• The Korean Journal of Physiology and Pharmacology
• /
• 제10권4호
• /
• pp.193-198
• /
• 2006

Many gastrointestinal muscles show electrical oscillation, so-called 'slow wave', originated from interstitial cells of Cajal (ICCs). Thus, a technique to freshly isolate the cells is indispensable to explore the electrophysiological properties of the ICCs. To apply an enzyme solution on the serosal surface for cell isolation, the intestine was inverted and 0.02% trypsin solution and 0.04% collagenase solution were applied to serosal cavity. After the enzyme treatment, mucosal layer was removed and longitudinal muscle layer was gently separated from the rest of tissue. The thin layer was stretched in the recording chamber and mounted on an inverted microscope. Using ${\beta}-escine$, perforated whole cell patch clamp technique was used. Under a microscope, the tissue showed smooth muscle cells and interstitial cells around the myenteric plexus. Under voltage clamp condition, three types of membrane potential were recorded. One group of interstitial cells, which were positive to methylene blue and CD34, showed spontaneous outward current. These cells had bipolar shape and were considered as fibroblast-like cells because of their peculiar shape and arrangement. Another group, positive to c-kit and methylene blue, showed spontaneous inward current. These cells had more rounded shape and processes and were considered as ICCs. The third, positive to c-kit and had granules containing methylene blue, showed quiet membrane potentials under the voltage-clamp mode. These cells appeared to be resident macrophages. Therefore, in the freshly isolated thin tissue preparation, methylene blue could easily identify three types of cells rather than morphological properties. Using this method, we were able to study electrical properties of fibroblast and residential macrophage as well as myenteric ICCs.

• 한국자기학회지
• /
• 제15권4호
• /
• pp.217-220
• /
• 2005

제일원리적 에너지 띠 계산 방법인 전 전자 총 퍼텐셜 선형보강평면파동(all-electron full-potential linearized augmented plane ave) 방법에 일반기울기근사(generalized gradient approximation)를 채용하여 Ag(001) 표면 위에 [110] 방향으로 놓인 Fe 선의 전자구조와 자성을 이론적으로 연구하였다. Fe 선의 원자당 자기모멘트는 $3.02\;{\mu}_B$로 Cu(001) 위에 놓인 Fe[110] 선의 값($2.99\;{\mu}_B$) 보다 약간 컸다. Fe 선의 자기모멘트가 상당히 증가한 것은 이웃한 결합수가 줄어들고 그 결과로 Fe-d 전자상태의 띠폭이 줄어들어 국소화 되고 스핀분리가 증가하였기 때문이다. Fe-d 전자상태의 띠 폭은 약 1.6eV였으며 스핀분리는 약 3.2 eV였다.

• Journal of Magnetics
• /
• 제20권3호
• /
• pp.229-240
• /
• 2015

In this study, nanocrystalline ferrite powders with the composition $Ni_{0.5}Zn_{0.5}Fe_2O_4$ were prepared by the autocombustion method. The obtained powders were sintered at $800^{\circ}C$, $900^{\circ}C$ and $1,000^{\circ}C$ for 4 h in air atmosphere. The as-prepared and the sintered powders were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and magnetization studies. An increase in the crystallite size and a slight decrease in the lattice constant with sintering temperature were observed, whereas microstrain was observed to be negative for all the samples. Two significant absorption bands in the wave number range of the $400cm^{-1}$ to $600cm^{-1}$ have been observed in the FT-IR spectra for all samples which is the distinctive feature of the spinel ferrites. The force constants were found to vary with sintering temperature, suggesting a cation redistribution and modification in the unit cell of the spinel. The M-H loops indicate smaller coercivity, which is the typical nature of the soft ferrites. The observed variation in the saturation magnetization and coercivity with sintering temperature has been attributed to the role of surface, inhomogeneous cation distribution, and increase in the crystallite size.

