• Title/Summary/Keyword: surface damage

Search Result 2,326, Processing Time 0.039 seconds

The Study on the Long-term Reliability Characteristics of Ribbon Joint: Solar Cell Ribbon Thickness and Solder Compositions (태양전지 Ribbon 두께와 조성에 따른 Ribbon접합부의 장기 신뢰성 특성에 관한 연구)

  • Jeon, Yu-Jae;Kang, Min-Soo;So, Kyung-Jun;Lee, Jae-June;Shin, Young-Eui
    • Journal of Energy Engineering
    • /
    • v.23 no.4
    • /
    • pp.88-94
    • /
    • 2014
  • In this paper, Thermal Shock tests were performed varying the composition of the solder and ribbon thickness (A-type:0.2mm/60Sn40Pb, B-type:0.25mm/60Sn40Pb, C-type:0.2 /62Sn36Ag2Pb, D-type:0.25mm/62Sn36Ag2Pb) for evaluating the long-term reliability about Ribbon junction of Silicon solar cells. Thermal Shock test condition was performed during the 600cycles having $-40^{\circ}C{\sim}85^{\circ}C$ temperature range each 15 minutes; One cycle time was 30min. As a result, the initial efficiency of the A-type, B-type, and C, D-type were showed 15.0%, 15.4% and 15.8% respectively. After thermal shock test, the efficiency decreasing-rate of each type were as follow that A-type was 13.8%, B-Type was 15.4%. C-Type and D-Type was 15.3% and 16.2%, respectively. Also, degradation of surface changes and I-V characteristic curves were showed that the series resistance of the A, C-type was increased. Also, current lowering starting point of C-type shown 0.05volt[v] earlier than that of A-type. And B, D-type shown characteristics of composite lowering efficiency such as increase of series resistance, decrease of parallel resistance and cell damage. Therefore Initial solderability and efficiency of specimens using the solder with SnAgPb were superior. But, It has inferior the long-term reliability. The test was confirmed that as the ribbon thickness increases, long-term reliability of solar cell will decrease.

Effect of Pumpkin, Corn Silk, Adzuki Bean, and Their Mixture on Weight Control and Antioxidant Activities in High Fat Diet-Induced Obesity Rats (호박즙, 옥수수수염차, 팥차 및 혼합물이 식이유도 비만동물모델에서 체중과 항산화 활성에 미치는 영향)

  • Park, Jae-Hee;Lee, Eunji;Park, Eunju
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.45 no.9
    • /
    • pp.1239-1248
    • /
    • 2016
  • Pumpkin juice (PJ), corn silk tea (CT), and adzuki bean tea (AT) have long been used for treatment of obesity in Korea. This study investigated the efficacy of PJ, CT, AT, and their mixture (PCA) on alteration of body weight and antioxidant metabolism in high-fat diet (HFD)-induced obese rats. After being fed HFD for 4 weeks, SD rats were divided into six groups fed a normal diet (ND), HFD, HFD+PJ [250 mg/kg body weight (BW)], HFD+CT (250 mg/kg BW), HFD+AT (250 mg/kg BW), and HFD+PCA (PJ : CT : AT=1:1:1, 250 mg/kg BW) for another 9 weeks. HFD consumption resulted in total lipid, triglyceride, and total cholesterol accumulation in adipose tissue, which was reduced by administration of PJ, CT, AT, or PCA. The plasma oxygen radical absorbance capacity value and hepatic glutathione peroxidase activity significantly increased compared to the HFD group. The liver thiobarbituric acid reactive substances was significantly lower in the PCA group than the HFD group. HFD-induced DNA damage in hepatocytes, as measured by comet assay, decreased in the PJ, AT, and PCA-supplemented groups. The PCA group exerted a superior antigenotoxic effect compared to other treatments. PCA recovered the concentration of plasma adiponectin, which was reduced by HFD. Adipocyte surface area (%) was significantly higher in the HFD group than the ND group, significantly lower in the PJ and PCA groups than the HFD group, and not significantly different compared with the ND group. Based on the results, supplementation of PJ, CT, AT, and PCA exhibited lipid-lowering effects in adipocytes of HFD-induced obese rats. Furthermore, the PCA group exhibited superior antioxidant activity in all treated groups. This study suggests that a mixed beverage consisting of PJ, CT, and AT may be a significant source of natural antioxidants, which might be helpful in preventing obesity and progress of various oxidative stresses induced by HFD.

