• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.221-221
• /
• 2015

Sustainable use of water resource and conservation of water quality are essential problems in the world. Especially, problems of water quality are serious one for human health as well as ecological system of all creatures on the earth. Recently, the importance of total effluent load as well as the concentrations of pollutant materials has been recognized not only for the conservation of water quality but also for sustainable water use in watersheds. However, the measurement or estimation of total effluent load from non-point source area such as farm lands or forests may be more difficult because both of concentration and discharge of the water are greatly changed depending on various factors especially metrological conditions such as rainfall, while the measurement from a point source area may be easy because the concentration of pollutant materials and amount of discharge water are relatively steady. Therefore, the total effluent load from a non-point source is often estimated by statistical relationships between concentration and discharge, which is called as L-Q equation. However, a lot of work and time are required to collect and analyze water samples and to get the accurate relationship or regressive equation. So, we proposed a new system for direct measurement of total effluent load of water quality from non-point source areas to solve the problem. In this system, the overflow depth at a hydraulic weir is measured with a pressure gage every hourly interval to calculate the amount of hourly discharge at first. Then, the operating time of a small electric pump to collect an amount of water which is proportional to the discharge is calculated to intake the water into a storage tank. The stored water is taken out a few days later in a case of storm event or several weeks later in a case of non-rainfall event and the concentrations of water quality such as total nitrogen and phosphorous are analyzed in a laboratory. Finally, total load of the water quality can be calculated by multiplying the concentration by the total volume of discharge. The system was installed in a small experimental forestry watershed to check the performance and know the total load of water quality from the forest. It was found that the system to collect a proportional amount of water to actual discharge operated perfectly and a total load of water quality was analyzed accurately. As the result, it was expected that the system will be very available to know the total load from a non-point source area.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.19 no.4
• /
• pp.26-39
• /
• 2020

This study analyzed the usage characteristics and requirements of students who are users of the middle school education space, and the following results were obtained: First, we could see that various types of classes were needed, such as lecture-style classes, team projects, and four-person consultation and discussion classes, in a way that helped to improve the desirable teaching patterns and learning ability. Second, the place where space was used during the break and the relationship between peers, revealed that most of them were in the classroom and the hallway, and the peer group was composed of three to eight people or more, that were active with various compositions. Third, a gym, library, toilet, stairway, cafeteria, nurse's office, and teachers' room appeared in the center of the building, indicating the need for a balanced layout. Fourth, physical education (dance) rooms, audiovisual rooms (performance rooms), workshops (personal creation), snack bar, rest area, spacious indoor square, and study rooms were needed as facilities that can help learning activities other than current facilities. These outcomes show that the existing classroom layout and space composition formats require some spatial restructuring.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.21 no.4
• /
• pp.21-28
• /
• 2022

This study analyzes the reality of the overall operating system, such as recognition and satisfaction with school field support work system of the Education Facilities Management Center, recognition level of restructuring of work areas, and the direction of improvement for school facility maintenance support in various types of future learning environments. To analyze the problem of this study, a survey was conducted on 290 education administrative officials in Gyeonggi-do. First, school site awareness and work performance satisfaction of the Educational Facilities Management Center were evaluated as "below average," and it is necessary to improve the qualitative work area that is practically helpful to schools. Second, in the area of organizational operation, it is desirable to avoid simple tasks with a low evaluation of "below average" and to switch to an operating system that improves efficiency. Third, the need for the facility environment area (professionalism, safety) was the highest, but the center's ability and work processing level were evaluated very low as "below average," so it is urgent to improve the center's capacity. Fourth, in the area of social and educational policy change, the center received a high score for the need for access from the perspective of a learning environment linked to future education. Therefore, a policy review on the restructuring and improvement of work areas suitable for this is necessary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.449-458
• /
• 2016

The study verified the work capacity (job performance, perception, knowledge) and satisfaction on managing the inventory of operating room nurses working in a more than 700-bed hospital. The purpose of this study was to provide basic data of education for work capacity and satisfaction and quality insurance by analyzing the scores between the three different operating rooms and the correlation between the work capacity and satisfaction by investigating the related factors. This study presented a structured and self-administered questionnaire to 181 nurses who had been working in the operating room more than six months. The mean and standard deviation of the job performance, perception, knowledge, and satisfaction were 4.2(${\pm}0.56$), 3.4(${\pm}0.76$), 3.5(${\pm}0.40$), and 3.4(${\pm}0.55$), respectively. The work capacity and satisfaction of each group did not show a statistically significant difference. The correlations between the job performance and knowledge, knowledge and perception, perception and satisfaction were positive (r=.627, p<0.01), (r=.663, p<0.01) and (r=.485, p<0.01), respectively. Among the factors related to the general characteristics of operating room nurses, only age significantly affected their job performance. This study provides basic data on the maintenance and improvement of their competence and satisfaction by being served as a resource for sustainable human resources management and training, and efficient management of the communication channel between hospitals.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.275-298
• /
• 2011

