• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.45-52
• /
• 2005

A general approximate optimization technique by sequential design domain(SDD) did not save response values for getting an approximate function in each step. It has a disadvantage at aspect of an expense. In this paper, previous response values are recycled for constructing an approximate function. For this reason, approximation function is more accurate. Accordingly, even if we did not determine move limit, a system is converged to the optimal design. Size and shape optimization using approximate optimization technique is carried out with SDD. Algorithm executing Pro/Engineer and ANSYS are automatically adopted in the approximate optimization program by SDD. Convergence criterion is defined such that optimal point must be located within SDD during the three steps. The PLBA(Pshenichny-Lim-Belegundu-Arora) algorithm is used to solve approximate optimization problems. This algorithm uses the second-order information in the direction finding problem and uses the active set strategy.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2007년도 추계학술발표논문집
• /
• pp.319-322
• /
• 2007

철도차량의 피로수명예측은 안전성과 신뢰성을 확보하고 높은 품질을 위한 중요한 관점이다. 이것은 최적설계 과정에서 추가의 제한조건으로 최소 피로수명값을 사용해서 접근할 수 있다. 하지만 피로수명은 회수의 함수이기 때문에 최적설계 적용에 제약이 따른다. 본 연구는 피로수명예측을 위한 최적설계에 대해 2단계 반응표면모델의 응용을 제안한다. 적용 예제로 컨테이너 화차의 제동 브라켓 엔드빔의 피로파손 문제에 대해 제안한 방법의 유효성을 설명한다.

• 한국해양공학회지
• /
• 제22권2호
• /
• pp.7-12
• /
• 2008

A far field solution of the slowly varying force on an offshore structure by gravity ocean waves was shown as a function of the reflection and transmission of the body disturbed waves. The solution was obtained from the conservation of the momentum flux, which simply describes various wave forces, while making it unnecessary to compute complicated integration over a control surface. The solution was based on the assumption that the frequency difference of the bichromatic incident waves is small and its second order term is negligible. The final solution is expressed in term of the reflection and transmission waves, i.e. their amplitudes and phase angles. Consequently, it shows that not only the amplitudes but also the phase differences make critical contributions to the slowly varying force. In a limiting case, the slowly varying force solution gives the one of the mean drift force, which is only dependent on the reflection wave amplitude. An approximation is also suggested in a case where only the mean drift force information is available.

• Bulletin of the Korean Chemical Society
• /
• 제1권4호
• /
• pp.117-121
• /
• 1980

The effect of lateral intermolecular interactions among the adsorbate molecules has been incorporated into the theory of multilayer physical adsorption developed previously by the present authors within the frame of Bragg-Williams approximation and the resulting adsorption isotherm has been used to interpret the adsorption data of tetramethylsilane vapor on clean iron film which we failed to account for in our previous works. The result has shown that up to the point where the relative pressure is about 0.7 considerable improvement is obtained but beyond this point there still remains large difference between theoretical and experimental isotherm. Such difference is supposed to arise from the neglect of effect of vertical interaction between the adsorbate molecules and the adsorbent surface.

• Structural Engineering and Mechanics
• /
• 제20권4호
• /
• pp.435-450
• /
• 2005

Here, the dynamic instability characteristics of aero-thermo-mechanically stressed functionally graded plates are investigated using finite element procedure. Temperature field is assumed to be a uniform distribution over the plate surface and varied in thickness direction only. Material properties are assumed to be temperature dependent and graded in the thickness direction according to simple power law distribution. For the numerical illustrations, silicon nitride/stainless steel is considered as functionally graded material. The aerodynamic pressure is evaluated based on first-order high Mach number approximation to the linear potential flow theory. The boundaries of the instability region are obtained using the principle of Bolotin's method and are conveniently represented in the non-dimensional excitation frequency-load amplitude plane. The variation dynamic instability width is highlighted considering various parameters such as gradient index, temperature, aerodynamic and mechanical loads, thickness and aspect ratios, and boundary condition.

• Journal of Magnetics
• /
• 제12권2호
• /
• pp.59-63
• /
• 2007

Ferromagnet/Semiconductor heterostructures have attracted much attention because of their potential applications in spintronic devices. We investigated the electronic structures and magnetism of monolayer Fe on $CuGaSe_2(001)$ by using the all-electron full-potential linearized augmented plane-wave method within a generalized gradient approximation. We considered the monolayer Fe deposited on both the CuGa atoms terminated (CuGa-Term) and the Se atom terminated (Se-Term) surfaces of $CuGaSe_2(001)$. The calculated magnetic moment of the Fe atom on the CuGa-Term was about $2.90\;{{\mu}_B}$. Those of the Fe atoms on the Se-Term were in the range of $2.85-2.98\;{{\mu}_B}$. The different magnetic behaviors of the Fe atoms on two different surfaces were discussed using the calculated layer-projected density of states.