• 한국전자파학회논문지
• /
• 제11권3호
• /
• pp.388-402
• /
• 2000

주기적인 구형격자를 갖는 유전체 코팅된 도체 실린더에 대해 무한 주기 구조와 유한 주기 구조에 대한 누설 파 안테나의 복사 특성을 이론적으로 해석하였다. 무한 주기 구조에 대하여는 모드 정합 법을 적용하여 해석하 였고, 유한 주기 구조에 대하여는 퓨리에 변환과 모드 전개를 사용하여 적분 방정식을 유도하고 선형 연립 방정 식을 얻는다. 구형격자의 폭, 깊이, 유전체 코팅두께, 도체 실린더의 반경, 유한 구형격자 개수의 영향이 위상 상 수, 누설 상수 및 복사패턴 등과 복사 특성에 미치는 영향을 조사하였고, 유한 주기 구조와 무한 주기 구조의 결 과를 비교하고 잘 일치함을 확인할 수 있었다. 균일 유한 주기 구형격자에 의한 높은 측엽을 줄이기 위해 안테나 의 전후단 부에 테이퍼링과 비균일 준주기 슬롯배열을 고려하였다. 또한 구형격자 표면파 안테나에 사용되는 구 형격자 주기. 폭, 깊이에 대해 테이퍼링을 통해 낮은 측엽을 갖는 endfire 복사패턴을 얻을 수 있었다.

• 한국환경과학회지
• /
• 제19권3호
• /
• pp.379-387
• /
• 2010

Sediments of Little Scioto (LS) River in Ohio was contaminated by poor disposal of creosote from Baker Wood Creosoting Facility. Among the primary compounds of creosote, Polycyclic Aromatic Hydrocarbons (PAHs) are the most common ingredient PAHs are known for toxic, carcinogenic and mutagenic compounds. There are many difficulties to remove the PAHs in nature environment because their characteristics are having a less water-solubility, volatile and low mobility properties as increasing the molecular weight. The generation of hydroxyl radicals (${\cdot}OH$) and hydrogen peroxide ($H_2O_2$) forms as well as high temperature (5000 K) and pressure (1000 atm) by a physico-chemical effects of ultrasound during a cavitation collapse can promote the degradation and desorption of PAHs in sediment And it can also produces shock wave and microjets which are able to change the size and surface of particle in solid-liquid system as one of physical effects. Therefore, we explored to understand the role of particle size, the effect of elimination for PAHs concentration by ultrasound and optimize the conditions for ultrasonic treatment. The condition of various size of particles (> $150{\mu}m$, < $150{\mu}m$) and solid-liquid ratio (12.5g/L, 25g/L) for the treatment was considered and ultrasonic power (430 W/L) with liquid - hexane extraction and microwave extraction method were applied after ultrasound treatment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.2004-2006
• /
• 1996

A thermally driven polysilicon micro actuator has been fabricated using surface micromachining techniques. It consists of P-doped polysilicon as a structural layer and TEOS (tetracthylorthosilicate) as a sacrificial layer. The polysilicon was annealed for the relaxation of residual stress which is the main cause to its deformation such as bending and buckling. And the newly developed HF VPE (vapor phase etching) process was also used as an effective release method for the elimination of sacrificial TEOS layer. The thickneas of polysilicon is $2{\mu}m$ and the lengths of active and passive polysilicon cantilevers are $500{\mu}m$ and $260{\mu}m$, respectively. The actuation is incurred by die thermal expansion due to the current flow in the active polysilicon cantilever, which motion is amplified by lever mechanism. The moving distance of polysilicon micro actuator was experimentally conformed as large as $21{\mu}m$ at the input voltage level of 10V and 50Hz square wave. The actuating characteristics are investigated by simulating the phenomena of heat transfer and thermal expansion in the polysilicon layer. The displacement of actuator is analyzed to be proportional to the square of input voltage. These micro actuator technology can be utilized for the fabrication of MEMS (microelectromechanical system) such as micro relay, which requires large displacement or contact force but relatively slow response.

• 한국항해항만학회지
• /
• 제38권6호
• /
• pp.585-591
• /
• 2014

본 논문의 주 목적은 프루드 수가 0.5 이상인 중형 경비정의 속도성능을 모형시험 이전에 CFD 결과를 바탕으로 기존의 모형시험자료를 활용하였다. 모형시험 이전에 CFD를 이용하여 선속 별로 추정된 제동마력이 주어진 엔진마력을 만족하는지를 평가 하였다. 대상선박은 선미가 서로 다른 두 가지 선형을 선정하였다. 점성 유동장 계산은 상용 CFD 코드인 STAR-CCM+를 사용하였으며, 자유수면과 자세 변화(동적 트림)를 모두 고려하였다. 알몸 선체의 저항 값은 CFD를 이용하여 추정되었다. 점성 유동 해석을 통해 두 가지 선형의 자유수면 파형, 압력분포, 한계유선 그리고 프로펠러 면에서의 속도분포를 비교하였다. 점성 유동 해석 결과를 바탕으로 두 가지 선형에 대한 유효마력 즉, 저항성능을 평가하였다. 부가물 부착에 따른 저항 증가량과 준추진효율 계수(ETAD, ${\eta}_D$)는 모형시험 자료를 활용하였다. 중형 경비정과 같은 고속선박에 관한 속도성능 추정법이 CFD와 기존 시험자료를 이용하여 개발되었다.