Material Characteristics and Deterioration Assessment of the Stone Buddhas and Shrine in Unjusa Temple, Hwasun, Korea (화순 운주사 석조불감의 재질특성과 풍화훼손도 평가)

  • Park, Sung-Mi;Lee, Myeong-Seong;Choi, Seok-Won;Lee, Chan-Hee
    • Journal of Conservation Science
    • /
    • v.24
    • /
    • pp.23-36
    • /
    • 2008
  • The stone Buddhas and Shrine of Unjusa temple (Korea Treasure No. 797) in Hwasun formed in Koryo Dynasty are unique style which the Buddha faces each other the back parts of south and north within the stone Shrine. The stone Buddhas and Shrine are highly evaluated in historical, artistic and academic respects. But, the stone properties have been exposed in the open system various aspects of degradations weathered for a long time without specific protective facilities. The rock materials of the stone Buddhas and Shrine are about 47 blocks, and total press load is about 56.6 metric ton. The host rocks composed mainly of white grey hyaline lithic tuff and rhyolitic tuff breccia. In addition, biotite granite used as part during the restoration works. The chemical index of alteration for host tuffaceous rocks and the replacement granites range from 52.1 to 59.4 and 50.0 to 51.0, respectively. Weathering types for the stone Buddhas and Shrine were largely divided with physical, chemical and biological weathering to make a synthetic deterioration map according to aspects of damage, and estimate share as compared with surface area. Whole deterioration degrees are represented that physical weathering appeared exfoliation. Chemical weathering is black coloration and biological weathering of grey lichen, which show each lighly deterioration degrees. According to deterioration degree by direction of stone Buddhas and Shrine, physical weathering mostly appeared by 39.1% on the sorthern part, and chemical weathering is 61.2% high share on the western part. Biological weathering showed 38.3% the largest distribution on the southern part. Therefore, it is necessary to try hardening for the parts with serious cracks or exfoliations, remove secondary contaminants and organisms through regular cleaning. Also necessary to make a plan to remove moisture of the ground which causes weathering, and estimate that need established and scientific processing through clinical demonstration of conservation plan that chooses suitable treatment.

  • PDF

Results of Coventional Radiotherapy for Carcinomas of the Tonsillar Region (편도암의 방사선 치료 성적)

  • Nah Byung Sik;Nam Taek Keun;Ahn Sung Ja;Chung Woong Ki
    • Radiation Oncology Journal
    • /
    • v.15 no.2
    • /
    • pp.97-104
    • /
    • 1997
  • of $PLC-\gamma$ 1 activity. Results : In the immunohistochemistry, the expression of $PLC-\beta$ was negative for all grnups. The expression of $PLC-\gamma$ 1 was highest in the group III followed by group II in the proliferative zone of mucosa. The expression of PKC-01 was strong1y positive in group I followed by group II in the damaged surface epithelium. The above findings were also confirmed in the immunoblotting study. In the irnrnunoblotting study, the expressions of $PLC-\beta,\;PLC-\gamma\;1,\;and\;PLC-\delta$ were the same as the results of immunohistochemistry The expression of ras oncoprotein was weakly Positive in groups II, III and IV. The of EGFR was the highest in the group II, III, followed by group W and the expression of PKC was weakly positive in the group II and III. Conclusion : $PLC-\gamma$ 1 mediated signal transduction including ras oncoprotein, EGFR, and PKC play a significant role irL mucosal regeneration after irradiation. $PLC-\delta$ 1 mediated signal transduction might have an important role in mucosal damage after irradiation. Further studies will be necessary to confirm the signal transduction mediating the $PLC-\delta$ 1.

  • PDF

Electrochemical Decontamination of Metallic Wastes Contaminated with Uranium Compounds (우라늄화합물로 오염된 금속폐기물의 전해제염)

