• 한국지반공학회논문집
• /
• 제35권11호
• /
• pp.63-74
• /
• 2019

동적원심모형 시험 결과를 기준으로 액상화모델과 응답이력해석 절차에 대한 검증을 시행하였다. 사용된 동적원심모형시험 결과는 LEAP-2017(Liquefaction Experiments Analysis Project)의 일환으로 시행된 결과이다. 시험을 위한 모형지반은 오타와 F-65모래를 이용하여 강성토조 내부 수면아래 상대밀도 55%, 표면경사 5°로 조성되었다. 진폭이 변화하는 주파수 1Hz 사인파형 입력운동을 강성토조 하단에 가진하였다. 수치해석은 원심모형시험의 원형스케일에 대해서 2차원 유한차분 해석기법을 이용하여 수행되었다. 지반은 전단파괴 이전 이력감쇠를 나타내며 전단 파괴기준은 Mohr-Coulomb 모델을 따르도록 모델링 되었다. 정적평형 후 반복하중으로 인한 간극수압의 변화를 묘사하기 위하여 Byrne의 액상화 모델을 적용하였다. 액상화 해석에 적합한 흐름조건을 확인을 위하여 수치해석은 배수 및 비배수 조건으로 시행하였으며, 비배수 해석조건에서 시행된 수치해석결과가 원심모형시험과 유사한 결과를 제시함을 알 수 있었다.

• Journal of Biosystems Engineering
• /
• 제35권3호
• /
• pp.163-168
• /
• 2010

With income growth and "well-being" trends, sales of corn has been increased recently. Corns are processed at processing facilities on the main production site. Corn processing steps include removing bract, steaming, vacuum packing, and storing. To replace manual corn bract removing, some bract removing machines were imported and used. However, the machines were abandoned shortly, because of high damaging ratio of corns. In this research, factors of successful bract removing was studied with rotating rollers and air-injection nozzles to develop corn bract removing system. The test device was composed of a cylindrical roller, an air spray nozzle, a regulator, and a motor. Designing factors were roller type, diameter of air spraying nozzle, spraying angle, and spraying pressure. The measured factors were bract removing rate and damaging rate. It was found that optimum cylindrical roller surface shape was cylindrical roller and linear grove roller. This roller shape produced lowest damaging rate. Test results of the efficacy of preprocessing showed that the air spraying after preprocessing produced highest performance. The rotational speed and inclination of the roller didn't affect the bract removing performance. Optimum injection angle of the air jet nozzle was $70^{\circ}$. To increase bract removing rate and to reduce corn damage, required injection pressure and injection nozzle diameter were decided to less than 0.4 MPa and 2.5 mm, respectively. More than 3 times of nozzle passing produced good bract removing performance and there were no significant difference between the number of passing times.

• The Korean Journal of Ecology
• /
• 제15권2호
• /
• pp.103-115
• /
• 1992

This dissertation, which has been prepared in the region of cheju(33o31'N, 126o32'E) from may,1987 to appril, 1989, is to elucidate the dominant characteristics of early stages in secondary succession, by examining the life history of erigeron annuus for the seeding depth of a seed was dependent upon the degree of shading. That is, on the area of ocm,the more tense the shading was, the more germination percentage was increased, while, in the case of 1.5cm, it was somewhat increased, when shading bwcame ess and less tense. The rosette of e. annuus, through its relative light intensity was decreased by shading, up to 5% of natural light, showed some strong shade tolerance, which had no difficulty in matter production. The species diversity of mixed-species community was the highest in the middle of April, the lowest in the last of may. The dominance index was the highest in the late may, the lowest in the middle of April. Toward the end of may, the occupation rate of dominance species was the highest. There was a neutral relationship between intraspecific and interspecific, owing to the differentiation of its niche, temporally and spatially. Productive structure of the community revealed a narrow leaf type which was concentratively distributed in the mid part of community height. The relative light intensity of community ground surface was 6.1%, the leaf inclination 60o,the extinction coefficient(k) 0.4, biomass of community 1,045.6 g.d.w./m2,T/Rratio 9.3, C/Frate 7.0 and sumgermanition, shade toarance and community characteristics on erigeron annuus l.in chejumed leaf area index 3.88. through the various life cycles o e.annuus, we can say that it decreases mortality of seeding caused by some stress and disturbance, for germination lasts for a long time at any opportunity available, and it promotes population growth. The strong shade tolerance of a rosette and the variableness of a life from differentiate the niche between intraspecific and interspecific within the community, and avoid the direct competition between them, thus poromoting community growth.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2005년도 한국우주과학회보 제14권1호
• /
• pp.129-132
• /
• 2005

