• Journal of Information Display
• /
• v.8 no.3
• /
• pp.1-4
• /
• 2007

The influence of a silane layer on the performances of polymer light emitting diode(pLED)s has been studied. Glycidoxypropyltrimethoxysilane(GPS) with an epoxy functional group was used as a surface modifier for ITO substrates. The GPS layer was inserted between an ITO and a poly(3,4)-ethylenedioxythiophene/polystyrenesulfonate(PEDOT) by wet process and the performances of PLEDs were investigated. The introduction of GPS layer increased the brightness and efficiency of PLEDs by 30%. In addition, the lifetime of PLEDs was also improved considerably by using GPS as a surface modifier.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.3
• /
• pp.7-11
• /
• 2009

In this paper, we developed and presented a design result for optimizing the geometry of Ag circular SPP waveguide for subwavelength waveguide applications. We investigated the effect of the design parameters on the light propagation and find the optimum design for small modal size, high coupling coefficient, and low sensitivity. The results show that the globally optimal design locates optimal waveguide geometries more efficiently than individual optimal points for multivalued objective function.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.97-102
• /
• 2010

Propagation modes of symmetric metal-insulator-metal SPP waveguides are analyzed. Main characteristics of these waveguides such as mode effective index, propagation length, and penetration depths are calculated at the telecom wavelength for different layer thickness. We adopt Au, Al as a metal material and air, glass as a dielectric material and obtain different optical characteristics. The surface plasmon characteristics in this paper provide a numerical insight for designing nanostructure metal plasmon waveguide.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.310-313
• /
• 2005

CW laser dopant activation (CLDA) is suggested as an alternative to conventional thermal annealing. The sheet resistance of the ion doped poly-Si after CLDA is sufficiently low compared to the value measured after thermal annealing. The surface damage due to ion doping on the poly-Si can be recovered while CW laser scan for dopant activation. Therefore, the CLDA can be applied to LTPS processing.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.4
• /
• pp.1-5
• /
• 2018

Atomic force microscopy (AFM) simulation for Si (001) surface defects was conducted by using density functional theory (DFT). Three major defects on the Si (001) surface are difficult to analyze due to external noises that are always present in the images obtained by AFM. Noise-free surface defects obtained by simulation can help identify the real surface defects on AFM images. The surface defects were first optimized by using a DFT code. The AFM tip was designed by using five carbon atoms and positioned on the surface to calculate the system's energy. Forces between tip and surface were calculated from the energy data and converted into an AFM image. The simulated AFM images are noise-free and, therefore, can help evaluate the real surface defects present on the measured AFM images.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.150-155
• /
• 2006

Carbon nanotubes backlight unit (CNT-BLU) that lightened by field emission was developed into practicability. According to our novel structure, AC mode circuit design and simple printing process, CNT-BLU could achieve 85% of uniformity, 8000 nits of brightness and low material and fabrication cost. Based on these performances, this new planar backlight technology has chances to proceed to mass production and has the potential to replace traditional backlight technology because of its good properties, like the simple processes, easy to large scale, low surface temperature, low power consumption, optical film-free and Hg-free, etc.

• Korean Journal of Optics and Photonics
• /
• v.34 no.6
• /
• pp.241-247
• /
• 2023

We examine the spectral characteristics of laser-induced periodic surface structures (LIPSSs) formed on an amorphous silicon film irradiated by a 355-nm nanosecond laser. A Gaussian beam with a diameter of 196 ㎛ is used to perform a two-dimensional raster scan. The laser's pulse number is varied from 190 to 280, and its intensity is adjusted within 100-130 mJ/cm². LIPSSs with a periodicity of approximately 330 nm form on the surface of the Si film, aligned perpendicular to the laser's polarization. Transmission spectra of the samples show dips around 700 nm for transverse electric polarization and around 500 nm for transverse magnetic polarization. The features are investigated with a one-dimensional-grating model using a rigorous coupled-wave analysis. Simulations confirm that the observed dips are due to the resonant modes, depending on the polarization.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.288-292
• /
• 2009

Hydrophobic/hydrophilic patterned substrates were fabricated on a glass substrate by a liquid phase deposition (LPD) method. Hydrophobic surface was obtained by modifying ZnO thin films with a rough surface using a fluoroalkyltrimethoxysilane (FAS) and hydrophilic surface was prepared by decomposing FAS on an exposed to UV light. The hexagonal ZnO rods were perpendicularly grown by LPD method on glass substrates with a ZnO seed layer. The diameter and thickness of hexagonal ZnO rods were increased as a function of increases of immersion time. The surface morphology, thickness, crystal structure, transmittance and contact angle of prepared ZnO thin films were measured by field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), UV-visible spectrophotometer (UV-vis) and contact angle measurement. Hydrophilic ZnO thin films with a contact angle of $20^{\circ}{\sim}30^{\circ}$ were changed to a hydrophobic surface with a contact angle of $145^{\circ}{\sim}161^{\circ}$ by a FAS surface treatment. Prepared hydrophobic surface was pattered by an irradiation of UV light using shadow mask with $300\;{\mu}m$ or 3 mm dot size. Finally, the hydrophobic surface exposed to UV light was changed to a hydrophilic surface.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.125-129
• /
• 2022

The current display technology tends to be highly integrated with high resolution, the element size is gradually downsized, and the structure becomes complicated. Inductively coupled plasma (ICP) dry etcher of various types of etching equipment is a structure that places a large multi-divisional antenna source on the top lid, passes current to the Antenna, and generates plasma using the induced magnetic field generated at this time. However, in the case of a device of a large area size, a support that can withstand a load structurally is necessary, and when these support portions are applied, arrangement of antenna becomes difficult, which causes reduction in uniformity. As described above, the development of antenna source of a large area having a uniform plasma density on the whole surface is difficult to restrict hardware (H/W). As a solution to this problem, we confirmed the change in uniformity of plasma by applying two kinds of specific shape faraday shield(FICP) to the lower part of the large area upper lid antenna of 6 and 8th more than that generation size. In this thesis, we verify the faraday shield effect which can improve plasma uniformity control of ICP dry etcher equipment applied to medium and large displays.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.2
• /
• pp.127-132
• /
• 2002

In this paper, a new method for displaying a surface deformation is proposed using the fuzzy model. In the proposed method, it is enough that only one rule is added to the fuzzy model to display a surface deformation. Furthermore, designer can easily determine which parameters should be used and how much they should be changed in order to alter shapes as they want. The proposed method is, thus, a simple, but effective technique that can also be applied to real time operation. The results of the computer simulation are also given to demonstrate the validity of the proposed algorithm.