• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.109-115
• /
• 2015

In this study, the Stokes flow in the microchannel is analysed where the semicircular protuberances with constant spacing are attached on the upper and lower walls with staggered arrangement. For the low Reynolds number flow in microchannel, Stokes approximation is used and the periodicity and symmetry of the flow are considered to determine the stream function and pressure distribution in the flow field by using the method of least squared error. As results, the streamline patterns and pressure distributions in the flow field are shown for some specific values of the size and spacing of the protuberances, and shear stress distributions on the surface of semicircular protuberances are plotted. Especially, for an important physical property, the average pressure gradient along the microchannel is obtained and compared with that for the case of in-phase arrangement of the upper and lower protuberances. And, for the small clearance between the protuberances of upper and lower walls or between the protuberances and the opposite wall, the average pressure gradient is derived from the lubrication theory and compared with that of the present study.

• 한국생산제조학회지
• /
• 제24권3호
• /
• pp.308-313
• /
• 2015

In this research, a multi-objective optimal design of a scroll compressor lower frame was approximated, and the design parameters of the lower frame were selected. The sensitivity of the design parameters was induced through a parameter analysis, and the thickness was determined to be the most sensitive parameter to stress and deflection. All of the design parameters regarding the mass are sensitive factors. It was formulated for the problem about stress and deflection to be caused by the axial load. The sensitivity of the design variables was determined using an orthogonal array for the parameter analysis. Using the central composite and D-optimal designs, a second polynomial approximation of the objective and constraint functions was formulated and the accuracy was verified through an R-square. These functions were applied to the optimal design program (NSGA-II). Through a CAE analysis, the effectiveness of the central composite and D-optimal designs was determined.

• 한국정보통신학회논문지
• /
• 제16권7호
• /
• pp.1358-1363
• /
• 2012

본 논문에서는 초전도체 안테나와 같은 고효율 소형안테나를 해석하고 있다. 그런데 초전도체의 표면저항은 주파수의 제곱에 비례하여 증가하기 때문에 초전도체 안테나는 낮은 주파수대역에서 유용하다. 따라서 이에 사용되는 안테나의 크기가 커지게 되는데 이와 같은 안테나를 소형화 하는데 있어 정합회로의 역할은 매우 중요하다 할 수 있다. 본 논문은 초전도체 소형안테나를 구성함에 있어 손실특성을 최소화 할 수 있는 최적의 정합회로 구조를 준정근사법을 이용하여 해석한다. 또한 결과의 유효성을 확인하기 위해 안테나의 입력임피던스특성과 방사특성을 평가한다.

• Journal of Hydrospace Technology
• /
• 제2권1호
• /
• pp.1-9
• /
• 1996

We consider the following two questions mainly in this study. First one is how the free surface hayes affect the lift of a shallowly submerged moving body. For this matte., we reinterpret the theoretical results of Kochin(1936), and point out that the high Froude number approximation is not always on the safer side. Second one is what sort of dimensionless parameters determine the occurrence of wave breaking behind a moving submerged body. Temporarily before getting a better answer, we propose that the two-parameter-plane, namely, the plane of the Froude number and the square root of the ratio of the submerged depth and the body length, may be used for predicting the possibility of wave breaking behind the submerged body. A region in the parameter plane is put forth as that of wave breaking, and the validity of this proposal is shown by its agreement with the existing experimental data of Parkin et al(1955) and those of Duncan(1983). Finally, linear and nonlinear numerical results are compared with the existing experimental data to see in what range of the parameters the linear and nonlinear theory case predict the wave field and the pressure on the body with reasonable accuracy. However, since the experimental data, which offer both the pressure and wave elevation for a submerged moving body, are very scarce, much cannot be attained through this comparative study. Hence, it is strongly recommended to carry out well planned experiments to get such data.

• 한국광학회지
• /
• 제11권2호
• /
• pp.80-84
• /
• 2000

Diamond turning machine으로 알루미늄을 가공하여 f/1.5, 구경 50mm인 포물명경을 제작하였다. 이진위상(binary phase) 홀로그램으로 포물면경 현상측정을 위한 computer generated hologram(CGH)을 encoding하였으며 staircase encodling 방법으로 간섭무늬 곡선의 직선근사를 하였다. 간섭무늬 데이터를 포스트스크립트(PostScript) 파일로 변환한 후 CGH 원도를 레이저 프린터로 확대 출력하고 축소 촬영하여 CGH를 제작하였다. 측정부(viewing arm)에 CGH가 위치하는 Twyman-Green 간섭계를 구성하여 포물면경의 표면형상을 측정하였다. 측정결과를 직접표면형상측정법 및 간섭계를 이용한 자동시준법의 측정 결과와 비교하고 오치를 분석하였다.

