• 제목/요약/키워드: surface slope

검색결과 1,404건 처리시간 0.032초

경사에 따른 화염각 변화와 지표 화염 확산에 관한 연구 - 무풍조건 기반 - (A Study on the Flame Tilt and Flame Spread due to Up-slope on the Surface Fuel Bed - No wind condition -)

  • 김동현
    • 한국방재학회 논문집
    • /
    • 제9권5호
    • /
    • pp.57-62
    • /
    • 2009
  • 경사면에서의 지표 연소물질에 대한 화염확산은 경사각변화에 따라 화염이 경사면과 가까워져 열전달이 많이 이루어져 확산이 빠르게 이루어진다. 기존 연구에서는 경사면에 대한 화염각 변화를 고려하지 않고 일반적으로 경사각의 기울어짐으로 인해 화염이 그 만큼 지표면과 가까워지는 것을 적용하였다. 따라서 본 연구에서는 경사면에서의 실제 화염의 성상에 대해 실험하였다. 그 결과 경사에 따른 화염기울기 산정식을 제안 하였고 경사조건에서의 화염기울기와 화염확산속도와의 관계에 대해 기술하였다.

사면붕괴가 발생된 절개사면에서의 억지말뚝 보강 사례연구 (A Case Study on the Reinforcement of Stabilizing Piles against Slope Failures in a Cut Slope)

  • 송영석
    • 지질공학
    • /
    • 제16권2호
    • /
    • pp.189-199
    • /
    • 2006
  • 본 논문은 도로공사시 발생된 붕괴사면을 대상으로 사면안정성을 검토하고, 불안정할 경우 합리적인 사면보강공법을 제안한 현장사례 연구이다. 사면조사결과 대상사면은 5개의 대규모 인장균열을 포함하고 있으며, 사면활동은 인장균열에서 시작하여 표토층과 풍화암층사이까지 발생된 것으로 판단된다. 사면안정해석은 건기시와 우기시에 대하여 각각 수행되었으며, 대상사면은 현재 불안정한 것으로 예측되었다. 사면보강공법은 사면의 파괴규모에 따라 선정하는 것이 바람직하다. 즉, 파괴규모에 따라 소규모파괴, 중규모파괴, 그리고 대규모파괴로 나누고 각각의 파괴규모에 따라 사면보강공법을 결정할 수 있다. 대상사면의 경우 대규모파괴에 해당하므로 사면보강공법은 안전율증가공으로 억지말뚝공을 채택하고, 안전을 유지공으로 식생공(Seed Spray) 및 지표수배제공을 채택할 수 있다. 억지말뚝으로 보강된 사면의 안정해석을 위하여 SLOPILE(Ver 3.0)프로그램을 적용하였다. 사면안정 해석결과 1열의 억지말뚝을 시공할 경우 안정한 것으로 나타났으며, 해석결과로부터 억지말뚝의 사면안정효과를 확인할 수 있다.

NUMERICAL SIMULATION OF TWO-DIMENSIONAL FREE-SURFACE FLOW AND WAVE TRANSFORMATION OVER CONSTANT-SLOPE BOTTOM TOPOGRAPHY

  • DIMAKOPOULOS AGGELOS S;DIMAS ATHANASSIOS A
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2005년도 학술발표회(2)
    • /
    • pp.842-845
    • /
    • 2005
  • A method for the numerical simulation of two-dimensional free-surface flow resulting from the propagation of regular gravity waves over topography with arbitrary bottom shape is presented. The method is based on the numerical solution of the Euler equations subject to the fully nonlinear free-surface boundary conditions and the appropriate bottom, inflow and outflow conditions using a hybrid finite-differences and spectral-method scheme. The formulation includes a boundary-fitted transformation, and is suitable for extension to incorporate large-eddy simulation (LES) and large-wave simulation (LWS) terms for turbulence and breaking wave modeling, respectively. Results are presented for the simulation of the free-surface flow over two different bottom topographies, with constant slope values of 1:10 and 1:20, two different inflow wave lengths and two different inflow wave heights. An absorption outflow zone is utilized and the results indicate minimum wave reflection from the outflow boundary. Over the bottom slope, lengths of waves in the linear regime are modified according to linear theory dispersion, while wave heights remain more or less unchanged. For waves in the nonlinear regime, wave lengths are becoming shorter, while the free surface elevation deviates from its initial sinusoidal shape.

