by increasing stiffness. In addition, we use PZT actuator for the high force actuation. Generally actuator using thin film PZT moves to the vertical direction due to the neutral axis shift. Therefore we need lateral motion generation mechanism based on the thin film PZT actuator. In order to increase lateral motion of thin film PZT actuator, we use U-shaped PZT actuator using residual stress control. Also, thin film PZT actuator can generate very small lateral motion of 120${\times}$10$^{-6}$ ${\mu}{\textrm}{m}$/V for d$_{31}$ mode, thus we suggest lever structure to increase stroke amplification. From the experimental study, fabricated PZT actuator shows maximum lateral displacement of 1 ${\mu}{\textrm}{m}$, and break down voltage of the thin film PZT actuator is above 16V.

• 전력전자학회논문지
• /
• 제15권6호
• /
• pp.432-440
• /
• 2010

본 논문에서는 단일 스위치를 사용한 LC 직렬 공진형 부스트 컨버터를 제안하였다. 제안하는 토폴로지는 별도의 보조 스위치의 추가 없이 일반 부스트 컨버터에 수동소자만을 추가하여 스위치 턴-온, 턴-오프 시 영전압 스위칭(ZVS; Zero Voltage Switching)을 수행한다. 이 토폴로지는 LC직렬 공진에 의해 스위치 오프 타임이 결정되므로, 스위치 온 타임을 가변하여 출력전압을 조절하는 온 타임 가변형 주파수 변조 기법으로 제어된다. 전류 도통 경로에 따라 제안된 회로의 동작 모드를 구분하였고, 제안된 컨버터의 동작모드와 특성은 수학적 해석과 시뮬레이션 및 실험을 통해서 검증하였다.