• Korea-Australia Rheology Journal
• /
• 제19권3호
• /
• pp.141-146
• /
• 2007

We examine the wall contact of a $3\;{\mu}m$ tethered DNA chain's free end under shear with a focus on developing schemes for double-tethering in the application of making scaffolds for molecular wires. At this scale our results are found to be highly dependent on small length scale rigidity. Chain-end-wall contact frequency, mean fractional extension deficit upon contact, and standard deviation in extension upon contact are examined for scaling with dimensionless flow strength, Wi. Predictions made using a one dimensional approximation to the Smoluchowski equation for a dumbbell and three dimensional dumbbell simulations produce extension deficit, standard deviation, and frequency scaling exponents of -1/3, -1/3, and 2/3, respectively whereas more fine-grained Kratky-Porod (KP) simulations produce scaling exponents of -0.48, -0.42, and 0.76. The contact frequency scaling of 2/3 is derived from the known results regarding cyclic dynamics Analytical scaling predictions are in agreement with those previously proposed for ${\lambda}-DNA$. [Ladoux and Doyle, 2000, Doyle et al., 2000]. Our results suggest that the differences between the dumbbell and the KP model are associated with the addition of chain discretization and the correct bending potential in the latter. These scaling results will aide future exploration in double tethering of DNA to a surface.

• Tribology and Lubricants
• /
• 제10권1호
• /
• pp.14-26
• /
• 1994

The minimum oil film thickness(MOFT) in the connecting-rod bearing of a 1.5 liter, L-4, gasoline engine is measured up to 5500 rpm and calculated to study the dynamically loaded engine bearing. Short bearing approximation and Mobility method are used for theoretical analysis of oil film characteristics. And cylinder pressure, crank-pin surface temperature and bearing temperature are measured as the input data of theoretical analysis. The MOFT are measured by the total capacitance method(TCM). To improve the reliability of the test results, a reasonable determination method of bearing clearance is introduced and used, and the effects of cavitation and aeration on the test results are neglected. The crankshaft is grounded by means of a slip ring. A scissor type linkage system was developed to measure the MOFT and bearing temperature. The effects of engine speed, load and oil viscosity on the measured and calculated minimum oil film thicknesses are investigated at 1500 to 5500 rpm. From the comparison between the measured and calculated MOFT, it is found that a qualitative similarity exists between them, but in all cases, the measured MOFT are smaller than those calculated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.204-204
• /
• 2012

Peierls instability and spin ordering of zigzag graphene nanoribbons (GNR) created on a fully hydrogenated graphene (graphane) are investigated as a function of their width using first-principles density-functional calculations within the generalized-gradient approximation. For the width containing a single zigzag C chain (N=1), we find the presence of a Peierls instability with a bond alternated structure. However, for width greater than N=1, the Peierls distortion is weakened or disappears because of the incommensurate feature of Fermi surface nesting due to the interaction of C chains. Instead, there exists the antiferromagnetic (AFM) spin ordering in which the edge states are ferromagnetically ordered but the two ferromagnetic (FM) edges are antiferromagnetically coupled with each other, showing that electron-lattice coupling and spin ordering in GNR are delicately competing at an extremely thin width of N=2. It is found that, as the width of GNR increases, the energy gain arising from spin ordering is enhanced, but the energy difference between the AFM and FM (where two edge states are ferromagnetically coupled with each other) orderings decreases.

• 로봇학회논문지
• /
• 제1권2호
• /
• pp.188-196
• /
• 2006

During the communication and interaction with a human using motions or gestures, a humanoid robot needs not only to look like a human but also to behave like a human to make sure the meanings of the motions or gestures. Among various human-like behaviors, arm motions of the humanoid robot are essential for the communication with people through motions. In this work, a mathematical representation for characterizing human arm motions is first proposed. The human arm motions are characterized by the elbow elevation angle which is determined using the position and orientation of human hands. That representation is mathematically obtained using an approximation tool, Response Surface Method (RSM). Then a method to generate human-like arm motions in real time using the proposed representation is presented. The proposed method was evaluated to generate human-like arm motions when the humanoid robot was asked to move its arms from a point to another point including the rotation of its hand. The example motion was performed using the KIST humanoid robot, MAHRU.

• 대한의용생체공학회:의공학회지
• /
• 제18권4호
• /
• pp.499-505
• /
• 1997

본 연구에서는 생체조직의 흡수계수와 산란계수를 비침습적으로 측정하는 방법에 관하여 연구하였다. 피코초 영역의 펄스폭을 갖는 레이저광으로 조직을 조사하고 산란반사된 빛을 시간상관 단일 광자 계수법을 이용하여 피코초 시간영역에서 측정하였다. 측정된 시간분해 반사율의 최대치에 이르는 시간 및 나중소멸부분의 점근선의 기울기로부터 계산되는 값과 디컨블루션방법에 의한 곡선맞춤으로 얻은 값을 비교하여 서로 잘 일치함을 확인하였다. 매질의 산란이 커질수록 흡수가 작을수록 근사식은 더 잘 맞으므로 가시광선부터 근적외선의 파장영역에서 흡수에 비해 산란이 매우 큰 생체조직의 광특성을 비침습적으로 측정하는 중요한 방법이 될 수 있다.