• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.617-629
• /
• 2003

A recent development in cosmetics has been the pursuit of wrinkling in the skin. The cosmetics composed of anti-wrinkle agent stand out from the point of view of environmental contamination and pollution. Among them, Indole-3-acetic acid (IAA), studied with wrinkling pigmentation and swelling conditions in the area of the eye, showed clinically significant reduction in depth of lines during one month trial using skin treatment. But, IAA has shown some problems when used in cosmetic formulations, such as stability, permeability and toxicity. The results of the clinical examination were shown that its permeability and toxicity didn't matter. To increase the stability of IAA, antioxidants such as Licorice, ubiquinone, tocopherol, Baicalin, ferulic acid, BHT, ascorbic acid, sodium metabisulfite, and so on were employed in cosmetic formulations. Our main purpose is the study for the stability efficiency and effect of each other of cream formulations containing optimal dosage antioxidants (o/w type emulsion), This study evaluated wrinkle reduction effect of IAA, which is used in cosmetics.

• Journal of Veterinary Clinics
• /
• v.23 no.3
• /
• pp.279-285
• /
• 2006

Thirty dairy cows with pododermatitis were selected and treatment effect of ozone ointment for bovine pododermatitis was investigated. In addition, bactericidal effect of ozone ointment on etiological agent of bovine pododermatitis was evaluated. The pathohistological examination for the pododermatitis, according to application with ozone ointment was investigated. Thirty dairy cows were divided two groups: control group(vaseline group: 15 cows), treatment group(ozone ointment group: 15 cows). Various parameters were evaluated in terms of the lameness score, swelling score, lesion score, WBC, neutrophil, pathohistological finding, and antimicrobial action. As compared with vaseline group, ozone ointment group revealed significant decrease of lameness(p<0.05), swelling(p<0.01) and lesion score(p<0.05) were shown in hoof lesions on 14 days after application. In hematological findings, WBC count revealed slightly high values within normal range before treatment, however, this was 1Corresponding author improved on 14 days after application of ozone ointment. The number of neutrophils was slightly higher than that of normal, however, this was improved on 14 days after application of ozone ointment. In pathohistological findings, normal dermal tissue was found in tissues with pododermatitis on 14 days after application of ozone ointment. In antimicobial action, marked decrease rate of bacteria was observed in feet of all cases treated with ozone ointment. The decreasing rate of bacteria in anaerobic culture was higher than that in aerobic culture.

• Journal of Veterinary Clinics
• /
• v.23 no.3
• /
• pp.272-278
• /
• 2006

This study was carried out to determine therapeutic the effect of ozonated water therapy on bovine pododermatitis. In addition, bactericidal effect of ozonated water on etiological agent of bovine pododermatitis was examined. The pathohistological examination for the pododermatitis, according to application with ozonated water and ozone ointment was investigated. Thirty healthy cattle were divided two groups(each of 15) : control group(povidone group), treatment group(ozone solution group). Various parameters were evaluated in terms of the lameness score, swelling score, lesion score, WBC count, neutrophil count, pathohistological finding, and antimicrobial action. The decrease of lameness and lesion score were shown in hoof lesions on 14 days after application of ozonated water. Significant decrease of swelling was shown in hoof lesions on 14 days 1Corresponding author after application of ozonated water(p<0.01). In hematological findings, WBC count revealed values within normal range. The number of neutrophils was slightly higher than that of normal, however, this was improved on 14 days after application of ozonated water. In pathohistological findings, recovery was rapid macroscopically and microscopically in the treatment with ozonated water on the hoof lesions and ozonated water was effective. In antimicobial action, bactericidal effect was observed in treatment with ozonated water on the hoof lesions and ozonated water was effective.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.434-441
• /
• 2010

Sodium polyacrylate (PAANa) was synthesized by inverse emulsion polymerization method to absorb excess water in concrete. Liquid paraffin was used as a continuous phase. Acrylic acid (AA) was neutralized by aqueous sodium hydroxide solution (8 M). Different amount of N,N'-methylene bisacrylamide (MBA) was used as a crosslinking agent to change crosslinking density of the synthesized PAANa. The size distribution of synthesized particles was measured by particle size analyzer. Swelling ratio of crosslinked PAANa was evaluated from the equation in D. I. water, cement aqueous solution, and $Ca(OH)_2$ aqueous solution. The FTIR spectroscopy was used to characterize $Ca^{2+}$ ion interaction with PAANa. Incorporation of 1.0 wt% PAANa into cement increased compressive and flexural strength approximately 30% and 10%, respectively, compared with those of ordinary portland cement.

