• 대한원격탐사학회지
• /
• 제34권1호
• /
• pp.127-139
• /
• 2018

The GOCI atmospheric correction overland surfaces is essential for the time-series analysis of terrestrial environments with the very high temporal resolution. We develop an operational GOCI atmospheric correction method over land surfaces, which is rather different from the one developed for ocean surface. The GOCI atmospheric correction method basically reduces gases absorption and Rayleigh and aerosol scatterings and to derive surface reflectance from at-sensor radiance. We use the 6S radiative transfer model that requires several input parameters to calculate surface reflectance. In the sensitivity analysis, aerosol optical thickness was the most influential element among other input parameters including atmospheric model, terrain elevation, and aerosol type. To account for the highly variable nature of aerosol within the GOCI target area in northeast Asia, we generate the spatio-temporal aerosol maps using AERONET data for the aerosol correction. For a fast processing, the GOCI atmospheric correction method uses the pre-calculated look up table that directly converts at-sensor radiance to surface reflectance. The atmospheric correction method was validated by comparing with in-situ spectral measurements and MODIS reflectance products. The GOCI surface reflectance showed very similar magnitude and temporal patterns with the in-situ measurements and the MODIS reflectance. The GOCI surface reflectance was slightly higher than the in-situ measurement and MODIS reflectance by 0.01 to 0.06, which might be due to the different viewing angles. Anisotropic effect in the GOCI hourly reflectance needs to be further normalized during the following cloud-free compositing.

• 대기
• /
• 제31권5호
• /
• pp.473-488
• /
• 2021

A new physical/statistical diagnostic downscale model has been developed for use to improve near-surface air temperature forecasts. The model includes a series of physical and statistical correction methods that account for un-resolved topographic and land-use effects as well as statistical bias errors in a low-resolution atmospheric model. Operational temperature forecasts of the Local Data Assimilation and Prediction System (LDAPS) were downscaled at 100 m resolution for three months, which were used to validate the model's physical and statistical correction methods and to compare its performance with the forecasts of the Korea Meteorological Administration Post-processing (KMAP) system. The validation results showed positive impacts of the un-resolved topographic and urban effects (topographic height correction, valley cold air pool effect, mountain internal boundary layer formation effect, urban land-use effect) in complex terrain areas. In addition, the statistical bias correction of the LDAPS model were efficient in reducing forecast errors of the near-surface temperatures. The new high-resolution downscale model showed better agreement against Korean 584 meteorological monitoring stations than the KMAP, supporting the importance of the new physical and statistical correction methods. The new physical/statistical diagnostic downscale model can be a useful tool in improving near-surface temperature forecasts and diagnostics over complex terrain areas.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.864-867
• /
• 2006

Thermal infrared images of Landsat-5 TM and Landsat-7 ETM+ sensors have been unrivalled sources of high resolution thermal remote sensing (60m for ETM+, 120m for TM) for more than two decades. Atmospheric effect that degrades the accuracy of Sea Surface Temperature (SST) measurement significantly, however, can not be corrected as the sensors have only one thermal channel. Recently, MODIS sensor onboard Terra satellite is equipped with dual-thermal channels (31 and 32) of which the difference of at-satellite brightness temperature can provide atmospheric correction with 1km resolution. In this study we corrected the atmospheric effect of Landsat SST by using MODIS data obtained almost simultaneously. As a case study, we produced the Landsat SST near the eastern and western coast of Korea. Then we have obtained Terra/MODIS image of the same area taken approximately 30 minutes later. Atmospheric correction term was calculated by the difference between the MODIS SST (Level 2) and the SST calculated from a single channel (31 of Level 1B). This term with 1km resolution was used for Landsat SST atmospheric correction. Comparison of in situ SST measurements and the corrected Landsat SSTs has shown a significant improvement in $R^2$ from 0.6229 to 0.7779. It is shown that the combination of the high resolution Landsat SST and the Terra/MODIS atmospheric correction can be a routine data production scheme for the thermal remote sensing of ocean.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.251-260
• /
• 2002

