Browse > Article
http://dx.doi.org/10.14775/ksmpe.2020.19.03.042

Effect of Repair Width on Mechanical Properties of 630 Stainless Steel Repaired by Direct Energy Deposition Process  

Oh, Wook-Jin (Dep. of Ocean Advanced Materials Convergence Eng., Korea Maritime and Ocean Univ.)
Shin, Gwang-Yong (Smart Manufacturing Process Group, Korea Inst. of Industrial Technology(KITECH))
Son, Yong (Digital Manufacturing Process Group, Korea Inst. of Industrial Technology(KITECH))
Shim, Do-Sik (Dep. of Ocean Advanced Materials Convergence Eng., Korea Maritime and Ocean Univ.)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.19, no.3, 2020 , pp. 42-50 More about this Journal
Abstract
This study explores the effects of repair width on the deposition characteristics and mechanical properties of stainless steel samples repaired using direct energy deposition (DED). In the DED repair process, defects such as pores and cracks can occur at the interface between the substrate and deposited material. In this study, we changed the width of the pre-machined zone for repair in order to prevent cracks from occurring at the inclined surface. As a result of the experiment, cracks of 10-40 ㎛ in length were formed along the inclined slope regardless of the repair width. Yield and tensile strength decreased slightly as the repair width increased, but the total and uniform elongation increased. This is due to the orientation of the crack. For specimens with a repair width of 20 mm, yield and tensile strength were 883 MPa and 1135 MPa, respectively. Total and uniform elongations were 14.3% and 8.2%, respectively. During observation of the fracture specimens, we noted that the fracture of the specimen with an 8 mm repair width occurred along the slope, whereas specimens with 14 mm and 20 mm repair depths fractured at the middle of the repaired region. In conclusion, we found that tensile properties were dependent upon the repair width and the inclination of the crack occurred at the interface.
Keywords
Direct Energy Deposition(DED); Repair; Crack; Tensile Properties; Fractured;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Reimann, M., Goebel, J., dos Santos, J. F., "Microstructure and mechanical properties of keyhole repair welds in AA 7075-T651 using refill friction stir spot welding," Materials & Design, Vol. 132, pp. 283-294, 2017.   DOI
2 RAHNI, M. M., Beidokhti, B., HADDAD-SABZEVAR, M., “Effect of filler metal on microstructure and mechanical properties of manganese-aluminum bronze repair welds,” Transactions of Nonferrous Metals Society of China, Vol. 27, No. 3, pp. 507-513, 2017.   DOI
3 Kadoi, K., Murakami, A., Shinozaki, K., Yamamoto, M., Matsumura, H., "Crack repair welding by CMT brazing using low melting point filler wire for long-term used steam turbine cases of Cr-Mo-V cast steels," Materials Science and Engineering: A, Vol. 666, pp. 11-18, 2016.   DOI
4 Yu, J. H., Choi, Y. S., Shim, D. S., Park, S. H., "Repairing casting part using laser assisted additive metal-layer deposition and its mechanical properties," Optics & Laser Technology, Vol. 106, pp. 87-93, 2018.   DOI
5 Graf, B., Gumenyuk, A., Rethmeier, M., "Laser metal deposition as repair technology for stainless steel and titanium alloys," Physics Procedia, Vol. 39, pp. 376-381, 2012.   DOI
6 Da Sun, S., Fabijanic, D., Barr, C., Liu, Q., Walker, K., Matthews, N., Brandt, M., "In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substrates," Surface and Coatings Technology, Vol. 333, pp. 210-219, 2018.   DOI
7 Oh, W. J., Lee, W. J., Kim, M. S., Jeon, J. B., Shim, D. S., "Repairing additive-manufactured 316L stainless steel using direct energy deposition," Optics & Laser Technology, Vol. 117, pp. 6-17, 2019.   DOI
8 Chew, Y., Pang, J. H. L., Bi, G., Song, B., "Thermo-mechanical model for simulating laser cladding induced residual stresses with single and multiple clad beads," Journal of Materials Processing Technology, Vol. 224, pp. 89-101, 2015.   DOI
9 Krzyzanowski, M., Bajda, S., Liu, Y., Triantaphyllou, A., Rainforth, W. M., Glendenning, M., "3D analysis of thermal and stress evolution during laser cladding of bioactive glass coatings," Journal of the mechanical behavior of biomedical materials, Vol. 59, pp. 404-417, 2016.   DOI
10 Wang, D., Hu, Q., Zeng, X., "Residual stress and cracking behaviors of Cr13Ni5Si2 based composite coatings prepared by laser-induction hybrid cladding," Surface and Coatings Technology, Vol. 274, pp. 51-59, 2015.   DOI
11 Liu, Q., Wang, Y., Zheng, H., Tang, K., Li, H., Gong, S., "TC17 titanium alloy laser melting deposition repair process and properties," Optics & Laser Technology, Vol. 82, pp. 1-9. 2016.   DOI
12 Zhang, K., Wang, S., Liu, W., & Long, R., "Effects of substrate preheating on the thin-wall part built by laser metal deposition shaping," Applied Surface Science, Vol. 317, pp. 839-855. 2014.   DOI
13 Oh, W. J., Son, Y., Shim, D. S., “Effect of In-Situ Post Heating on Repairing STS316L Built by Laser Powder Bed Fusion Using Direct Energy Deposition,” Korean Journal of Metals and Materials, Vol. 57, No. 8, pp. 543-553, 2019.   DOI
14 Balajaddeh, M. B., Naffakh-Moosavy, H., "Pulsed Nd: YAG laser welding of 17-4 PH stainless steel: Microstructure, mechanical properties, and weldability investigation," Optics & Laser Technology, Vol. 119, pp. 105651, 2019.   DOI
15 Rack, H. J., Kalish, D., “The strength, fracture toughness, and low cycle fatigue behavior of 17-4 PH stainless steel,” Metallurgical Transactions, Vol. 5, No. 7, pp. 1595-1605, 1974.   DOI