• Journal of Astronomy and Space Sciences
• /
• 제38권1호
• /
• pp.39-44
• /
• 2021

In the general accretion disk model theory, the accretion disk surrounding an astronomical object comprises fluid rings obeying Keplerian motion. However, we should consider relativistic and rotational effects as we close in toward the center of accretion disk surrounding spinning compact massive objects such as a black hole or a neutron star. In this study, we explore the geometry of the inner portion of the accretion disk in the context of Mukhopadhyay's pseudo-Newtonian potential approximation for the full general relativity theory. We found that the shape of the accretion disk "puffs up" or becomes thicker and the luminosity of the disk could exceed the Eddington luminosity near the surface of the compact spinning black hole.

• Structural Engineering and Mechanics
• /
• 제85권1호
• /
• pp.135-145
• /
• 2023

This study presents the free vibrational responses of bi-directional axially graded cylindrical shell panels using 3D graded finite element approximation under a temperature field. The cylindrical shell panel is graded in two directions and made of metal-ceramic materials. To extract material properties, the Voigt model is combined with a Power-law material distribution. Convergence and validation studies are performed on the developed computational model to ensure its accuracy and effectiveness. Furthermore, a parametric study is performed to evaluate the developed model, which demonstrates that geometrical parameters, imperfect materials (porosity), support conditions, and surface temperature all have a significant impact on the free vibration responses of a bi-directional axially graded cylindrical shell panel in a thermal environment.

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.216-221
• /
• 2017

폴리머 안경렌즈를 제조할 때 가시광선 영역에서 투과되는 빛을 증가시키고, 안경렌즈 표면에 형성되는 허상을 방지하는 반사방지 기능은 매우 중요하다. 본 연구에서는 굴절률 1.56, 1.60 및 1.67을 갖는 안경렌즈를 폴리머 렌즈 모노머 및 이염화 이부틸 주석 촉매제, 알킬 인산 에스터 이형제 등의 혼합물을 인젝션 몰드 방법으로 열중합 공정을 적용하여 제조하였다. 폴리머 안경렌즈 표면에서의 반사방지 효과를 조사하기 위하여 다층 박막 반사방지 코팅 구조(양면 또는 단면 코팅), 3층 박막의 Gaussian gradient-index profile 불연속 근사 반사방지 코팅 구조, 3층 박막의 quarter-wavelength 근사 반사방지코팅 구조 등 다양한 반사방지 코팅 구조를 설계하였고, E-beam 증착 시스템을 이용하여 열중합공정으로 제조된 폴리머 안경렌즈에 각각 코팅하였다. 폴리머 안경렌즈의 광학적 특성은 UV-visible spectrometer로 분석하였다. 반사방지 코팅 층을 구성하는 박막의 굴절률, 표면 거칠기 등의 소재 특성은 Ellipsometer와 원자힘 현미경(AFM)으로 분석하였다. 분석결과, 굴절률 1.56의 낮은 굴절률을 갖는 폴리머 안경렌즈에서 가장 효과적인 반사방지 코팅 구조는 다층 박막 반사방지 코팅 구조의 양면코팅이었다. 하지만 굴절률 1.67의 고굴절률 안경렌즈에 대해서는 3층 박막의 Gaussian gradient-index profile 불연속 근사반사방지 코팅 구조의 양면 코팅도 다층박막 반사방지 코팅구조의 양면코팅에 상응하는 반사방지 효과를 나타내었다.

• 한국자기학회지
• /
• 제18권6호
• /
• pp.206-210
• /
• 2008

최근의 연구에 따르면 체심입방구조(bcc)를 가지는 Rh은 상자성 상태와 약간의 에너지 차를 보이며 강자성체가 된다고 한다. 이 연구에서는 bcc Rh(001) 표면의 전자구조와 자성을 일반기울기 근사 하에서 총퍼텐셜 선형보강 평면파 에너지 띠 계산방법을 이용하여 연구하였다. 표면의 자성상태는 강자성상태를 가졌으며, unrelaxed 된 경우에 표면층의 자기모멘트는 $0.48{\mu}B$로 덩치상태의 $0.43{\mu}B$에 비해 증진되었으나, 표면 바로 밑층의 자기모멘트는 $0.23{\mu}B$으로 상당히 줄어들었다. 총에너지 및 원자힘 계산을 통해 relaxed 된 구조를 구하였는데, 이 때 표면 층은 안쪽으로, 표면 바로 밑층은 바깥 쪽으로 이동하여 원래의 층간격보다 약 7.0% 줄어들었다. 이러한 층간 간격 변화는 표면 자성을 약화시켜, 표면층과 표면 바로 밑층의 자기모멘트를 $0.36{\mu}B$ 및 $0.14{\mu}B$로 줄어들게 하였다.