본 논문에서는 HAUSAT-2의 궤도 열 해석과 열 제어계의 예비설계를 살펴본다. HAUSAT-2의 열 제어계를 설계하기 위해서 우선 열 제어의 기본 이론 및 열 평형 방정식을 바탕으로 능동 및 수동의 각종 열 제어 방법을 고려하여 HAUSAT-2에 적합한 열 제어 방법 및 재질을 선정하였다(Karam 1998). 또한, 예상궤도인 고도 650km, 경사각 $98^{\circ}$의 태양동기궤도에서 HAUSAT-2가 처해지는 열 환경에 대한 분석 및 위성체의 각 면에 가해지는 은도 분포 및 범위를 예측하여 이를 바탕으로 열 제어계를 설계하였다. 열 해석은 기본적으로 시스템레벨의 해석, 부품레벨의 해석, 보드레벨의 해석 차순으로 진행되었으며, 현재 HAUSAT-2의 열 해석은 발열이 비교적 많은 보드의 해석까지 진행된 상태이며, 이러한 열 해석을 통해서 얻은 결과는 요구조건을 만족하지 못하는 부분에 대해 설계 변경 등을 통해서 모든 부품이 허용온도 범위를 유지하도록 HAUSAT-2의 열 제어계를 설계하였다. 향후 구조-열 모델(STM; Structure & Thermal Model)을 제작한 후 열 진공시험을 통해 열 해석 결과에 대한 검증을 수행할 것이다.

• 대한치과교정학회지
• /
• 제43권5호
• /
• pp.218-224
• /
• 2013

Objective: To examine the effect of bite force on the displacement and stress distribution of orthodontic mini-implants (OMIs) in the molar region according to placement site, insertion angle, and loading direction. Methods: Five finite element models were created using micro-computed tomography (microCT) images of the maxilla and mandible. OMIs were placed at one maxillary and two mandibular positions: between the maxillary second premolar and first molar, between the mandibular second premolar and first molar, and between the mandibular first and second molars. The OMIs were inserted at angles of $45^{\circ}$ and $90^{\circ}$ to the buccal surface of the cortical bone. A bite force of 25 kg was applied to the 10 occlusal contact points of the second premolar, first molar, and second molar. The loading directions were $0^{\circ}$, $5^{\circ}$, and $10^{\circ}$ to the long axis of the tooth. Results: With regard to placement site, the displacement and stress were greatest for the OMI placed between the mandibular first molar and second molar, and smallest for the OMI placed between the maxillary second premolar and first molar. In the mandibular molar region, the angled OMI showed slightly less displacement than the OMI placed at $90^{\circ}$. The maximum Von Mises stress increased with the inclination of the loading direction. Conclusions: These results suggest that placement of OMIs between the second premolar and first molar at $45^{\circ}$ to the cortical bone reduces the effect of bite force on OMIs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.43-45
• /
• 2009

In case of favourable irradiation conditions, the ratio of irradiation to the total irradiation went up and then the irradiation increased in the area with high angle of inclination. The study showed that on a clear day with the irradiation of more than 80$[W/m^2]$, the pattern of alternating current power change in the fixed system was similar with that in the single-axis tracker. On the contrary, in case of unfavourable irradiation conditions, the ratio of diffuse irradiation to the total irradiation went up and then the horizontal irradiation increased. In the demo system, the fixed system, the single-axis tracker and the dual-axis tracker all had low generation power and similar generation pattern with each other. The study showed the generation power varied with the irradiation in the fixed system, while in the single-axis tracker and the dual-axis tracker, the amount of the generation Power variation was much more than the irradiation variation. The demo system was operated from 11:00 AM to 2:00 PM for generating power, during which time, 46[%] to 56[%] of the total generation power was produced. In this study, the generation power was increased by 147[%] in the fixed system, by 136[%] in the single-axis tracker, and by 164[%] in the dual-axis tracker, and the pattern of generation power was similar with the generation power variation in the situation where the irradiation increased by 140[%] in the spring with plenty of insolation. The alternating current power was more sensitive to variation of the irradiation than to that of the surface temperature of a module. The variation of the irradiation had a more positive effect on the generation power than the type of array.

