A STUDY ON THE FRACTURE TOUGHNESS OF DENTAL COMPOSITE RESINS

치과용 복합레진의 파괴인성에 관한 실험적 연구

  • Park, Jin-Hoon (Department of Conservative Dentistry, College of Dentistry, Kyung Hee University) ;
  • Min, Byung-Soon (Department of Conservative Dentistry, College of Dentistry, Kyung Hee University) ;
  • Choi, Ho-Young (Department of Conservative Dentistry, College of Dentistry, Kyung Hee University) ;
  • Park, Sang-Jin (Department of Conservative Dentistry, College of Dentistry, Kyung Hee University)
  • 박진훈 (경희대학교 치과대학 보존학 교실) ;
  • 민병순 (경희대학교 치과대학 보존학 교실) ;
  • 최호영 (경희대학교 치과대학 보존학 교실) ;
  • 박상진 (경희대학교 치과대학 보존학 교실)
  • Published : 1990.10.25

Abstract

The purpose of this study was to evaluate the fracture toughness of dental composite resins and to investigate the filler factor affecting the fracture behaviour on which the degree of fracture toughness depends. Six kinds of commercially available composite resin;, including two of each macrofilled, microfilled, and hybrid type were used for this study, The plane strain fracture toughness ($K_{10}$) was determined by three-point bending test using the single edge notch specimen according to the ASTM-E399. The specimens were fabricated with visible light curing or self curing of each composite resin previously inserted into a metal mold, and three-point bending test was conducted with cross-head speed of 0.1mm/min following a day's storage of the specimens in $37^{\circ}C$ distilled water. The filler volume fractions were determined by the standard ashing test according to the ISO-4049. Acoustic Emission(AE), a nondestructive testing method detecting the elastic wave released from the localized sources In material under a certain stress, was detected during three-point bending test and its analyzed data was compared with, canning electron fractographs of each specimen. The results were as follows : 1. The filler content of composite resin material was found to be highest in the hybrid type followed by the macrofilled type, and the microfilled type. 2. It was found that the value of plane strain fracture toughness of composite resin material was in the range from 0.69 MPa$\sqrt{m}$ to 1 46 MPa$\sqrt{m}$ and highest In the macrofilled type followed by the hybrid type, and the microfilled type. 3. The consequence of Acoustic Emission analysis revealed that the plane strain fracture toughness increased according as the count of Acoustic Emission events increased. 4. The higher the plane strain fracture toughness became, the higher degree of surface roughness and irregularity the fractographs demonstrated.

Keywords