• Journal of Environmental Science International
• /
• v.24 no.5
• /
• pp.633-639
• /
• 2015

The experience of natural dyeing is expected to be effective in promoting health through good exercise, in giving emotional stability based on the functional aromatic components of the dyeing material, and in improving self-esteem and increasing positive experiences through the behavior of creation. A natural dyeing material easily found around us, artemisia has long been used in food and Oriental medicine and was recently found to contain antioxidative, anticancer, deodorizing, antibacterial, anti-obesity, and anti-diabetes substances through chemical analysis. It has also been reported that group reminiscence therapy using the fragrance of artemisia is effective in relieving pain and depression and in promoting ego integrity in the elderly population. This study aimed to make a comparative analysis of dyeability, washing fastness, and deodorization between Artemisia princeps, Artemisia iwayomogi, and Artemisia annua, all of which are considered to be healthful and functional dyeing materials, among about thirty domestic plants in the genus of Artemisia and to provide basic data concerning natural dyeing in mind-peace education for the silver generation. The fabric dyed and post-mordanted at $80^{\circ}C$ for 40 minutes showed the greatest surface color variation; in this condition, artemisia princes (32.29) gave the greatest color difference, followed by artemisia iwayomogi (31.07) and artemisia annua (26.17). While all the types of artemisia were excellent in washing fastness, dry-cleaning fastness, and rubbing fastness at the fourth- or fifth-grade, light fastness was at the third grade for artemisia princes, at the second to third grade for artemisia annua, and at the second grade for artemisia iwayomogi; therefore, artemisia princes was found to give better fastness than the other two types of artemisia. In determining functionality of the fabric dyed with artemisia, deodorization test also found that the fabric dyed with artemisia princes had 20% higher deodorization.

• Resources Recycling
• /
• v.27 no.5
• /
• pp.23-29
• /
• 2018

Generally $NiSO_4$ and $NiCl_2$ were used as raw materials for producing nickel carbonate. In the case of the produced nickel carbonate, $Na_2SO_4$ and NaCl are generated on the surface and inside of the nickel carbonate to decrease the purity of the nickel carbonate. High purity nickel carbonate can be produced according to the degree of removal of such impurities. In this study, $NiCl_2$ produced by nickel MHP solvent extraction process was used to study the production of nickel carbonate. High purity nickel carbonate was prepared by the conditions according to the nickel salt and carbonate equivalence ratio, the reduction of Na and Cl in nickel carbonate according to the washing of nickel carbonate, and the reduction of Na and Cl according to the washing water temperature.

• Journal of the Korean Ceramic Society
• /
• v.36 no.5
• /
• pp.555-563
• /
• 1999

Impregnation of phosphorous additiers into graphite bulk was studied with the goal of enhancing the effectiveness of oxidationprotection. In addition graphite acid washing was carried out prior to the impregnation further to improve oxidation resistance. Observation of the oxidation rate for raw graphite(Raw) impregnated graphite with tri-butyl phsophate on raw block(RP) and impregnated graphite on acid-treated graphite(AP) in air are reported. The phsophorus residue adsorbed on the graphite surface at active sites was determined by FTIR, XRS, TGA techniques. AP with tri-butyl phosphate was found to result in both 30% reduction in oxidation rate at 1000$^{\circ}C$ compared to Raw and increase of 120$^{\circ}C$ in oxidation temperature From the samples of oxidation rate of each specimen in Arrhenius plot it can be said that the present oxidation resistance origninates from the change of chemical reaction modesw neigther by acid-washing treatment nor phsophate impregnation

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.739-744
• /
• 2011

Activated carbon SCR(CSCR) catalyst that is used to remove $NO_x$ in exhaust gas including boron discharged from the production process of liquid crystal display(LCD) shows deactivation when boron is deposited to block the pores within the catalyst or to cover its active sites. The spent carbon catalyst is regenerated by washing with various surfactants, drying and calcination. For comparison of the physical and chemical properties before and after the regeneration with the variables, type of surfactants and calcination condition, element analysis by ICP, $N_{2}$ adsorption were conducted. $DeNO_{x}$ in SCR with $NH_3$ was carried out in a fixed bed reactor at $120^{\circ}C$. The activated carbon catalyst regenerated through washing with a non-ionic surfactant in $H_{2}O$ at $90^{\circ}C$ and calcination under $N_{2}$ gas at $550^{\circ}C$ shows similar level of surface area and $NO_x$ removal efficiency with those of fresh catalyst.