• 폴리머
• /
• 제24권6호
• /
• pp.860-868
• /
• 2000

본 연구에서는 섬유등급, 배향각 및 적층방법을 달리하여 제조한 탄소섬유강화 복합재료의 제조변수에 따른 전자파 차폐 특성에 관하여 고찰하였다. 그 결과, 탄소섬유강화 복합재료의 전자파 차폐효과는 섬유의 배향각도에 크게 좌우되었다. 특히 0$^{\circ}$의 배향각에서는 섬유의 등급에 따른 영향을 나타내었으며, 동일한 탄소섬유라 할지라도 배열방향에 따른 전기적 성질의 변화, 즉 전기적 이방성이 클수록 차폐효과는 커졌다. 각각의 적층방법에 따라 제조된 모든 시편은 83~98%의 차폐효과를 나타내었으나, 대칭구조와 비대칭구조에서는 적층각도가 커짐에 따라 차폐효과가 소폭 감소하였다. 그러나 반복구조에서는 위의 두 가지 구조와는 다른 경향을 나타내었으며, 특히 90$^{\circ}$ 반복구조의 경우 측정 주파수 전 영역에 걸쳐 90% 이상의 차폐력을 나타내었다.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.7189-7195
• /
• 2015

모멘트법(MoM)인 TE(transversw electric) 전장 적분 방정식(EFIE)으로 완전 전기도체(PEC) 원통을 산란 해석하였다. 이 과정에서 나타나는 특이점(singlarity)과 과대 특이점(hypersingularity)을 포함한 적분 계산은 어렵기 때문에 수치해석 방법으로 특이점을 고립시켜 자체항(self-term)을 얻었다. 모멘트법에서 base 함수와 test 함수의 선택은 수치해석 결과의 정확도와 수렴에 있어 매우 중요한 요인이됨은 알려져 있는 사실이다. basis 함수와 test함수를 달리하여 세 가지 방법으로 PEC 원통에 유도된 전류를 구하였다. 이렇게 구한 결과를 해석학적 방법과 모멘트법에서 얻은 전류와 비교하여 상대 효율 전류 오차를 구하였으며 어떤 결합 방법이 효율적인지 확인하였다. 또한 각 결합방법에 따른 상대 효율 전류 오차의 수렴율을 구하여 가장 정확한 결과를 얻을 조건을 찾았다. 전류 오차의 가장 빠른 수렴오더(order of convergence) 2.528은 펄스 base 함수/델타 test 함수 결함 조건에서 얻었다.

• Restorative Dentistry and Endodontics
• /
• 제15권2호
• /
• pp.17-33
• /
• 1990

The purpose of this study was to evaluate the fracture toughness of dental composite resins and to investigate the filler factor affecting the fracture behaviour on which the degree of fracture toughness depends. Six kinds of commercially available composite resin;, including two of each macrofilled, microfilled, and hybrid type were used for this study, The plane strain fracture toughness ($K_{10}$) was determined by three-point bending test using the single edge notch specimen according to the ASTM-E399. The specimens were fabricated with visible light curing or self curing of each composite resin previously inserted into a metal mold, and three-point bending test was conducted with cross-head speed of 0.1mm/min following a day's storage of the specimens in $37^{\circ}C$ distilled water. The filler volume fractions were determined by the standard ashing test according to the ISO-4049. Acoustic Emission(AE), a nondestructive testing method detecting the elastic wave released from the localized sources In material under a certain stress, was detected during three-point bending test and its analyzed data was compared with, canning electron fractographs of each specimen. The results were as follows : 1. The filler content of composite resin material was found to be highest in the hybrid type followed by the macrofilled type, and the microfilled type. 2. It was found that the value of plane strain fracture toughness of composite resin material was in the range from 0.69 MPa$\sqrt{m}$ to 1 46 MPa$\sqrt{m}$ and highest In the macrofilled type followed by the hybrid type, and the microfilled type. 3. The consequence of Acoustic Emission analysis revealed that the plane strain fracture toughness increased according as the count of Acoustic Emission events increased. 4. The higher the plane strain fracture toughness became, the higher degree of surface roughness and irregularity the fractographs demonstrated.