  • PDF

100 W급 LED 보안 등기구용 비대칭 배광의 2차 렌즈 설계 (Secondary Optics Design of Dissymmetrical Light Distribution for 100 W LED Safety Luminaires)

  • 신익태;양종경;이동진;박대희
    • 한국전기전자재료학회논문지
    • /
    • 제23권6호
    • /
    • pp.471-476
    • /
    • 2010
  • This paper has studied dissymmetrical light distribution design using the secondary optics in the simulation. fundamental Lambertian radiation distribution based on LED has been cut off by the secondary optics, and the first surface slope of lens and second surface slope of total reflection area have been calculated through formula. PMMA (the index of refraction: 1.49361) which is material of lens has been selected. critical angle($42.02993^{\circ}$) between Air and PMMA has been calulated by snell's law, and total reflection angle slope has been selected about $16.67^{\circ}$ to occur the total reflection. when the first surface slope and the second surface slope has been set up, Rays of all total reflection area have generated the total reflection. finally, designed LED Module has been estimated by Korean Industrial Standards for LED safety street lighting. dissymmetrical light distribution have been analyzed with reached effect of road illuminance, and average road illuminance which are each 70.6 lx, 40.35 lx, and 25.88 lx have been satisfied with Korean Industrial Standards for LED safety street lighting.

습윤상태를 고려한 불포화 토사사면의 불안정성 해석 (Instability Analysis of Unsaturated Soil Slope Considering Wet Condition)

  • 김용민;김재홍
    • 대한토목학회논문집
    • /
    • 제33권4호
    • /
    • pp.1489-1498
    • /
    • 2013
  • 본 연구에서는 불포화 사면에서 선행강우의 영향을 고려하고자 지반의 초기 포화도를 3가지(36, 51, 77%)로 설정하여 수리학적-역학적 동시 유한요소해석(monolithically coupled finite element analysis)을 수행하였다. 선행강우에 의한 불포화 사면의 불안정성은 사면 내 모관흡수력 분포와 사면표층의 변위를 통하여 확인할 수 있다. 또한 Drucker-Prager model의 항복경계기준(trial failure criterion)을 적용하여 강우 침투에 의한 불포화 사면의 탄성 및 소성거동을 파악하였다. 그 결과, 선행강우에 의한 지반의 초기 포화도가 클수록 강우에 의한 변위가 크게 발생하며 모관흡수력 또한 감소한다. 특히, 모관흡수력은 지반이 건조할수록 빠르게 감소하며, 초기에 동일한 모관흡수력을 갖는 사면표층에서 포화도가 작은 지반일수록 더 빠른 모관흡수력 감소를 보였다. 풍화토의 탄성과 소성거동을 구분하기 위해 사용된 Drucker-Prager model을 통해 사면 파괴가 시작되는 항복경계지점을 확인 할 수 있었다.

태백산맥 남부산지의 암설사면지형 (The Study on the Debris Slope Landform in the Southern Taebaek Mountains)

  • 전영귄
    • 대한지리학회지
    • /
    • 제28권2호
    • /
    • pp.77-98
    • /
    • 1993
  • 본 연구는 암설사면지형이 잘 발달하고 다양하게 분포하는 태백산맥의 남부산지를 대상으로 항공 사진판독과 도상계측 및 현지조사를 통하여 노출암설사면의 분포, 형태 및 퇴적물의 특성을 분석하고 사면의 지형적 배열과 지형발달에 관해서 연구한 논문으로써 분포적 특성에 있어서는 애추의 경우 기반암이 경암이거나 절리가 잘 발달된 지질에서, 암괴류의 경우는 화강섬록암 지질에서 높은 분포밀도를 보였다. 형태적 특성은 애추, 암괴류 모두 설상이 각각 83${\%}$, 80${\%}로 가장 많았으며 지형면의 경사도에 있어서는 애추가, 길이에 있어서는 암괴류가 각각 우세했다. 퇴적물의 특성중 암설의 평균입경은 암괴류가 보다 크게 나타났다. 한 지형면에서 암설의 장축방향성의 경우 방향성 있는 경우와 없는 경우가 있는데, 후자는 지형면상의 함몰로 그 방향성이 상실된 것으로 보인다. 끝으로 지형발달의 경우, 애추는 암석낙하(rock fall)에 의한 형성기(최종빙기)와 2차적인 영역에 의한 조정기(후빙기)로 암괴류는 암괴의 생성기(제3가 또는 제 4기의 간빙기), 암괴류의 형성기(최종빙기), 조정기(후빙기)로 구분할 수 있었다. 그리고 산지 사면의 배열유형은 6가지 유형으로 분류되었다.