In 2010, it appears that Korean economic growth rate heavily depends on its international trade. Thus, a sustainable growth of the international trade is very important to Korea. To increase export, a continuous making profits is the most important to companies and TSO(Trade Support Organization) needs to provide a trade support services to the exporting firms. In this context, this study aims to provide a comprehensive analysis of the correlation between company performance and service quality, utilization and customer satisfaction of TSO. Some implications from the results of this study are suggested. First, TSO needs to boost the utilization of its services by enhancing systemizing, reliability and empathy of its service qualities. And then, TSO needs to encourage companies to focus on export-oriented business mind, since these companies have tendency to show a better practical application and high degree of performance as well. Third, TSO needs to develop some exceptional services for the companies with the low weight of export in turnover since those groups tend to have higher customer satisfaction. Our major findings contribute to the trade support service planning of TSO.

• Journal of Technology Innovation
• /
• v.20 no.1
• /
• pp.17-43
• /
• 2012

Alliance formation has been recognized as an important strategy for firms who seek to survive through acquisition of sustainable competitive advantages. Specifically in high-tech industries, firms may consider formation of strategic alliances in order to access valuable external knowledge. These firms tend to be situated in a dilemma that they should choose between exploration and exploitation, which are two types of strategic choices suggested by March (1991). Working out the dilemma has been extensively discussed in the area of strategy or organization learning. Recently, however, an increasing number of studies have stressed on a balance between exploration and exploitation. Regarded as 'ambidextrous organizations' (Lavie and Rosenkopf, 2006), these firms that simultaneously pursue exploration and exploitation have emerged in high-tech industries, and many studies have provided evidence of positive association between organizational ambidexterity and firm performance. In the strategic alliance research, accordingly, scholars began to pay attention to the balanced choice between exploration-and exploitation-oriented alliances. Given these backgrounds, this study examines the relationship between alliance ambidexterity and firm performance. While previous research approached alliance ambidexterity mainly from the number of alliances, our study suggests ambidexterity in terms of alliance portfolio and alliance partner. Our dataset consists of biotechnology or pharmaceutical firms in the United States, which spans time period between 1990 and 2005. We conduct panel data analysis. The results show the strong link between alliance ambidexterity and firm performance, highlighting the balance between exploration and exploitation when firms make strategic decisions.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.731-746
• /
• 2011

The successful and sustainable growth of SMEs depends on their ability of strengthen their competitiveness in quality and cost and service more than anything else as a fundamental of operation. Among these key competitive factors of SMEs, quality is the most critical factor in manufacturing business fields. Because quality strongly influence cost and service performance on this manufacturing business field. There are many different ways to improve the quality performance but it needs proper management decision to choose the best way what can maximize outputs with minimum inputs. And it needs effective measurement methods and some indicators to analysis the quality performance properly. The quality cost is one of the simplest key indicators to measure the quality performance and the effectiveness of quality related management decisions. The major purpose of this study is to diagnose the categorized current level of actual quality cost of local SMEs to maximize their quality management effectiveness through comparing their level with others what's expressed in early studies. In this study, through survey on local SMEs, we found that their average annual quality cost ratio versus turnover - Total amount of annual quality cost divided by annual turnover - is around 3.69% excluded some SME's performances what have different quality control measures with others. And we found some results what corresponded with the early studies on the correlations between those categorized quality costs factors and some discrepancies between some of the literature model and the early case study results as follows. There were negative correlations between the Prevention costs and the External failure costs, and the Appraisal costs and the External failure costs, and there was positive correlation between the Appraisal costs and Internal failure costs same as early studies. But, we couldn't found any strong negative correlations between the Cost of control - Preventive costs & Appraisal costs - and the Cost of Failure of control - Internal & External failure costs -. It reveals not only the lack of effectiveness on their preventive or appraisal activities but also it can reveal there were so many effective ways to prevent the failure costs properly such as some innovative investment on Factory automation includes Error Proofing and more preventive actions to improve the effectiveness of the typical management methods likes CE (Concurrent Engineering), APQP (Advanced Product Quality Planning), FMEA (Failure Mode & Effect Analysis) etc.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.468-475
• /
• 2005

