• 한국진공학회지
• /
• 제5권1호
• /
• pp.77-84
• /
• 1996

Silicon deposition by Penning discharge was carried out using a mixture of 5% $SiH_4/H_2$ and Ar gas, and the effects of the deposition conditions(gas mixing raito, substrate temperature. discharge power etc.) on the growth rate, crystallinity and morphology of the films deposited were investigated. The magnetic field(800 G) confined the plasma in the region between the two cathodes and enhanced the discharge current by a factor of a few hundreds below 1 mTorr. The magnetic field-enhanced plasma density resulted in a very large deposition rate of about 300 $\AA$/min at $SiH_4$ flow rate of 0.7 sccm and the substrate temperature of $800^{\circ}C$. Characterization of the films by Raman spectroscopy, X-ray diffraction, and scanning electron microscopy revealed that an epitaxial film with a smooth surface grows above 80$0^{\circ}C$, an amorphous film below $400^{\circ}C$, and a rough polycrystalline film at intermediate temperatures.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.433-433
• /
• 2013

Graphene, $sp^2$-hybridized 2-Dimension carbon material, has drawn enormous attention due to its desirable performance of excellent properties. Graphene can be applied for many electronic devices such as field-effect transistors (FETs), touch screen, solar cells. Furthermore, indium tin oxide (ITO) is commercially used and sets the standard for transparent electrode. However, ITO has certain limitations, such as increasing cost due to indium scarcity, instability in acid and basic environments, high surface roughness and brittle. Due to those reasons, graphene will be a perfect substitute as a transparent electrode. We report the graphene synthesized by inductive coupled plasma enhanced chemical vapor deposition (ICP-PECVD) process on Cu substrate. The growth was carried out using low temperature at $400^{\circ}C$ rather than typical chemical vapor deposition (CVD) process at $1,000^{\circ}C$ The low-temperature process has advantage of low cost and also low melting point materials will be available to synthesize graphene as substrate, but the drawback is low quality. To improve the quality, the factor affect the quality of graphene was be investigated by changing the plasma power, the flow rate of precursors, the scenario of precursors. Then, graphene film's quality was investigated with Raman spectroscopy and sheet resistance and optical emission spectroscopy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2154-2159
• /
• 2007

The potential of using a double-faced wall stagnation flow burner in mass production of carbon nanotubes was evaluated experimentally and computationally. With nitrogen-diluted premixed ethylene-air flames established on the Nickel-coated stainless steel double-faced wall, the propensities of carbon nanotube formation were experimentally determined using SEM and FE-TEM images and Raman spectroscopy, while the flame structure was computationally predicted using a 3-dimensional CFD code with a reduced reaction mechanism. The uniformity and yields of synthesized carbon nanotubes were evaluated in terms of the flame stretch rates. Results show substantial increase of area on the wall surface where uniform carbon nanotubes are synthesized with using the double-faced wall stagnation flow burner due to enhanced uniformity of temperature distribution along the wall surface and support the potential of using a double-faced wall stagnation flow burner in mass production of carbon nanotubes.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.305-305
• /
• 2015

알루미늄 방열판 위에 MPCVD(Microwave Plasma Enhanced Chemical Vapor Deposition) 장치를 이용하여 DC 바이어스 전압을 기판에 인가하면서 $Ar+CH_4$ 가스 분위기에서 증착한 나노결정질 다이아몬드(Nanocrystalline Diamond; NCD) 박막의 방열 특성을 평가하였다. XRD와 Raman spectroscopy를 이용하여 증착된 박막이 NCD인지를 확인하였으며 FE-SEM 및 FIB로 박막의 표면 및 단면의 형상을 관찰하였다. 다이아몬드가 증착된 방열판에 LED를 부착하여 발열시키고 열유동측정기의 하나인 T3-ster를 사용하여 방열 특성을 분석하였다. 기존 알루미늄(Al) 기판(5.55 K/W)보다 다이아몬드 증착(Dia-Al) 기판(3.88 K/W)의 열저항 값이 현저히 작았다, 또한 LED 접합온도는 Dia-Al 기판이 Al 기판보다 약 $3.5^{\circ}C$만큼 낮았다. 적외선 열화상 카메라로 발열 중인 시편의 전면과 후면을 촬영한 결과, LED가 부착된 전면부에서는 최고 발열 부위(hot spot)의 면적이 Al 기판의 경우가 Dia-Al 기판보다 높았고, 후면부에서는 그 반대의 경향을 보였다. 이들 데이터로부터 다이아몬드 증착 방열판이 기존의 방열판보다 방열특성이 우수한 것으로 해석할 수 있으며, 다이아몬드 박막을 방열판으로 사용하면 LED의 사용 수명과 효율이 높아질 것으로 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.519-523
• /
• 2000

