• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1136-1141
• /
• 1992

This paper proposes a control technique to obtain high frequency quasi sinusoidal DC-Link waveform permitting zero-voltage-switching(ZVS). This operation results in reduction of commutation stress and switching losses in the power devices because they cause no switching loss in principle. But in existing control methods, the resonant capacitor voltage is not frequently made of zero-cross oscillation. We propose an optimum control stratege which can sustain oscillation and keep the capacitor voltage at an allowable level. Some experimental results are included to confirm the validity of the analytical results.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.225-230
• /
• 2008

Reactor starting method has the advantage of simplicity and closed transition in spite of lower starting torque per kVA. This method allows a smooth start with almost no observable disturbance on transition and is suitable for applications such as centrifugal pumps or fans. Reactive power doesn't contribute to work but needs to sustain the electromagnetic field required for the induction motor to operate. Starting power factor of induction motor is specially lower than running power factor. Power factor application is needed to compensate for the lower power factor of induction motor. This power factor compensation systems is occasionally being hit by the effects of the starting reactor connection position at the starting, stopping of high-voltage induction motor. This paper describes voltage and current stress affected by the installation position of power factor compensation application at the reactor starting method.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.68-70
• /
• 2006

A new low-cost energy-recovery circuit (ERC) for a plasma display panel (PDP) is proposed. It has two auxiliary switches clamped on a half sustain voltage, and inductor currents are built up before the PDP is charged and -discharged. Therefore, it features a low cost, fully charged/discharged PDP, zero voltage switching (ZVS), low electromagnetic interference (EMI), low current stress, no severe voltage notch, and high energy-recovery capability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.97-98
• /
• 2000

This paper deals with the relationship between the addressing and the display in ac-PDP. Especially, deals with the transfer probability of surface discharge according to addressing voltage (Va), blocking voltage(Vg) in addressing period and the characteristics of luminance according to sustain voltage(Vs) in sustaining period with ADS(Address Display period Separation) driving method.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2016-2018
• /
• 1999

Until now, there is no report for the relationship between the condition of addressing and the characteristics of surface discharge in ac- PDP. We have known that such experiments were important to drive a-PDP. Therefore, This paper deals with the probability of transfer and the characteristics of luminance according to addressing voltage (Va), blocking voltage (Vg)in addressing period and sustain voltage(Vs)in sustaining period and we use waveform according to ADS (Address and Display period Separation) method.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1721-1723
• /
• 1997

In AC Plasma Display Panel(PDP), serious problems are low radiation brightness and very high discharge voltage. To solve these problems, it is necessary to obtain optimal frequency of drive waveform and optimal gas mixing ratio. This paper presents firing voltage and sustain voltage as frequency of waveform and gas mixing ratio, and proposes optimal frequency of drive waveform and optimal gas mixing ratio.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.119-123
• /
• 2011

We have investigated the luminous efficiency of various cell resolution and structure from 50" FHD to 50" QFHD Plasma Display. The suggested test panels have two different cell array types which are the delta and matrix cell array type. The results showed that, in the case of the suggested QFHDs, the firing and sustain voltage were increased and voltage margin was decreased. These results are caused by the reduced wall voltage and increased charged particle loss, at the side wall. The luminance of the suggested QFHDs was lower from 20% to 40% than that of the suggested FHDs and the power consumption was higher from 42% to 83% than that of the suggested FHDs. In conclusion, the maximum luminous efficiency of the suggested QFHD(D110) has reached about 38%, compared with suggested FHDs($\fallingdotseq$ 2.7 lm/W).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.391-394
• /
• 1999

Until now, there is no report for the relationship between the condition of addressing and the characteristics of surface discharge in ac-PDP. We have known that such these experiment was important to drive ac PDP Therefore, this paper deals with the probability of transfer and the character of luminance according to addressing voltage(Va) and blocking voltage(Vg) in addressing period and sustain voltage in sustaining period and we use waveform according to ADS(Address and Display period Separation) method

• Journal of Information Display
• /
• v.2 no.4
• /
• pp.52-56
• /
• 2001

This paper presents the effects of the phosphor layer morphology related to the discharge volume on the discharge and radiation characteristics of the Red, Green, and Blue cells in an AC-PDP. As the thickness of the phosphor layer increases and the corresponding discharge volume in the cells decreases, the voltage margin decreases due to an increase in the sustain voltage. In contrast, the IR(Infrared) emission, discharge current, and luminance characteristics remain almost unchanged, regardless of any changes in the phosphor layer morphology.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.9
• /
• pp.750-757
• /
• 2002

A new lateral trench LTEIGBT with p+ diverter was proposed to suppress latch-up of LTIGBT The p+ diverter was placed between the anode and cathode electrode. The latch-up of LTEICBT with a p+ diverter was effectively suppressed to sustain an anode voltage of 8.7V and a current density of 1453A/$\textrm{cm}^2$ while in the conventional LTIGBT, latch-up occured at an anode current density of 540A/$\textrm{cm}^2$. In addition, the forward blocking voltage of the proposed LTEIGBT with a p+ diverter was about 140V. The forward blocking voltage of the conventional LTIGBT of the same size was no more than 105V, We fabricated the proposed LTEIGBT with a p+ diverter after the device and process simulation was finished. When the gate voltage is applied 12V, the forward conduction currents of the proposed LTEIGBT with a p+ diverter and the conventional LIGBT are 90㎃ and 70㎃, respectively, at the same breakdown voltage of 150V.