• Korean Membrane Journal
• /
• v.2 no.1
• /
• pp.36-47
• /
• 2000

This paper deals with the separation of MTBE-methanol mixtures using crosslinked Poly(vinyl alcohol)(PVA) membranes with sulfur-succinic acid(SSA) as a crosslinking agent by pervaporation and vapor permeation technique. The operating temperatures, methanol concentration in feed mixtures, and SSA concentrations in PVA membranes were varied to investigate the separation performance of PVA/SSA membranes and the optimum separation characteristics by pervaporation and vapor permeation. And also, for PVA/SSA membranes, the swelling measurements were carried out to study the transport phenomena. The swelling measurements were carried out for pure MTBE and methanol, and MTBE/methanol=90/10, 80/20 mixtures using PVA/SSA membranes with varying SSA compositions. There are two factors of the membrane network and the hydrogen bonding. In pervaporation separation was also carried out for MTBE/methanol=90/10, 80/20 mixtures at various temperatures. The sulfuric acid group in SSA took an important role in the membrane performance. The crosslinking effect might be over the hydrogen bonding effect due to the sulfuric acid group at 3 and 5% SSA membranes, and this two factors act vice versa on 7% SSA membrane. In this case, the 5% SSA membrane shows the highest separation factor of 2,095 with the flux of 12.79g/㎡$.$hr for MTBE/methanol=80/20 mixtures at 30$^{\circ}C$ which this mixtures show near the azeotopic composition. Compared to pervaporation, vapor permeation showed less flux and similar separation factor. In this case, the flux decreased significantly because of compact structure and the effect of hydrogen bonding. In vapor permeation, density or concentration of methanol in vaporous feed is lower than that of methanol in liquid feed, as a result, the hydrogen bonding portion between the solvent and the hydroxyl group in PVA is reduced in vapor permeation. In this case, the 7% SSA membranes shows the highest separation factor of 2,187 with the flux of 4.84g/㎡$.$hr for MTBE/methanol=80/20 mixtures at 30$^{\circ}C$.

• Elastomers and Composites
• /
• v.49 no.4
• /
• pp.305-312
• /
• 2014

Most of military supersonic aircraft use an afterburner. It plays an important role in performing unusual duties for supersonic flight, takeoff, and combat situations. Recently, repetitive fuel leakage from the inner piston packing rubber of afterburner fuel pump in an aircraft J85-GE-21 turbojet engine has happened. These failures have only happened in one manufacturer's parts of two manufacturers. Thus, the cause of these failures was investigated through the comparative analysis for both the failed and the unfailed with two different manufacturers using various analysis methods. The failure analysis was performed using analysis methods such as swelling or swelling ratio, total sulfur content, polymer identification, loading and surface area of carbon black, and hardness. Consequently, the main cause of this failure was identified to be insufficient loading of carbon black as a reinforcing agent, together with small surface area of carbon black and somewhat low sulfur content.

• Elastomers and Composites
• /
• v.53 no.3
• /
• pp.175-180
• /
• 2018

Solution-styrene-butadiene rubber (SSBR) composites were manufactured using four kinds of fillers: silica-silane coated carbon black (SC-CB) hybrid, starch-SC-CB hybrid, pure silica, and pure starch. The influence of filler type on the mechanical properties of the rubber matrix was studied in this work. SC-CB was prepared by silane-graft-coating using vinyl triethoxy silane and carbon black, which enhanced the dispersion effect between the rubber matrix and the filler, and improved the mechanical properties of the compounds. The morphology of the composites was observed by field-emission scanning electron microscopy (FE-SEM). The thermal decomposition behavior of the composites was determined by thermogravimetric analysis (TGA), and the crosslinking behavior of the composites was tested using a rubber process analyzer (RPA). The hardness, tensile strength, swelling ratio, and gas transmittance rate of the composites were evaluated according to ASTM. The test results revealed that with the addition of SC-CB, the hybrid fillers, especially those blended with silica, showed a better reinforcement effect, the highest hardness and tensile strength, and stable thermal decomposition behavior. This implies that the silica-SC-CB hybrid filler has a notable mechanical reinforcement effect on the SSBR matrix. Because of self-crosslinking during its synthesis, the starch-SC-CB hybrid filler produced the most dense matrix, which improved the anti-gas transmittance property. The composites with the hybrid fillers had better anti-swelling properties as compared to the neat SSBR composite, which was due to the hydrophilicity of silica and starch.

