• Journal of Information Display
• /
• 제8권3호
• /
• pp.1-4
• /
• 2007

The influence of a silane layer on the performances of polymer light emitting diode(pLED)s has been studied. Glycidoxypropyltrimethoxysilane(GPS) with an epoxy functional group was used as a surface modifier for ITO substrates. The GPS layer was inserted between an ITO and a poly(3,4)-ethylenedioxythiophene/polystyrenesulfonate(PEDOT) by wet process and the performances of PLEDs were investigated. The introduction of GPS layer increased the brightness and efficiency of PLEDs by 30%. In addition, the lifetime of PLEDs was also improved considerably by using GPS as a surface modifier.

• 반도체디스플레이기술학회지
• /
• 제8권3호
• /
• pp.7-11
• /
• 2009

In this paper, we developed and presented a design result for optimizing the geometry of Ag circular SPP waveguide for subwavelength waveguide applications. We investigated the effect of the design parameters on the light propagation and find the optimum design for small modal size, high coupling coefficient, and low sensitivity. The results show that the globally optimal design locates optimal waveguide geometries more efficiently than individual optimal points for multivalued objective function.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.97-102
• /
• 2010

Propagation modes of symmetric metal-insulator-metal SPP waveguides are analyzed. Main characteristics of these waveguides such as mode effective index, propagation length, and penetration depths are calculated at the telecom wavelength for different layer thickness. We adopt Au, Al as a metal material and air, glass as a dielectric material and obtain different optical characteristics. The surface plasmon characteristics in this paper provide a numerical insight for designing nanostructure metal plasmon waveguide.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.310-313
• /
• 2005

CW laser dopant activation (CLDA) is suggested as an alternative to conventional thermal annealing. The sheet resistance of the ion doped poly-Si after CLDA is sufficiently low compared to the value measured after thermal annealing. The surface damage due to ion doping on the poly-Si can be recovered while CW laser scan for dopant activation. Therefore, the CLDA can be applied to LTPS processing.

• 반도체디스플레이기술학회지
• /
• 제17권4호
• /
• pp.1-5
• /
• 2018

Atomic force microscopy (AFM) simulation for Si (001) surface defects was conducted by using density functional theory (DFT). Three major defects on the Si (001) surface are difficult to analyze due to external noises that are always present in the images obtained by AFM. Noise-free surface defects obtained by simulation can help identify the real surface defects on AFM images. The surface defects were first optimized by using a DFT code. The AFM tip was designed by using five carbon atoms and positioned on the surface to calculate the system's energy. Forces between tip and surface were calculated from the energy data and converted into an AFM image. The simulated AFM images are noise-free and, therefore, can help evaluate the real surface defects present on the measured AFM images.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.150-155
• /
• 2006

Carbon nanotubes backlight unit (CNT-BLU) that lightened by field emission was developed into practicability. According to our novel structure, AC mode circuit design and simple printing process, CNT-BLU could achieve 85% of uniformity, 8000 nits of brightness and low material and fabrication cost. Based on these performances, this new planar backlight technology has chances to proceed to mass production and has the potential to replace traditional backlight technology because of its good properties, like the simple processes, easy to large scale, low surface temperature, low power consumption, optical film-free and Hg-free, etc.

• 한국광학회지
• /
• 제34권6호
• /
• pp.241-247
• /
• 2023

본 연구에서는 355 nm 파장의 나노초 레이저를 비정질 실리콘 박막에 조사하여 형성된 주기적 laser-induced periodic surface structure (LIPSS) 구조의 분광학적 특성을 연구하였다. 지름 196 ㎛의 가우시안 빔을 단위면적당 레이저 펄스 190-280회, 레이저 빔의 세기는 100-130 mJ/cm² 범위에서 'ㄹ' 자 형태로 2차원 스캔하였다. 그 결과 Si 박막 표면에 ~300 nm 주기의 LIPSS 구조가 레이저 편광에 수직 방향으로 정렬되었다. 시료의 투과율 스펙트럼을 측정하여 transverse-electric 편광과 transverse-magnetic 편광에 대해서 각각 700 nm, 500 nm 근방에서 dip이 관측되었다. 이 현상을 설명하기 위해 1차원 격자구조 모델을 이용하여 rigorous coupled-wave analysis를 이용한 시뮬레이션을 하여 편광에 따른 도파모드 공진에 의한 특성임을 규명하였다.

• 한국결정성장학회지
• /
• 제19권6호
• /
• pp.288-292
• /
• 2009

LPD법을 이용하여 유리 기판 위에 발수/친수 패터닝 기판을 제조하였다. 발수 표면은 거친 표면을 갖는 ZnO 박막을 FAS를 이용한 표면 개질에 의하여 만들어졌고, 친수 표면은 자외선을 조사하여 FAS를 제거함으로써 만들어졌다. Hexagonal ZnO rod는 LPD법에 의하여 ZnO seed 층이 코팅된 유리 기판 위에 수직으로 성장되었다. 침적시간이 증가함에 따라 ZnO rod의 직경과 두께는 증가하였다. 제조된 ZnO 박막의 표면구조, 두께, 결정구조, 투과율과 접촉각은 FE-SEM, XRD, UV-vis와 contact angle meter를 이용하여 측정하였다. $20^{\circ}{\sim}30^{\circ}$의 접촉각을 갖는 친수 ZnO 박막은 FAS 표면 처리에 의해 $145^{\circ}{\sim}161^{\circ}$의 접촉각을 갖는 표면으로 바뀌었다. 제조된 발수 표면은 $300\;{\mu}m$, 3 mm의 dot size를 갖는 shadow mask를 이용하여 자외선을 조사하여 패터닝 되었다. 최종적으로 자외선이 조사된 발수 표면은 친수 표면으로 바뀌었다.

• 반도체디스플레이기술학회지
• /
• 제21권3호
• /
• pp.125-129
• /
• 2022

The current display technology tends to be highly integrated with high resolution, the element size is gradually downsized, and the structure becomes complicated. Inductively coupled plasma (ICP) dry etcher of various types of etching equipment is a structure that places a large multi-divisional antenna source on the top lid, passes current to the Antenna, and generates plasma using the induced magnetic field generated at this time. However, in the case of a device of a large area size, a support that can withstand a load structurally is necessary, and when these support portions are applied, arrangement of antenna becomes difficult, which causes reduction in uniformity. As described above, the development of antenna source of a large area having a uniform plasma density on the whole surface is difficult to restrict hardware (H/W). As a solution to this problem, we confirmed the change in uniformity of plasma by applying two kinds of specific shape faraday shield(FICP) to the lower part of the large area upper lid antenna of 6 and 8th more than that generation size. In this thesis, we verify the faraday shield effect which can improve plasma uniformity control of ICP dry etcher equipment applied to medium and large displays.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.127-132
• /
• 2002

In this paper, a new method for displaying a surface deformation is proposed using the fuzzy model. In the proposed method, it is enough that only one rule is added to the fuzzy model to display a surface deformation. Furthermore, designer can easily determine which parameters should be used and how much they should be changed in order to alter shapes as they want. The proposed method is, thus, a simple, but effective technique that can also be applied to real time operation. The results of the computer simulation are also given to demonstrate the validity of the proposed algorithm.