• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.839-842
• /
• 2012

We report for the first time the synthesis of niobium dioxide nanowires on a sapphire substrate by chemical vapor transport method. We identified single crystalline nature of as-synthesized nanowires by scanning electron microscopy and transmission electron microscopy. Niobium dioxide nanowires with their large surface-to-volume ratio and high activities can be employed for electrochemical catalysts and immunosensors. The Raman spectrum of niobium dioxide nanowires also confirmed their identity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.219-219
• /
• 2012

The formation and thermal desorption behaviors of octanethiol (OT) SAMs on single crystalline Au (111) and polycrystalline Au, Ag, and Cu substrates were examined by X-ray photoelectron microscopy (XPS), thermal desorption spectroscopy (TDS), and contact angle (CA) measurements. XPS and CA measurements revealed that the adsorption of octanethiol (OT) molecules on these metals led to the formation of chemisorbed self-assembled monolayers (SAMs). Three main desorption fragments for dioctyl disulfide (C8SSC8+, dimer), octanethiolate (C8S+), and octanethiol (C8SH+) were monitored using TDS to understand the effects of surface morphology and the nature of metal substrates on the thermal desorption behavior of alkanethiols. TDS measurements showed that a sharp dimer peak with a very strong intensity on single crystalline Au (111) surface was dominantly observed at 370 K, whereas a broad peak on the polycrystalline Au surface was observed at 405 K. On the other hand, desorption behaviors of octanethiolates and octanethiols were quite similar. We concluded that substrate morphology strongly affects the dimerization process of alkanethiolates on Au surfaces. We also found that desorption intensity of the dimer is in the order of Au＞＞Ag＞Cu, suggesting that the dimerization process occurs efficiently when the sulfur-metal bond has a more covalent character (Au) rather than an ionic character (Ag and Cu).

• 한국결정성장학회지
• /
• 제11권5호
• /
• pp.218-223
• /
• 2001

수평 Bridgman 방법으로 성장한 사파이어 인고트를 절단 연마한 후, 사파이어 결정기판의 표면을 우레탄 천 위에서 실리카 졸을 사용하여 폴리싱하였다. 표면의 결정성을 X-선 회절을 통하여 조사하였으며, 2중 결정회절에 의한 반치폭은 200~400 arcsec을 가지며, 결정 인고트의 절편화 또는 양면 연삭 연마에 따른 잔류응력에 의한 표면에서의 기계적인 스트레스에 의해 결정성이 손상되어진다. 화학-기계적인 폴리싱공정을 수행한 수에 표면처리로 $1,200^{\circ}C$로 4시간 열처리 및 산처리를 연속적으로 수행할 경우 결정성이 반치폭 8.3 arcsec까지 줄어들어 향상됨을 확인하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.295-298
• /
• 2007

Reduction of optical losses in crystalline silicon solar cells by surface modification is one of the most important issues of silicon photovoltaics. Porous Si layers on the front surface of textured Si substrates have been investigated with the aim of improving the optical losses of the solar cells, because an anti-reflection coating(ARC) and a surface passivation can be obtained simultaneously in one process. We have demonstrated the feasibility of a very efficient porous Si ARC layer, prepared by a simple, cost effective, electrochemical etching method. Silicon p-type CZ (100) oriented wafers were textured by anisotropic etching in sodium carbonate solution. Then, the porous Si layers were formed by electrochemical etching in HF solutions. After that, the properties of porous Si in terms of morphology, structure and reflectance are summarized. The structure of porous Si layers was investigated with SEM. The formation of a nanoporous Si layer about 100nm thick on the textured silicon wafer result in a reflectance lower than 5% in the wavelength region from 500 to 900nm. Such a surface modification allows improving the Si solar cell characteristics. An efficiency of 13.4% is achieved on a monocrystalline silicon solar cell using the electrochemical technique.

• 한국결정성장학회지
• /
• 제15권5호
• /
• pp.202-207
• /
• 2005

Kaolin과 규석 및 $Mg(OH)_2$등의 원료로 만들어진 slip을 casting 할 때 slip의 점도가 slip casting 속도와 소결체의 미세조직에 미치는 영향을 보면 slip-casting속도는 slip의 점도가 낮을 경우 감소하였으며 slip의 점도범위는 $3.0\~17.0\;cP$가 적당하였다. Slip의 점도를 조절하면 표면층, 표면 내부층, 중간층, 내면층의 미세조직을 비교적 균일하게 casting 할 수 있다 소성온도 $1350^{\circ}C$에서 시편의 구성광물은 cordierite 결정만으로 되어있었다.

• 방사성폐기물학회지
• /
• 제19권1호
• /
• pp.1-7
• /
• 2021

The pH dependence of sorption distribution coefficient (Kd) of Np(IV) on MX-80 in Ca-Na-Cl type solution with the ionic strength of 0.3 M, which was similar to one of the reference groundwaters in crystalline rock, was experimentally investigated under the reducing conditions. The overall trend of Kd on MX-80 was independent of pH at 5 ≤ pH ≤ 10 but increased as pH increased at pH ≤ 5. The 2-site protolysis non-electrostatic surface complexation and cation exchange model was applied to the experimentally measured pH dependence of Kd and the optimized surface complexation constants of Np(IV) sorption on MX-80 were estimated. The values of surface complexation constants in this work agreed relatively well with those in the Na-Ca-Cl solution previously evaluated, suggesting that compared to Na+, the competition of Ca2+ with Np(IV) for surface complexation on MX-80 was not much strong in Ca-Na-Cl solution. The sorption model well predicted the pH dependence of Kd values but slightly overestimated the sorption at the low pH region.

• 충청수학회지
• /
• 제27권2호
• /
• pp.287-295
• /
• 2014

In this paper, we prove that the image of the representation of the automorphism group of a supersingular K3 surface of Artin-invariant 1 over odd characteristic p on the global two forms is a finite cyclic group of order p + 1. Using this result, we deduce, for such a K3 surface, there exists an automorphism which cannot be lifted over a field of characteristic 0.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1419-1424
• /
• 2006

We could reduce the reflection from PET(polyethylene terephthalate) film surface by natural plasma etching which does not use etch masks. The plasma etched PET film showed lower reflectance and higher transmittance which is resulted by making subwavelength structure(SWS) on the film surface by the plasma etch rate difference between the amorphous and crystalline region in the surface of PET film.

• 한국의류학회지
• /
• 제20권3호
• /
• pp.467-480
• /
• 1996

Interactions between PET POY and solvents were estimated by the changes in microstructure and surface morphology. Changes in microstructure and surface morphology by the solvent treatments were: an increase in crystallite size, a decrease in interplanar spacing, a change in degree of orientation of crystalline region, a change in surface characteristics.

• East Asian mathematical journal
• /
• 제30권3호
• /
• pp.321-326
• /
• 2014

In this paper, we present a simple proof of Corollary 3.3 in [5] using the fact that for a K3 surface of finite height over a field of odd characteristic, the height is a multiple of the non-symplectic order. Also we prove for a non-symplectic CM K3 surface defined over a number field the Frobenius invariant of the reduction over a finite field is determined by the congruence class of residue characteristic modulo the non-symplectic order of the K3 surface.