• Membrane Journal
• /
• v.2 no.1
• /
• pp.36-36
• /
• 1992

This paper deals with the separation of MTBE-methanol mixtures using crosslinked Poly(vinyl alcohol)(PVA) membranes with sulfur-succinic acid(SSA) as a crosslinking agent by pervaporation and vapor permeation technique. The operating temperatures, methanol concentration in feed mixtures, and SSA concentrations in PVA membranes were varied to investigate the separation performance of PVA/SSA membranes and the optimum separation characteristics by pervaporation and vapor permeation. And also, for PVA/SSA membranes, the swelling measurements were carried out to study the transport phenomena. The swelling measurements were carried out for pure MTBE and methanol, and MTBE/methanol=90/10, 80/20 mixtures using PVA/SSA membranes with varying SSA compositions. There are two factors of the membrane network and the hydrogen bonding. In pervaporation separation was also carried out for MTBE/methanol=90/10, 80/20 mixtures at various temperatures. The sulfuric acid group in SSA took an important role in the membrane performance. The crosslinking effect might be over the hydrogen bonding effect due to the sulfuric acid group at 3 and 5% SSA membranes, and this two factors act vice versa on 7% SSA membrane. In this case, the 5% SSA membrane shows the highest separation factor of 2,095 with the flux of 12.79g/㎡·hr for MTBE/methanol=80/20 mixtures at 30℃ which this mixtures show near the azeotopic composition. Compared to pervaporation, vapor permeation showed less flux and similar separation factor. In this case, the flux decreased significantly because of compact structure and the effect of hydrogen bonding. In vapor permeation, density or concentration of methanol in vaporous feed is lower than that of methanol in liquid feed, as a result, the hydrogen bonding portion between the solvent and the hydroxyl group in PVA is reduced in vapor permeation. In this case, the 7% SSA membranes shows the highest separation factor of 2,187 with the flux of 4.84g/㎡·hr for MTBE/methanol=80/20 mixtures at 30℃.

• Membrane Journal
• /
• v.15 no.1
• /
• pp.8-14
• /
• 2005

The hyaluronic acid (HA) with excellent biocompatibility can be combined with the monomer polylactide with good biodegradability to produce biocompatible materials which can control the period of degradation in a human body. By freeze drying method, HA and the lactic acid, monomer of polylactide, or lactide, the ester dimer of polylactide, were crosslinked with crosslinking agent, l-ethyl-3-(3-dimethyl aminopropyl) carbodiimide. The analysis of infrared spectroscopy showed that the ester linkage was formed and the analysis of nuclear magnetic resonance (NMR) spectroscopy showed that the ester linkage was due to the reaction of lactic acid and HA. The conversion (6∼32%) and degree of crosslinking (4∼19%) increased but the selectivity was almost constant at 62% as the mole ratio of LA to HA increased from 1 to 10 in the crosslinking reaction. The brittleness became more pronounced and the rate of degradation became faster with more addition of lactic acid resulting from the higher ratio of LA to HA, and the swelling ratio was in the range of 500 to 2000%.

• YAKHAK HOEJI
• /
• v.58 no.5
• /
• pp.343-348
• /
• 2014

In the present studies, we examined effect of chamomile flowers extract (CH-Ex), which has traditionally been used as antiphlogistics in Europe for many centuries, against Candida albicans-caused septic arthritis. Candida albicans is a major etiological agent among fungal septic arthritis. This effect was investigated in a murine model of the septic arthritis. That is, mice that were given an emulsion form of C. albicans cell wall (CACW) via footpad route were treated intraperitoneally with the CH-Ex for 3 times every 3 days. Degrees of the footpad-swellings were measured with dial gauger. Data showed that the CH-Ex resulted in the reduction of swelling. For instance, at Day 9 when swelling reached the highest peak, there was up to app. 60% reduction of edema in mice injected with the CH-Ex, compared to that of the control mice that received no treatment (P<0.05). This therapeutic anti-arthritic activity appeared to be mediated by inhibitions of NO (nitric oxide) production from activated RAW264.7 macrophages and proliferation of Con A-treated T lymphocytes. Analysis by HPLC revealed that the CH-Ex contained eight polyphenolic compounds including chlorogenic acid (CRA) and rutin. We have reported the CRA and rutin respectively have the anti-arthritic activity. This correlation implicates that CRA and rutin in the CH-Ex may be responsible for the activity. Combined all together, the CH-Ex has anti-arthritic activity against C. albicans-caused septic arthritis, possibly by inhibiting NO production and proliferation of T cells. This activity seems to be contributed by, at least, CRA and rutin among the compounds in the CH-Ex.