• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.477-480
• /
• 2003

We investigated the electro-optical (EO) performances of the super twisted nematic liquid crystal display (STN-LCD) on the polyimide (PI) surface using polymer film. Monodomain alignment of the plastic STN-LCD can be observed. A stable voltage-transmittance (V-T) curve of the plastic STN-LCD was observed on the polyimide (PI) surfaces using polymer film. Also, a faster response time for the plastic STN-LCD on the polyimide (PI) surfaces using polymer film can be achieved. However, the transmittance of the plastic STN-LCD on the polyimide (PI) surfaces using polymer film decreased greatly as cell gap decreases.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.76-79
• /
• 2003

The characteristic of single wall carbon nanotube (SW-CNT) and herringbone nano fiber (HB-CNF) emitters was described. SW-CNT synthesized by arc discharge and HB-CNF prepared by thermal CVD were mixed with binders and conductive materials, and then were formed by screen-printing process. In order to obtain efficient field emissions, the surface treatment of rubbing & peel-off was applied to the printed CNT and CNF emitters. The basic structure of FED was of a diode type through fully vacuum packaging. Also, we proposed a new triode type of field emitter using a mesh gate plate having tapered holes and could achieve the ideal triode properties with no gate leakage currents.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.75-80
• /
• 2019

One of the most critical aspects of the smartphone industry is the quality of the cover. And the vibrations of machining center are supposed to be the most dominant factors to damage the cover quality. In this study, structure of a machining center has been analyzed through experiments and computer simulations to figure out the main reasons of the vibrations. And the design alterations based on the analysis were applied to identify the effects of those alterations on the vibration suppression. The result shows that the design alterations can effectively suppress about 90% of the vibrations.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.84-87
• /
• 2018

As the propeller end speed increases, the propeller surface is damaged in the process of bubble formation and dropout. It is intended to prevent the corrosion of the propeller by modifying the shape of the end through the winglet structure to mitigate the cavitation phenomenon. In the case of conventional SUS materials, the cost of production is so high that plastic materials are used to prevent corrosion. This paper aims to mitigate the cavitation by deforming the shape of the end through the winglet structure by using the SMC composite material of the propeller using the existing SUS.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.99-105
• /
• 2017

This paper confirms the similarity of temperature tendency through numerical analysis and comparison with test, and it also confirms that temperature prediction of LED lightings is possible by numerical analysis. We confirmed that the temperature difference is about $10{\sim}20^{\circ}C$ except for some measurement points and shows similar tendency with the interpretation through manufacturing and performance analysis of AL heat sink applied Circular LED street lights and manufacturing and performance analysis of CMP-PLA heat sink applied Circular LED street lights. The simulations use Octree technique in SC/Tetra to set the grid size df the surface.

• 반도체디스플레이기술학회지
• /
• 제17권4호
• /
• pp.70-75
• /
• 2018

In this paper, we have studied the deformation problem of the scaffold caused by the FDM type 3D printer. The DOE (Design of experiment) and 3SC was used to solve the deformation problem of the scaffold generated from the adhesion surface between the scaffold and the bed. The methodology was used to derive the solution and the experiment was conducted on the derived solution. As a result of evaluating the experimental results obtained for the solution, it was found that the deformation of the scaffold was much improved. By using the DOE, We were possible to derive the output condition of scaffold.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.27-30
• /
• 2018

In this study, ZnO film was deposited on polycarbonate substrate by spin-spray method at low substrate temperature of $85^{\circ}C$. Surface morphology of ZnO films was changed by adding citrate from rod to dense structure. As-deposited ZnO film indicated high transmittance above 80%. In case of the resistivity, as-deposited ZnO film had high resistivity due to the existence of organic substance in the film. However, organic substance was removed and resistivity was decreased to $3.9{\times}10^{-2}{\Omega}{\cdot}cm$, after UV irradiation.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.25-29
• /
• 2017

In this paper, we have studied the deformation problem of the scaffold caused by the FDM type 3D printer. The Practical TRIZ technique was used to solve the deformation problem of the scaffold generated from the adhesion surface between the scaffold and the bed. The Practical TRIZ methodology was used to derive the solution and the experiment was conducted on the derived solution. As a result of evaluating the experimental results obtained for the solution, it was found that the deformation of the scaffold was much improved to the satisfactory level.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.77-82
• /
• 2021

This numerical study focuses on the analysis of fume particle dispersion characteristics over the surface of target workpiece in laser micro-hole machining process. The effects of oblique stagnation flow over fume generating machining point are examined by carrying out a series of three-dimensional random particle simulations along with probabilistic particle generation model and particle drag correlation of low Reynolds number. Present computational model of fume particle dispersion is found to be capable of assessing and quantifying the fume particle contamination in precision hole machining which may influenced by different types of air flow patterns and their flow intensity. The particle size dependence on dispersion distance of fume particles from laser machining point is significant and the effects of increasing flow oblique angle are shown quite differently when slot blowing or slot suction flows are applied in micro-hole machining.

• 반도체디스플레이기술학회지
• /
• 제20권1호
• /
• pp.37-41
• /
• 2021

We report on the formation of anodic aluminum oxide (AAO) film using sulfuric acid containing cerium salt. When the temperature of the sulfuric acid containing cerium salt changes from 5 ℃ to 20 ℃, the current density and the thickness growth rate increase. The surface morphology of the AAO film change according to the temperature of the electrolytes. And that affected the breakdown voltage and the plasma etch rate. The breakdown voltage per unit thickness was the highest at 15 ℃, and the plasma etch rate was the lowest at 10 ℃ at 2.80 ㎛/h.