Using plasma-enhanced chemical vapor deposition (PECVD), carbon thin film as electron field emitter were fabricated. These carbon thin film were deposited on Si(100) substrate at several RF power. These film were estimated by raman spectroscopy, scanning electron microscopy, and field emission. The field electron emission property of these carbon thin film was estimated by a diode technique. As the result, we observed that the field emission properties of these films were promoted by higher RF power. These results are explained as change of surface morphology and structural properties of carbon thin film

• 대한화학회지
• /
• 제47권5호
• /
• pp.439-446
• /
• 2003

Au와 Ag 콜로이드 단일막 표면위에 흡착된 4-biphenylcarboxylic acid(BPCA)의 유도체인 4''-cyano-BPCA(c-BPCA), 4''-mercapto-BPCA(m-BPCA), 그리고 4''-amino-BPCA(a-BPCA)가 어떠한 배향을 하는지 알아보기 위해 표면증강라만(SER)분광법을 이용하여 연구하였다. 체계적인 분석을 위해 benzoic acid, biphenyl, 그리고 BPCA의 분자 배향에 대한 정보를 기본으로 위 분자들에 대한 흡착정보를 유추해내었다. 배향에 대한 정보를 위해 벤젠고리 모드, C-H 신축진동모드, carboxylate 음이온의 신축진동모드, 그리고 각각의 주요 작용기에 해당되는 모드들의 거동변화를 살펴보았으며 이로부터 m-BPCA는 thiol 그룹이 금속에 흡착되고 biphenyl 그룹이 기울어 서 있는 형태를 취하고 있고 나머지 분자들은 금속표면에 편평한 형태로 흡착됨을 알아내었다.

• 한국전기전자재료학회논문지
• /
• 제19권8호
• /
• pp.701-706
• /
• 2006

In addition to its similarity to genuine diamond film, diamond-like carbon (DLC) film has many advantages, including its wide band gap and variable refractive index. In this study, DLC films were prepared by the RF PECVD (Plasma Enhanced Chemical Vapor Deposition) method on silicon substrates using methane $(CH_4)$ and hydrogen $(H_2)$ gas. We examined the effects of the post annealing temperature on the structural variation of the DLC films. The films were annealed at temperatures ranging from 300 to $900^{\circ}C$ in steps of $200^{\circ}C$ using RTA equipment in nitrogen ambient. The thickness of the film and interface between film and substrate were observed by surface profiler, field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), respectively. Raman and X-ray photoelectron spectroscopy (XPS) analysis showed that DLC films were graphitized ($I_D/I_G$, G-peak position and $sp^2/sp^3$ increased) ratio at higher annealing temperature. The variation of surface as a function of annealing treatment was verified by a AFM and contact angle method.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.394-400
• /
• 2018

Purpose: This research evaluated five types of nanoparticles to develop a surface-enhanced Raman spectroscopy (SERS) method for the rapid detection of two Bacillus species (Bacillus cereus and Bacillus thuringiensis) that are commonly found on fresh produce, which can cause food poisoning. Methods: Bacterial concentrations were adjusted to a constant turbidity, and a total of $30{\mu}L$ of each Bacillus cell suspension was prepared for each nanoparticle. A point-scan Raman system with laser light source of wavelength 785 nm was used to obtain SERS data. Results: There was no qualitative difference in the SERS data of B. cereus and B. thuringiensis for any of the five nanoparticles. Three gold nanoparticles, stabilized in either citrate buffer or ethanol, showed subtle differences in Raman intensities of two Bacillus species at $877.7cm^{-1}$. Conclusions: Among the three types of nanoparticles, the gold nanoparticles stabilized in citrate buffer showed the lowest standard deviation, followed by gold nanoparticles stabilized in ethanol. This result supports the potential application of gold nanoparticles for SERS-based detection of B. cereus and B. thuringiensis.

• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.98-102
• /
• 2010

목련잎 추출액을 이용하여 Au core-Ag shell 합금 나노입자를 합성하였다. 환원제인 식물잎 추출액을 먼저 $HAuCl_4$ 용액과 반응시키고 다음에 $AgNO_3$ 용액과 반응시켜 금 seed와 은 shell을 형성시켰다. 반응시간에 따른 UV-visible spectroscopy의 변화를 모니터링하여 합금 나노입자의 형성을 관찰하였다. 합성된 합금 나노입자를 transmission electron microscopy(TEM), energy dispersive X-ray spectroscopy(EDS), X-ray photoelectron spectroscopy(XPS) 등으로 특성화 하였다. TEM image로부터 관찰된 합금 나노입자는 삼각형, 오각형, 육각형 등의 평판과 구 구조의 혼합물이었다. EDS와 XPS 분석으로부터 결정된 금/은 합금 나노입자의 원자 은 함량은 각각 34와 65 wt%로 Au core-Ag shell 나노구조가 형성되었음을 알 수 있었다. 이러한 core-shell 형태의 나노구조는 표면 강화 라만 분광 및 생물분자의 고감도 검출 등에 잠재적인 응용이 기대된다.

• 대한화학회지
• /
• 제47권5호
• /
• pp.533-538
• /
• 2003