  • 양영미;최왕규;오원진;유승곤
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.1 no.1
    • /
    • pp.11-23
    • /
    • 2003
  • A study on the electrolytic dissolution of SUS-304 and Inconel-600 specimen was carried out in neutral salt electrolyte to evaluate the applicability of electrochemical decontamination process for recycle or self disposal with authorization of large amount of metallic wastes contaminated with uranium compounds generated by dismantling a retired uranium conversion plant in Korea. Although the best electrolytic dissolution performance for the specimens was observed in a Na2s04 electrolyte, a NaNO$_3$ neutral salt electrolyte, in which about 30% for SUS-304 and the same for Inconel-600 in the weight loss was shown in comparison with that in a Na$_2$SO$_4$ solution, was selected as an electrolyte for the electrochemical decontamination of metallic wastes with the consideration on the surface of system components contacted with nitric acid and the compatibility with lagoon wastes generated during the facility operation. The effects of current density, electrolytic dissolution time, and concentration of NaNO$_3$ on the electrolytic dissolution of the specimens were investigated. On the basis of the results obtained through the basic inactive experiments, electrochemical decontamination tests using the specimens contaminated with uranium compounds such as UO$_2$, AUC (ammonium uranyl carbonate) and ADU (ammonium diuranate) taken from an uranium conversion facility were performed in 1M NaNO$_3$ solution with the current density or In mA/$\textrm{cm}^2$. it was verified that the electrochemical decontamination of the metallic wastes contaminated uranium compounds was quite successful in a NaNO$_3$ neutral salt electrolyte by reducing $\alpha$ and $\beta$ radioactivities below the level of self disposal within 10 minutes regardless of the type of contaminants and the degree of contamination.

  • PDF

Histochemical Detection of Ionic Zinc in the Rat Olfactory Mucosa: Zinc Selenium Autometallography ($ZnSe^{AMG}$) (랫드 후각점막내 Zinc 이온의 조직화학적 동정)

  • Nam, Dong-Woo;Sun, Yuan-Jie;Kim, Sung-Joo;Kim, Yong-Kuk;Kim, Soo-Jin;Yu, Yun-Cho;Jeong, Young-Gil;Jo, Seung-Mook
    • Applied Microscopy
    • /
    • v.33 no.2
    • /
    • pp.145-154
    • /
    • 2003
  • The present study was designed to demonstrate ionic zinc in the rat nasal mucosa by means of zinc selenium autometallography ($ZnSe^{AMG}$). Rats were given sodium selenide either intraperitoneally (i.p) or intranasally (i.n). Prior to the i.n. administration the rats were anesthetized with pentobarbital sodium (30 mg/kg, i.p.). A thin plastic tube coupled to a Hamilton syringe was then inserted into the right nostril and $10{\mu}l$ of the solution was instilled. For the i.p. administration non-anesthetized rats were given $100{\mu}l$ of the sodium selenide solution (10 mg/kg). Control rats were instilled with saline. After 2 hrs survival, the rats were anaesthetized and transcardially perfused with 3% glutaraldehyde. The olfactory area was removed and put into same fixative. The nose was then sectioned ($30{\mu}m$) horizontally, autometallography (AMG) was performed according to Danscher et al. (1997). After silver enhancement, fine AMG grains were scattered in the whole length of the olfactory epithelium containing olfactory receptor neurons, sustentacular and basal cells. However, much higher concentration of the AMG grains occupied near the surface and in the basal region of the olfactory epithelium. Both groups of i.p. and i.n. administration showed almost same level in the concentration of the AMG grains. In i.n. group, few AMG grains were also found in olfactory nerves of the lamina propria, suggesting zinc transport into the olfactory bulb via olfactory axons. At the electron microscopic level, the AMG grains were most entirely found in the supporting cells of the olfactory epithelium, and they were mostly localized in lysosome-like organelles. The i.n. group showed various signs of tissue damage of the olfactory mucosa, where dense concentration of AMG grains were localized at crystalloid structures. The present study demonstrated dense population of ionic zinc in the rat olfactory epithelium. zinc may play a role in the olfactory functioin and in the pathogenesis of the neurodegerative disorders affecting nose.

Study on Cultural Method of Summer Buckwheat Planted in Spring (여름메밀의 춘파재배법 연구)