In the viscosity measurement of PIM feedstock, slip correction methods require a number of experiments and produce a high level of error. In this study, a rotational rheometer with a parallel-discs configuration having different surface roughness was tried to minimize the effect of the slip phenomenon. Disc surface was prepared in 3 different roughness conditions - a smooth and 2 roughened surfaces. Results with the roughened surfaces were compared with the results obtained with a slip correction method. Relationship between powder characteristics such as size and shape and a surface roughness of the disc was examined for feedstock of 4 different powders with a same binder. As results, the effect of the slip phenomenon could be sufficiently minimized on the roughened surface in most cases. However, the effect of the slip phenomenon could not be sufficiently minimized for feedstock of a round-particular-shape powder and in the case of very narrow gap size.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권2호
• /
• pp.100-106
• /
• 2010

The impact of surface quantization on device parameters of a Si metal oxide semiconductor (MOS) capacitor has been analyzed in the present work. Variation of conduction band bending, position of discrete energy states, variation of surface potential, and the variation of inversion carrier concentration at charge centroid have been analyzed for different gate voltages, substrate doping concentrations and oxide thicknesses. Oxide thickness calculated from the experimental C-V data of a MOS capacitor is different from the actual oxide thickness, since such data include the effect of surface quantization. A correction factor has been developed considering the effect of charge centroid in presence of surface quantization at strong inversion and it has been observed that the correction due to surface quantization is crucial for highly doped substrate with thinner gate oxide.

• 대한원격탐사학회지
• /
• 제35권6_1호
• /
• pp.1011-1030
• /
• 2019

인공위성 또는 항공기에서 사용되는 원격탐사용 센서는 지구 대기를 통과하는 전자기파를 측정하므로, 지구 대기에 의하여 흡수 또는 산란되는 과정에서 지표면의 정보가 영향을 받게 된다. 인공위성은 탑재센서의 사용목적에 따라 파장범위, 해상도가 다르지만, 공통적으로 지구 표면의 대상의 분광신호를 정확히 측정하기 위하여 대기에 의한 영향을 제거해야 하는 대기보정이 이루어져야 한다. 대기보정의 목적은 원격탐사 영상에서 대기 효과를 제거하여 지표면 반사도 값을 결정하고 지표면의 물리적 매개 변수를 도출하는 것이다. 현재까지 개발된 대기보정 알고리즘은 영상기반의 경험적인 방법 또는 현지 관측 자료를 이용한 간접적인 보정 방법에서 보다 복잡한 복사전달과정을 수치해석적으로 해석하는 직접적인 보정 방법으로 발전해 왔다. 본 연구는 지난 40여년 동안 개발된 대기보정 알고리즘에 대한 연구 기록을 분석함으로써, 대기보정 기술의 현황 및 주요 대기보정 알고리즘에 대한 연구 결과를 체계적으로 정립하여 관련 기술의 현황 및 연구동향을 제시하였다.

