• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.519-545
• /
• 2013

An outline of the Timoshenko beam theory is presented. Two differential equations of motion in terms of deflection and rotation are comprised into single equation with deflection and analytical solutions of natural vibrations for different boundary conditions are given. Double frequency phenomenon for simply supported beam is investigated. The Timoshenko beam theory is modified by decomposition of total deflection into pure bending deflection and shear deflection, and total rotation into bending rotation and axial shear angle. The governing equations are condensed into two independent equations of motion, one for flexural and another for axial shear vibrations. Flexural vibrations of a simply supported, clamped and free beam are analysed by both theories and the same natural frequencies are obtained. That fact is proved in an analytical way. Axial shear vibrations are analogous to stretching vibrations on an axial elastic support, resulting in an additional response spectrum, as a novelty. Relationship between parameters in beam response functions of all type of vibrations is analysed.

• Smart Structures and Systems
• /
• 제19권4호
• /
• pp.431-439
• /
• 2017

This investigation is aimed to develop a model of experimental-computation determination of a support moment of a cantilever beam loaded with concentrated force at its end including the optimal choice of coordinates of deflection data points and parameters of transformation of deflection data in case of insufficient accuracy of the assignment of initial parameters (support settlement, angle of rotation of the bearing section) and cantilever beam length. The influence of distribution and characteristics of sensors on the cantilever beam on the accuracy of determining the support moment which improves in the course of transition from the uniform distribution of sensors to optimal non-uniform distribution is shown. On the basis of the theory of inverse problems the method of transformation reduction at numerical differentiation of deflection functions has been studied. For engineering evaluation formulae of uncertainty estimate to determine a support moment of a cantilever beam at predetermined uncertainty of measurements using sensors have been obtained.

• 한국운동역학회지
• /
• 제21권2호
• /
• pp.141-152
• /
• 2011

The purpose of this study was to investigate the projectile factors and biomechanical characteristics of men's hammer throwing during turning phases. Four national leveled athletes including Korea national record holder participated in this study. After full warm-up, each participant performed 6 trials of hammer throwing with their best. The best recorded trial was selected from each participant and they were analyzed for this study. Three-Dimensional motion analysis using a system of 5 video cameras at a sampling frequency 60Hz was performed for this study. As the number of turns increased, athletes revealed following characteristics. 1) The single and double support time decreased. 2) The rotation foot was closed to axis foot and it revealed greater medio-lateral displacement than that of horizontal one. 3) At the transition point from double support to single support, ball was in front of rotation foot so that not much angular velocity obtained. For the projectile factors, projectile angle did not show differences while projectile height and velocity revealed differences among the participants. It may indicated that each athlete has different fitness and skill level to resist centrifugal force which become larger as the number of turn increased.

• 한국운동역학회지
• /
• 제16권3호
• /
• pp.173-181
• /
• 2006

The purpose of this study is grasp the problem of the gymnast, Kim, Dong-Hwa's Kip to Swallow Motion in Rings, and make up for the weak points to help him to perform a better performance. Therefore, two tryouts for $28^{th}$ Athens Olympic Games were filmed using video camera then finalized with Kinematical Analysis using 3D motion analysis program followings are the form of conclusions. 1. In the very first tryout, when he was doing a Swallow Support Scale, his CM position was high and arm slope was deduction because when he was doing Kip, the ascent velocity was low and he tried excessively to pull him on rings due to relying upon angular movement of shoulder joint. 2. When he was doing drop, he let his hip angle bend only little bit and let fall so making shoulder angle wider and maintain the level horizontally occurs strong drop motion when vertical descent is happening. 3. As a result, lowering the direction of a kick makes CM's movement path lower, increase vertical ascent velocity, and it helps to do the Swallow Support motion in short period of time. 4. After a strong drop motion, which is deep and fast, would make rope of ring shake so there is a defect that the body moves to forward area. However, it does not effect in Swallow Support Scale motion. 5. In the second tryout, trunk rotation angle and arm slope was fixed decrease while doing rotary motion. When rotary motion was happening, before the body was going under the rings, maintained his arm slope horizontally so his Swallow Support Scale motion was nearly perfect.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.646-649
• /
• 2011

본 논문에서는 멀티-카메라 뷰 주차 보조 시스템을 위한 프로토타입을 제안한다. 제안한 시스템은 운전자에게 세방향의 차량 주변의 영상을 제공한다. 평행주차나 주차장에서 사각지역을 줄이고, 편안하고 안전한 주행을 위해 핸들 조정에 따라 와이드 앵글의 CCD 카메라 영상을 출력한다. 제안한 시스템은 차량 실험을 통해 성능을 확인하였다.

• 한국운동역학회지
• /
• 제21권3호
• /
• pp.269-279
• /
• 2011

This study was analyzed the characteristics on the stability of posture while conducting a through two and half rotation technic of pench$\acute{e}$ in rhythmic gymnastics. Two rhythmical gymnastics player(LKH and SSJ) who is a member of the national team were selected, and for obtain the kinematic and kinetic variables were used a ProReflex MCU 240 infrared camera(Qualisys, Sweden) and a Type9286A force platform(Kistler, Switzerland). The mechanical factors were computed by using Visual3D program and Matlab R2009a. During the landing and rotation phase the results showed following characteristics; 1) In medial-lateral and horizontal displacement of the support foot, LKH showed smaller movement than SSJ, but SSJ showed smaller movement than LKH in swing foot. LKH showed bigger movement in medial-lateral axis of COP and vertical axis of COG, but SSJ showed bigger movement in horizontal axis of COP and medial-lateral axis of COG. 2) SSJ showed bigger maximum horizontal and vertical velocity at P1 and P2 than LKH. 3) In the inclination angle of COP and COG, SSJ showed smaller change than LKH, but within medial-lateral tilt of the shoulder, LKH performed rotation motion in horizontal position than SSJ. There was no differences in each force components during rotation, but on landing phase, the results showed a characteristic that SSJ exerted bigger breaking force and vertical force than LKH.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제21권2호
• /
• pp.209-221
• /
• 2018