• 보존과학연구
• /
• s.22
• /
• pp.133-154
• /
• 2001

Stone cultural properties, exposed in natural environment, is deteriorated by many weathering reasons for a long time. It is necessary to treat of consolidation and water-repellent on the surface because of the conservation of stone cultural properties. We was treated the specimen [granite(Hwangdung-suk), sandstone, marble(in JeongSeon)] by synthesis resin of DWR-Ⅲ, SI2121 and fluoropolymer, and tested on the durability, water-repellent, color stability and luster generation etc. In the result of this study, DWR-Ⅲ and fluoropolymer is superior to the waterrepellent, durability of salt and acid rain. SI2121 is superior to the penetration because of lower viscosity, but the water-repellent is inferior to the others. After the treatment of chemicals, the color-variation make an appearance but luster-generation doesn’t. With the passage of time, the color of specimen was got better because of the ‘washing’ phenomenon for ultra-violet, salt etc.

• International Journal of Safety
• /
• v.8 no.1
• /
• pp.18-23
• /
• 2009

Due to dermal exposure to hazardous chemicals causing potential adverse health symptoms through skin absorption, dermal monitoring has had an important role in assessing such exposure. This paper overviews comparatively a number of studies of dermal monitoring with different methodologies such as surface monitoring, skin wiping, skin washing, adhesive methods and tape stripping, fluorescence and infrared spectroscopy, skin patches, pads and clothing, video exposure monitoring and dermal exposure assessment toolkits and models. However, there is a lack of information on the relationship between exposure levels and adverse health symptoms. Therefore, more specific strategies for dermal exposure monitoring should be developed and standardized with further development of biological and ocular monitoring.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.23-30
• /
• 2006

The bending properties, wrinkle resistance, and fabric retention behaviors of cotton knitted fabrics in the wale and course directions were studied for their dependence upon resin finishing, knit structure, and washing cycles. Stiffness, wrinkle recovery angles, and dimensional stability were investigated before and after resin finishing and laundering. It has been found that any change in the physical properties of the knitted fabrics with respect to knit structure and fabric directions are related to accompanying modifications to the state of the fiber properties. The decrease of fabric shrinkage rates and wrinkle recovery properties from increasing laundering cycles is related with resin incorporated on the fiber surface. This study shows that resin finishing on knitted fabrics can be performed only to improve fabric retention properties with reduced wrinkle recovery properties.

• Textile Coloration and Finishing
• /
• v.15 no.1
• /
• pp.30-38
• /
• 2003

Research to dyeing properties of Ulmi cortex extract, silk and cotton fabrics were dyed and mordanted. Dyes were extracted from distilled water according to different pH values. The dyeability of Ulmi cortex extract were evaluated by conditions of dyeing temperature, dyeing time, dyeing pH, mordanting temperature, mordanting time, mordanting concentration and color fastness, etc. IR spectrum possessed absorption band of -OH at $3400cm^{-1},\;C-H\;at\; 2940cm^{ -1},\;aromatic\;C=C\;at\;1628cm^{-1},\;1518cm^{-1},\;C-O\;at\; 1107cm^{ -1},\;1043cm^{-1}$. And the $\labmda$max of extract appeared at 220nm and 280nm, so the substance of Ulmi cortex extract were catechin and tannin. Surface color of dyed fabrics were reddish yellow~yellow~greenish yellow. From the color fastness test, the fabrics dyed with PH 7 extract were excellent in irradiation and washing. Mordanting improved the color fastness and K/S value of dyed fabrics.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.322-325
• /
• 2003

Recently, as quality river aggregates like sands and gravels become scarce, use of crushed stones and sands, seashore sands, and seashore gravels is increasing abruptly. And, aggregates recycled from slags and waste concretes are used. However, since the converter slag easily expands and breaks due to free lime, differently from the blast-furnace slag, it is not suitable for use as concrete aggregates. Since the atomized steel slag aggregate has slippery surface and spherical shape, the mortar flowing characteristics improved as the atomized steel slag content increases, without regard to the aggregates coarseness and water/cement ratio. The flow characteristics loss rate of the mortar manufactured from steel slag aggregates was similar to that of the mortar manufactured from washed sand only. The compact strength of the mortar manufactured from coarse PS Ball were larger than that manufactured from washing sand only.

• Journal of the Korean Home Economics Association
• /
• v.32 no.1
• /
• pp.229-238
• /
• 1994

The purpose of this study was to investigate the objectification of coloring matter abstraction of the way to natural dye by cathamus flower. Watersoluble carthamin in the dyeing cathamus flower was removed for the fastness of dyeing and only insoluble carthamon was abstracted which came by solvent such as Sodium hydroxide(NaOH) Potassium hydroxide(KOH) Sodium carbonate(Na2CO3)and Potassi-um carbonate(K2CO3) Carthamon made abstract essence from a carthamus flower out of the pH6, pH7, pH9, pH11, solvent and by using a UV/VIS Spectra according to the change of pH. Silk dyes with solution abstract carthamon and it was treated by 5 kinds of mordant. The table of surface-colors was measured by the number of dyeing the color of silk dyed and by the kind of mordant which treated with and the dyeing was evaluated by measuring Color Fastness to Light and Washing.