  • Keun-Yong Park;Rae-Kyung Park;Byeong-Han Choi
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.37 no.2
    • /
    • pp.149-154
    • /
    • 1992
  • Buckwheat has been a popular favorite food crop in Korea for a long time. The objective of the study was to investigate the effects of climatic conditions and cultural methods on grain yields of summer buckwheat variety Sinnong 1 planted during the spring season in Suwon, Korea from 1989 to 1991. Frost minimum temperature of late April was -0.3$^{\circ}C$ in 1990 being very low as compared with 3.7$^{\circ}C$ of the normal year, and affected early growth of the seedlings emerging from the soil surface. In late May of 1990, the frost minimum temperature was 7.3$^{\circ}C$ being low as compared with 8.8$^{\circ}C$ of the normal year, and also induced cold injury to fertilization and grain filling. Total precipitation 374.5mm of mid and late June, 1990 provided serious damage to the grain filling and maturing buckwheat seeds and along with causing seed sprouting before harvest. However, the climates of 1989 and 1991 were very good for the growth and development of spring-sown buckwheats. When summer buckwheat cultivar Sinnong 1 was planted on April 20, 1989, its highest grain yields 268-292kg /10a were harvested from the plots of seeding rate 8kg /10a, drill seeding and polyethylene film mulching, and the mean grain yield of the plots was 238kg /10a in 1989, but 64.3kg in Suwon, and 40.2kg /10a in Muan in 1990. In 1991 maximum grain yield 277kg /10a was produced from the April 15 planted and vinyl-mulched plot, and 255kg /10a from the April 25 planted and non-mulched plot. Herbicide Alachlor-sprayed plots produced lower grain yields than no weed control and manual weeding plots. Mechanized drill-seeding saved 83~84% in planting hours as compared with manual broadcasting 21.6 hours /ha, and produced 9% more in grain yields from the two-season croppings of mechanized drill-seeding culture being 364kg /10a in total yields per year.

  • PDF

Effects of Kinds of Cryoprotectants on the Characteristics of Frozen Fowl Semen (닭 정액 동결 시 동결 보호제가 정액 성상에 미치는 영향)

  • Choi, Jin Seok;Shin, Dan-Bi;Ko, Yeoung-Gyu;Do, Yoon-Jung;Byun, Mijeong;Park, Soo-Bong;Seong, Hwan-Hoo;Kim, Hyun;Kong, Il-Keun;Kim, Sung Woo
    • Korean Journal of Poultry Science
    • /
    • v.40 no.3
    • /
    • pp.171-178
    • /
    • 2013
  • The purpose of this study was to evaluate the sperm viability, normal acrosome and mitochondrial activity in the frozen-thawed fowl semen by different cryoprotectants. The experiment was carried out on 10 sexually adult roosters of Ogye. The semen was collected twice a week and pooled semen was diluted 1:1 EK extender containing no cryoprotectant at $5^{\circ}C$. After equilibration for 30 minutes, diluted chicken semen was diluted 1:1 extender containing either 7% dimethylacetamide (DMA), 7% dimethylformamide (DMF) or 7.5% methylacetamide (MA) at final concentration and was put in 0.5 mL plastic straws and frozen for 30 minutes by exposure to liquid nitrogen vapor 4 cm above the surface of liquid nitrogen, followed by plunging into liquid nitrogen. Frozen semen was thawed in water bath at $5^{\circ}C$ for 2 minutes. For cytometric analysis, the frozen-thawed semen was diluted with EK extender to a final concentration of 90 million spermatozoa per mL. Sperm membrane integrity was evaluated as SYBR-14 and propidium iodide (PI). Acrosome integrity was assessed with fluorescein isothiocyanate-labeled PSA and PI. The percentage of mitochondrial function was estimated by using Rhodamine123 (R123) and PI. In conclusion, freezing rooster semen by using 7% DMF as cryoprotectant was significantly highest in rates of survival and mitochondrial function while its rate of damage of acrosome was significantly lowest. As a result, DMF is the cryoprotectant that has the lowest influences on sperm membranes and acrosome integrity. Therefore it could be used for freezing method of animal genetic conservation method for poultry diversity.

A Review on the Change in Submarine Roles in Naval Warfare: Based on Warfare Paradigm (전쟁 패러다임의 전환에 따른 잠수함의 역할 변화에 대한 고찰)