각은 회전량이라는 양적 측면, 기하적 도형이라는 질적 측면, 평면 또는 선으로 만들어지는 관계적 측면 등의 다면적인 성격을 갖는다. 이 연구는 교수요목기에서 현재 2015 개정 수학과 교육과정에 따른 수학교과서 분석을 통하여 초등수학에서 각의 개념 및 지도 방법을 재검토하였다. 각의 개념을 보는 관점과 학습 계열의 구성이라는 두가지 방향에서 분석하였다. 첫째로, 수학교과서에서 제시하고 있는 각의 정의와 표현 방법, 각의 구성요소를 통하여 수학교과서가 초점을 두고 있는 각의 개념을 분석하였다. 둘째로, 각과 관련된 개념들의 계열을 분석하고, 각의 개념을 도입하는 차시의 과제 및 활동을 통하여 각의 여러 측면들이 어떻게 계열화되고 있는지 교과서 흐름을 따라서 비교 분석하였다. 분석결과 우리나라 수학교과서의 변화에서도 각을 도입하는 방식은 주로 기하적인 도형이나 구성 요소에 대한 학습에 집중하였고 회전량으로서의 측면은 거의 다루지 않았다. 수학교실에서 각 개념이 갖는 기하적 도형의 측면, 회전량의 측면, 점이나 선과 면의 관계적 측면 등을 다양하게 경험하고 폭넓은 각 개념을 형성할 수 있도록 지원하고 연계하여야 할 것이다.

• 대한정형도수물리치료학회지
• /
• 제13권1호
• /
• pp.36-43
• /
• 2007

Purpose: An objective analysis and observations were to be done on hemiplegia patients that are wearing a walking support device, Stroke shoes. Their improvements in walking pace, the reduction of distance between the two knee joint, the increase of curve angle of the knee joint and their steps and the reduction of ankle joint upon swing phase were analyzed using a 20 walking analyzer. Methods: An examination was carried out to see the patients' communication skill and independent walking and then let them walk with the Stroke shoes on to get results before and after wearing it. Simi Reality Motion Systems GmbH (Germany, 2007) was used to analyze the results regarding knee joint and ankle joint angle changes of sagitta plane and coronal plane, stepping distances, distances between the knees and walking pace. Results: 1. The articulation angle of ankle joint during swing phase decreased and knee joint has shown a statistically significant increase in such value(p<0.05). 2. Only knee joint showed a significant increase in articulation angle during heel strike(p<0.05). 3. Knee joint showed a significant increase in articulation angle during toe off(p<0.05). 4. The distance between the two knees as well as their foot steps significantly decreased compared with when Stroke shoes were not worn(p<0.05). 5. Stroke shoes with FES have shown positive effects on the patients in improving their walking styles overall. (p<0.05). Conclusion: There was an improvement in rotation walking pattern by a reduction in the distance between the knees after wearing Stroke shoes with FES. Plantar flexion reduced that occurred in ankle joint during walking and flexion angle increased in knee joint, both of which improved foot drop which was a major problem in hemiplegia patients. Also it is believed that the device will have some positive influences on knee joint stiffening paralysis to aid in improving inefficient walking phases.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.92-99
• /
• 2021

An automatic transmission, which consists of several decks of planetary gear sets, provides multiple speed and torque ratios by actuating brakes and clutches (mechanical friction components) for connecting central members of the planetary gear sets. The gear set consists of the sun gear, the ring gear, and the carrier supporting multiple planet gears with pin shafts. In designing a new automatic transmission, there are many steps to design and analyze: gears, brakes and clutches, shafts, and other mechanical components. Among them, selecting thrust bearings that not only allow the relative rotation of the central members and other mechanical components but also support axial forces coming from them is important; doing so yields superior driving performance and better fuel efficiency. In selecting thrust bearings, the magnitude of axial forces on them is a critical factor that affects their bearing size and performance; its results are systematically related to the direction of the helical angle of each planetary gear set (a geometric design profile). This research presents the effects of the helical angle direction on the axial forces acting on thrust bearings in an automatic transmission consisting of planetary gear sets. A model transmission was built by analyzing kinematics and power flows and by designing planetary gear sets. The results of the axial forces on thrust bearings were analyzed for all combinations of helix angle directions of the planetary gear sets.

• 한국운동역학회지
• /
• 제21권2호
• /
• pp.181-187
• /
• 2011

The purpose of this study was to identify major factors on pirouette in ballet, and especially angle, Center of Mass(CM) & muscle activity aspects. The data were collected by using Motion Analysis System with 12 cameras to analyze kinematic variables with 120 Hz and Electromyography(EMG; 4,000 Hz) & Force Platform(1,000 Hz) to analyze kinetic variables. The subjects of this study were 8 female ballet dancers. The results as follow. First of all, full extension of knee joint and full plantar flexion of ankle joint appeared at the similar point. Secondly, in the rotational phase, total movement of segments in Good motion is smaller than that of Bad motion(in Good motion, head movement 2.70 cm, right shoulder movement 0.72 cm, left shoulder 4.26 cm, left wrist 17.4 mm smaller than Bad motion). Third, CoP distance of Good motion is 11.76 mm, and CoP distance of Bad motion is 11.76 mm, so Good motion is 5.98 mm smaller). Lastly, Pirouette need more retus femur activity than gastrocnemius activity in extention phase and rotation phase of support leg.