  • PDF

도로절개면 환경에 관한 산성배수의 영향과 대책 (Effect of Acid Drainage and Countermeasure about Road Cut Slope Environment)

  • 김진환;이종현;구호본;박미선
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.481-484
    • /
    • 2003
  • Sulfide minerals contacted with air and water in coal seam cause oxidation reactions. This oxidation reactions make low pH of groundwater and surface water(Acid Drainage). The reddish brown precipitate collected from the cut slope of the study area was estimated using the X-Ray Diffractometer(XRD). XRD results show that the cut slope was affected by Acid Drainage. The cut slope exposured to Acid Drainage become weak about chemical weathering and defile the appearance of the road. Drainage facilities are very important in Cut Slope under Acid Drainage influence. Reactions between Coal seam and water cause chemical weathering and environmental problem. Therefore It is important to control the transfer paths of groundwater and surface water and to install water collecting facilities

  • PDF

사면안정의 확률론적 해석 (Probabilistic Analysis of the Stability of Soil Slopes)

  • 김영수
    • 대한토목학회논문집
    • /
    • 제8권3호
    • /
    • pp.85-90
    • /
    • 1988
  • 균질토 사면에서 파괴에 대한 확률론적모델이 제시되었다. 사면의 안전은 관례적인 안전을 보다는 파괴확률로써 측정된다. 사면파괴의 Safety Margin은 정규분포라 가정하였다. 어떤 균질한 흙층에 있어서 흙의 특성에 영향을 주는 불확실성의 원인은 본래의 공간적인 가변성, 불충분한 시료에서 오는 판단오차 그리고 실험오차등이 었다. 파괴면을 따라 존재하는 전단강도의 불확실성은 1차원 Random Field Madels로 표현되었다. 파괴aus의 양상은 대수나선 곡선을 따른다고 가정하였다. 파괴면과 그것을 따라 작용하는 힘의 통계적 특성을 유도하여 사면의 파괴확률을 계산하였다. 마지막으로 개발된 절차가 사면의 신뢰성 해석에 대한 하나의 예제 연구에 적용되었다.

  • PDF

굴곡 사면의 암반 활동 파괴 예측을 위한 평사 투영 해석 (Stereographic Analysis to Predict Rock Sliding Failure of Curved Slope)

  • 윤운상;김정환
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 봄 학술발표회 논문집
    • /
    • pp.457-464
    • /
    • 2000
  • Stereographic method is a general and basic method to analyse sliding failure potential of rock slope. Region of failure analysis using stereographic method extend to curved slope from straight slope in this paper, Curved slope is defined as the multi-face slope with free surface more than two face and has different characteristics from straight single face slope. Individual daylight envelopes of free surfaces are combined into total daylight envelope of multi-face slope. So, sliding envelope of multi-face slope is the daylight envelope except friction cone. Specially, If only single joint set is developed in the slope, single plane sliding(or plane failure) is impossible in the single-face straight slope, but possible in the multi-face slope. In the multi-face slope with only one joint set, single plane sliding occurs when orientation of sliding plane is between two side slope orientation in the sliding envelope.

  • PDF

Effect of the Bottom Slope on the Formation of Coastal Front and Shallow-Sea Structure during Cold-Air Outbreak

  • Cheong, Hyeong-Bin;Kim, Young-Seup;Hong, Sung-Keun;Cheong, Hyeong-Bin
    • Journal of the korean society of oceanography
    • /
    • 제32권3호
    • /
    • pp.93-102
    • /
    • 1997
  • Coastal circulations during the (surface condition of an) idealized cold-air outbreak are numerically investigated with two-dimensional, non-hydrostatic model in which a constant bottom-slope exists. The atmospheric forcing during a cold-air outbreak is incorporated as the surface cooling and the wind stress. When the offshore angle of the wind-stress vector, defined as the angle measured from the alongshore axis, is smaller than 45 degrees, a strong downwelling circulation develops near the coast. A sharp density front, which separates the vertically homogeneous region from the offshore stratified region, is formed near the coast and propagates offshore with time. Onshore side of the density front, small-scale circulation cells which are aligned in the direction perpendicular to the bottom begin to develop as the near-coast homogeneous region broadens. The surface cooling enhances greatly the development of the surface mixed layer by convective motions due to hydrostatic instability. The convective motions reach far below the hydrostatically unstable layer which is attached to the surface. The small-scale circulation cells are appreciably modified by the convetion cell and the density front develops far offshore compared to the case of no surface cooling. As to the effect of the bottom slope, the offshore distance of the density front increases (decreases) as the bottom slope decreases (increases), which results from the fact that the onshore volume-transport (Ekman transport) of the low-density upper seawater remains almost constant when the wind-stress is maintained constant. It is shown that the bottom slope is an essential factor for the formation of both the density front and the alongshore current when the surface cooling is the only forcing.

  • PDF