Biofilters packed with various materials have emerged as a sustainable technology for the treatment of volatile organic compounds (VOCs); however, problems including low performance and clogging are commonly encountered. Recently, a bioactive foam reactor (BFR) using surfactants has been suggested to ensure efficient and stable VOCs removal performance. This study was mainly conducted to investigate the feasibility of BFRs using toluene as a model compound. Prior to bioreactor studies, a series of bottle tests were used to select a suitable surfactant for the BFR application. Experimental results of the batch bottle tests indicated that TritonX-100 was the most appropriate one among the surfactants tested, since it showed a minimal effect on the toluene biodegradation rate while the other surfactants lowered the toluene biodegradation rate significantly. Using the selected surfactant, the BFR performance was determined by changing operating parameters including gas residence time and toluene loading. As the gas residence time increased from 0.5 minutes to 2 minutes, the toluene removal efficiency increased from approximately 50% to 80%. In addition, an increase of the toluene loading from $38\;g/m^3/hr$ to $454\;g/m^3/hr$ resulted in a decrease of toluene removal efficiency from approximately 70% to 20%. The BFR had a maximum elimination capacity of $108\;g/m^3/hr$ for toluene, which was much higher than those generally reported in the literature. The high toluene-elimination performance indicates that the BFR be a potential alternative to the conventional, packed-type biofilters. However, the limitation of toluene solubilization and foam stability at either high or low gas flow rate are still problems to be challenged.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.31-39
• /
• 2014

Purpose - Environmental issues, climatic changes, and greenhouse gases are problems to be solved at a global level. With an increased emphasis on the environmental and social responsibility of the management of companies, the manner in which companies approach quality-oriented culture and their individual sustainability management are being discussed as truly important issues to help them secure their competitiveness and growth strategies. This study proposes strategic directions to help manufacturers not only in expanding their competitive quality-oriented company culture but also in strengthening their sustainability management abilities. This study conducts a literature review and empirical research to examine how significantly the variables of a quality-oriented company culture, customer-centered management, and process-centered and supply chain management-centered cooperation affect sustainability management performance in relation to economic profitability, environmental integrity, and social responsibility. Research design, data, and methodology - To verify research models and hypotheses, the study examined 170 companies using a questionnaire survey conducted over six weeks, and involved the performance of data analysis on 146 samples. Questionnaire responses were calibrated based on a Likert scale. The study used the Smart PLS 2.0 program designed for PLS (partial least squares), an analysis instrument of SEM (structural equation modeling). The study then verified empirical research hypotheses working on reliability analysis, validity analysis, factorial analysis, and path analysis. Results - Among the nine hypotheses, four are accepted and the rest are rejected. A quality-oriented company culture focusing on customer-centered management significantly influenced the maintainability management performance of environmental integrity and social responsibility, while economic profitability was dismissed. A process-focused quality-oriented company culture was significantly concerned with economic profitability but not with environmental integrity or social responsibility. A supply-chain cooperative company culture had a significant effect on economic profitability but not on environmental integrity or social responsibility. Conclusion - This study proposes strategic directions to help manufacturers expand their competitive quality-oriented company culture as well as strengthen abilities with sustainability management. It conducts a literature review and empirical research to examine how significantly the variables of quality-oriented company culture, customer-centered management, and process-centered and supply chain management-centered cooperation affect sustainability management performance in relation to economic profitability, environmental integrity, and social responsibility. There are two main conclusions. First, companies should consider the need for social responsibility management and environmental transparent management-focused maintainability management as avenues to create new markets and business, thereby helping the companies secure a reputation for having a customer and process-centered quality-oriented company culture by creating shared values between supply chains and enabling win-win situations through cooperation. Second, we are marching towards a creative win-win era from a society of conflicts and ruptures. Companies should understand that social responsibility management and supply chain management (SCM)-focused cooperation are the foundations of sustainable development, as they try to improve their culture while pursuing both win-win relationships with interested parties and equity in various conflictive relations.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.155-167
• /
• 2018

This study was designed to provide implications for related policies by researching the impact on business management performances focusing on the activities within the innovation clusters based on small and medium venture companies in Daejeon area. The questionnaires from 212 CEOs of small and medium venture businesses in Daejeon were analyzed and verified the research hypothesis using SPSS 21. From the empirical analysis, we confirmed the following results; activity of information exchange, information acquisition and solving activity between demand and supplier showed positive effects on business management performance, however the concern and relationship have no effects on business management performance. From this study, we suggest that the active participation in activity of innovation cluster and various supporting systems or policies have to expand for sustainable growth and development of companies within innovation cluster. We also propose that companies needs to try to more efforts on enhance the mutual satisfaction or forming a consensus for cooperation. This study also propose the implications that the companies, innovation cluster must try on efforts to improve relation among members for enhancing the lack of concerns and relationship.