  • Jang, Jun-Seop
    • Strategy21
    • /
    • s.46
    • /
    • pp.89-122
    • /
    • 2020
  • The longing for submarine manufacture and the fear of her power had exited for a long time, but submarine that could submerge and attack was built from 20th century by science technology development. The question, 'Submarine can exercise her power in naval warfare?' had exited before World War I, but the effective value of submarine was shown in the procedure of a chain of naval warfare during World War I and World War II. Germany and the United States made the best use of submarines at that time. The submarines of these nations mounted fierce attack on the enemy's battleships and merchant ships and blocked the sea lanes for war material. These fierce attack on ships became impossible After World War II, and the major powers reduced and coordinated the defence budget, so they considered the role of submarine. However, submarine is still powerful weapon system because she can secretly navigate under the water, and one of the most important force in the navy. The aim of this thesis is analyzing submarine roles in each naval warfare and integrating maritime strategy and weapon system technology into her roles. First, the research about represent submarine roles like anti-surfaceship warfare, anti-submarine warfare, intelligence gathering, land attack, supporting special operation and mine landing warfare will be presented, then the major naval warfare where submarine participated(during ex-World War I, World War I, World War II, The Cold War Era and post Cold War) and the analyzing of submarine roles by time will be presented. Submarine was developed for anti-surfaceship warfare during ex-World War I but could not make remarkable military gain in naval warfare because her performance and weapon was inadequate. However, the effective value of submarine in the procedure of a chain of naval warfare was shown during World War I and World War II. The major powers put battleships into naval warfare undiscriminatingly to command the sea power and submarines did massive damage to enemy navy power, so put a restraint the maritime power of enemy, and blocked the sea lanes for war material. After World War II, the battlefield situation changed rapidly and the concept of preemption became difficult to apply in naval warfare. Therefore, the submarine was unable to concentrate on anti-surfaceship mission. Especially during the Cold War era, nuclear submarine came to appear and her weapon system developed rapidly. These development gave submarines special missions: anti-submarine warfare and intelligence gathering. At that time, United States and Soviet submarines tracked other nation's submarines loaded with nuclear weapons and departing from naval their base. The submarines also collected information on the volume of ships and a coastal missile launching site in company with this mission. After Cold War, the major powers despatched forces to major troubled regions to maintain world peace, their submarines approached the shores of these regions and attacked key enemy installations with cruise missiles. At that time, the United States eased the concept of preemption and made the concept of Bush doctrine because of possible 911 terrorism. The missiles fired from submarines and surface battleships accurately attacked key enemy installations. Many nations be strategically successful depending on what kind of mission a submarine is assigned. The patterns of future naval warfare that my country will provide against will be military power projection and coalition/joint operations. These suggest much more about what future missions we should assign to submarines.

Study on the Manufacturing techniques & Conservation of Iron Pot from Cheonmachong Ancient Tomb (천마총 출토 철부(鐵釜)의 제작기법 및 보존처리)

  • Lee, Seung Ryul;Shin, Yong Bi;Jung, Won Seob
    • Journal of Conservation Science
    • /
    • v.30 no.3
    • /
    • pp.263-275
    • /
    • 2014
  • It's shown how to proceed the study on Manufacturing techniques & Conservation to the Iron Pot from Cheonmachong Ancient Tomb(the 155th Tomb in Hwangnam-dong). In order to investigate manufacturing techniques of the Iron Pot, some parts of the relic were gathered. After mounting, polishing and etching on the relic, analyzing the metal microstructure was conducted. Also it's conducted a SEM-EDS analysis on the nonmetallic inclusion. White iron structure was observed in the metallurgical structure inspection, SEM-EDS analysis. It seems to be dried slowly at room temperature after casting, doesn't look as particular heat treatment to improve brittleness. It is estimated that it's as the handle seam side were verified about 3cm inch wide, 1.5 thick in center of body, so 2 separate half-completed products was cast with width-type mould. The manufacturing techniques Using white cast iron structure, width-type mould are observable to the Iron Pot excavated from Sikrichong Ancient Tomb & Hwangnamdaechong grand Ancient Tomb around those were constructed the same time. It's able to recognize that it's almost identical manufacturing techniques at that time. Conservation is generically following those are survey of pretreatment, foreign material removal, stabilization, restoration and color matching in the order. cleaning & drying were added to the process as occasion demands. The strengthening treatment were difficult with artifact's volume, low concentration Paraloid NAD-10 solution was spread two or three times with a brush, surface hardening also came up with 15wt% Paraloid NAD-10 solution after the conservation was complete. There were connection & restoration for the restoration to the damage after modeling forms that it's similar to damaged parts by using the Fiber Reinforced Plastic resins(POLYCOAT FH-245, mold laminated type). Throughout this research, capitalizing on accumulations of measurements about the production technique of Iron Pot in the time of the fifth and 6th centuries is no less important than the Iron artifact's conservation for a better study in the future.