• 한국터널지하공간학회 논문집
• /
• 제8권1호
• /
• pp.21-30
• /
• 2006

도심지 터널은 미고결성 저토피고 지반에 건설되는 경우가 많기 때문에 지반변위가 터널 설계를 지배하며 설계는 기존의 탄성 및 탄소성 모델을 활용한 수치해석적인 방법에 크게 의존하고 있기 때문에 현장의 계측결과에 부합하는 지반 거동을 묘사하키에는 부족한 점이 많다. 미고결성 저토피고 지반에 대한 터널 굴착시 지반 거동, 붕괴 매카니즘 및 침하량 예측에 관해 연구하였고 변형율 연회를 고려한 비선형 해석을 실시하여 기존의 탄성 및 탄소성 모델과 비교하였다. 도시 NATM 터널의 지반거통을 파악한 결과 미고결성 저토피고 지반의 경우 변형율 연화모델을 적용하는 것이 지표면 침하 기울기가 급해지거나 전단대가 발생하는 등 실제의 지반거동을 현실적으로 모델링 할 수 있었다.

• 한국광학회지
• /
• 제28권6호
• /
• pp.273-280
• /
• 2017

본 논문에서는 낮은 도로 조명을 위한 freeform reflector를 설계하였다. 높이에 비해 넓은 차선까지 배광을 보내야 하는 낮은 도로 조명의 경우, 기존의 등주식 도로 조명에 비해 균제도를 맞추기 힘들다는 단점이 있다. 조명 등급 M3를 만족시키기 위해 reflector를 part 9개로 나누어 part 별 반사면의 기울기를 변화시켜 원하는 배광을 갖도록 하였고, 각 점을 기준으로 fitted curve를 그려 이에 따른 수식을 도출하였다. LightTools의 street light simulation을 통해 M3 조명 등급에 만족하는 것을 확인하였고 직접 제작하여 실제 도로상에서 조명 등급을 만족시키며 설계 결과에 대한 타당성을 입증하였다.

• 한국기계가공학회지
• /
• 제19권3호
• /
• pp.42-50
• /
• 2020

This study explores the effects of repair width on the deposition characteristics and mechanical properties of stainless steel samples repaired using direct energy deposition (DED). In the DED repair process, defects such as pores and cracks can occur at the interface between the substrate and deposited material. In this study, we changed the width of the pre-machined zone for repair in order to prevent cracks from occurring at the inclined surface. As a result of the experiment, cracks of 10-40 ㎛ in length were formed along the inclined slope regardless of the repair width. Yield and tensile strength decreased slightly as the repair width increased, but the total and uniform elongation increased. This is due to the orientation of the crack. For specimens with a repair width of 20 mm, yield and tensile strength were 883 MPa and 1135 MPa, respectively. Total and uniform elongations were 14.3% and 8.2%, respectively. During observation of the fracture specimens, we noted that the fracture of the specimen with an 8 mm repair width occurred along the slope, whereas specimens with 14 mm and 20 mm repair depths fractured at the middle of the repaired region. In conclusion, we found that tensile properties were dependent upon the repair width and the inclination of the crack occurred at the interface.

• Journal of Biosystems Engineering
• /
• 제25권6호
• /
• pp.457-462
• /
• 2000

Boom sprayers have been known by their excellency in field efficiency worker’s safety and pest control efficacy. The boom sprayer in Korea that was developed for paddy field is not suitable for upland field of which shape is irregular and inclination is steep, due to heavy chemical tank long boom width and manual on-off control of spraying. The goal of the study was to develope a boom control system that could control boom angles of left and right boom automatically and independently corresponding to local field slope. The prime mover was selected as a cultivating tractor. Main results of this study were as follows. 1. Ultrasonic sensor whose response time was 0.1s and response angle was within $\pm$20$^{\circ}$was selected to measure distance. Voltage output of the sensor(X, Volt) had a highly significant linear relationship with the vertical distance between the sensor and ground surface(Y, mm) as follows; Y=0.0036X-0.437 2. Left and right section of the boom could be folded up by a position control device(on-off control) which could control the left and right boom independently corresponding to local slope by equalizing distances between the sensor and boom at the center and left/right boom. Most reliable DB(dead band) was experimentally selected to be 75$\Omega$(6cm). 3. At traveling velocity of 0.3~0.5m/s RMS of error between desired and achieved height was less than 4.5cm The developed boom angle controller and boom linkage system were evaluated to be successful in achieving the height control accuracy target of $\pm$10cm.