• 대한원격탐사학회지
• /
• 제30권5호
• /
• pp.627-639
• /
• 2014

인공위성의 가시 영역 관측으로부터 에어로솔의 정량적인 정보를 산출하는데 있어, 지표면 반사도의 보정은 매우 중요한 역할을 한다. 이에 본 연구에서는 두 가지 방법을 이용하여 천리안위성의 기상탑재체로부터 관측된 가시채널의 반사도로부터 지표면 반사도를 산출하고, 상호 비교 하여 정확도를 검증하고자 하였다. 첫 번째 방법은 최소 반사도법으로, 동일한 화소에서 일정 기간 동안 관측된 반사도 중 최소값이 에어로솔에 의한 영향 없이 지표반사에 의한 영향만을 포함한다는 가정을 기반으로, 대기산란 효과를 보정하여 지표면 반사도를 산출하는 방법이다. 두 번째 방법은 미리 알고 있는 에어로솔 정보를 고려하여 대기-에어로솔 효과를 보정함으로써 지표면 반사도를 얻는 것으로 본 연구에서 대기 보정법 이라 칭한다. 두 번째 방법을 적용하기 위해서는 정확한 에어로솔 정보가 요구되므로, 에어로솔 광학두께의 오차범위가 0.01 (${\geq}440nm$) 이내인 것으로 알려진 AERONET의 산출물을 이용하였다. 본 연구의 주요 목적은 최소 반사도법을 통하여 산출되는 지표면 반사도가 어느 정도의 정확도를 가지는지를 파악하는데 있어, 대기 보정법을 통하여 산출되는 값을 기준 값으로 두고 비교 분석을 수행하였다. 또한, 대기 중 존재하는 배경광학두께가 최소 반사도법의 정확도에 미치는 영향을 분석해보고자 하였다. 서울 지역에서 2012년 봄철 기간(3월 ~ 5월)동안 AERONET 관측지점에서 산출된 결과를 분석 한 결과, 대기 보정법을 통해 산출된 지표면 반사도의 평균이 0.108로 나타났고, 배경광학두께에 대한 고려 없이 최소 반사도법을 통하여 산출된 지표면 반사도는 그에 비해 약 0.012 높은 값을 보였다. 한 편 배경광학두께를 고려하였을 경우 그 차이는 0.010으로 감소하여, 정확도 향상에 기여하였음을 확인하였다.

• 신재생에너지
• /
• 제4권2호
• /
• pp.87-93
• /
• 2008

Wind tunnel test for the 12% scaled model of NREL Phase VI wind turbine was conducted in KARI low speed wind tunnel for $2006{\sim}2007$. The 1st and 2nd test was designed to find out the wind tunnel test method for the blade manufacturing accuracy and surface treatment method by using the composite and aluminum blades. And the 3rd test was designed to study the scale effect. The chord extension method which was used for Bo-105 40% scaled model was adapted for scale effect correction. Test results shows that the chord extension method works well for the torque slope but the maximum torque for scaled model is about 8% below than the real scale model. New correction method to correct this offset was proposed.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.337-340
• /
• 2007

Many researches conducted to investigate the relationship between surface emissivity and surface temperature in the past two decades and pointed out that the emissivity play a key role in applying remote sensing data to retrieve surface temperature. The task of surface temperature estimation is so important in many research fields, such as earth energy budgets, evapotranspiration, drought, global change and heat island effect. Therefore, it is indispensable to develop an effective and accurate technique to estimate the emissivity for accurate surface temperature estimations. This study developed an improved emissivity estimation technique for the use of surface temperature retrievals with MODIS data. The result of applying this improved technique using Band 31 of MODIS shows that the accuracy of estimated surface temperatures will be improved. This study also uses MODIS data observed in 2005 to establish the relationship between the surface emissivity correction factor and NDVI. Through the use of these correction factors, the land surface temperature can be retrieved more accurate with MODIS data.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.313-316
• /
• 2008

Although the positioning accuracy of the Global Positioning System (GPS) has been studied extensively and used widely, it is still limited due to errors from sources such as the ionospheric effect, orbital uncertainty, antenna phase center variation, signal multipath and tropospheric influence. This investigation addresses the tropospheric effect on GPS height determination. Data obtained from GPS receivers and co-located surface meteorological instruments in 2003 are adopted in this study. The Ministry of the Interior (MOl), Taiwan, established these GPS receivers as continuous operating reference stations. Two different approaches, parameter estimation and external correction, are utilized to correct the zenith tropospheric delay (ZTD) by applying the surface meteorological measurements (SMM) data. Yet, incorrect pressure measurement leads to very poor accuracy. The GPS height can be affected by a few meters, and the root-mean-square (rms) of the daily solution ranges from a few millimeters to centimeters, no matter what the approach adopted. The effect is least obvious when using SMM data for the parameter estimation approach, but the constant corrections of the GPS height occur more often at higher altitudes. As for the external correction approach, the Saastamoinen model with SMM data makes the repeatability of the GPS height maintained at few centimeters, while the rms of the daily solution displays an improvement of about 2-3 mm.