Browse > Article
http://dx.doi.org/10.12989/sss.2017.19.4.431

A measuring system for determination of a cantilever beam support moment  

Loktionov, Askold P. (Department of Mechanics and Engineering, Southwest State University)
Publication Information
Smart Structures and Systems / v.19, no.4, 2017 , pp. 431-439 More about this Journal
Abstract
This investigation is aimed to develop a model of experimental-computation determination of a support moment of a cantilever beam loaded with concentrated force at its end including the optimal choice of coordinates of deflection data points and parameters of transformation of deflection data in case of insufficient accuracy of the assignment of initial parameters (support settlement, angle of rotation of the bearing section) and cantilever beam length. The influence of distribution and characteristics of sensors on the cantilever beam on the accuracy of determining the support moment which improves in the course of transition from the uniform distribution of sensors to optimal non-uniform distribution is shown. On the basis of the theory of inverse problems the method of transformation reduction at numerical differentiation of deflection functions has been studied. For engineering evaluation formulae of uncertainty estimate to determine a support moment of a cantilever beam at predetermined uncertainty of measurements using sensors have been obtained.
Keywords
cantilever beam; support moment; inverse problem; numerical differentiation; approximation; sensor; measurement uncertainty; condition number;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Chekushkin, V.V., Mikheev, K.V. and Panteleev, I.V. (2015), "Improving polynomial methods of reconstruction of functional dependences in information-measuring systems", Meas. Tech., 58(4), 385-392.   DOI
2 Cheney, E.W., Kincaid, D. R. (2013), Numerical Mathematics and Computing, Thomson Brooks/Cole, Belmont, California, USA.
3 Dmitrienko, A.G., Blinov, A.V. and Novikov, V.N. (2011), "Distributed smart system for monitoring the state of complex technical objects", Meas. Tech., 54(3), 235-239.   DOI
4 Dung, C.V. and Sasaki E. (2016), "Numerical simulation of output response of PVDF sensor attached on a cantilever beam subjected to impact loading", Sensors, 16(5), 601.   DOI
5 Gere, J.M. and Timoshenko, S.P. (1997), Mechanics of Materials, PWS Pub. Company, Boston, Massachusetts, USA.
6 Haque, M.E., Zain, M.F.M., Hannan, M.A. and Rahman, M.H. (2015), "Building structural health monitoring using dense and sparse topology wireless sensor network", Smart Struct. Syst., 16(4), 607-621.   DOI
7 Huang, H.B., Yi, T.H. and Li. H.N. (2016), "Canonical correlation analysis based fault diagnosis method for structural monitoring sensor networks", Smart Struct. Syst., 17(6), 1031-1053.   DOI
8 Kuchumov, E.V. (2011), "Oscillation dynamics of metal wire sensor elements", Meas. Tech., 54(3), 226-231.   DOI
9 Liew, S.S. and Choo, E.L. (2004), Bending Moment Interpretation Of Structural Element With Measured Deflection Profile; Gue & Partners Sdn Bhd, Kuala Lumpur, Malaysia.
10 Loktionov, A.P. (2007), "A principle of constructing the system for measuring the FV takeoff weight and center-of-mass position on the basis of measurement reduction", Russian Aeronautics, 50(2), 178-185.   DOI
11 Loktionov, A.P. (2013), "Regularization of the lattice time function of the signal in the communication channel", Telecommun. Radio Eng., 72(2), 161-171.   DOI
12 Lu, C., Liu, W., Zhang, Y. and Zhao, H. (2012), "Experimental estimating deflection of a simple beam bridge model using grating eddy current sensors", Sensors, 12(8), 9987-10000.   DOI
13 Mordvinov, A.V. (2010), "Reduction of measurements of total solar flux to a unified scale and uncertainty in estimating its long-term trends", Geomagnet. Aeronomy, 50(8), 933-936.   DOI
14 Ozbey, B., Erturk, V.B., Demir, H.V., Altintas, A. and Kurc, O.A. (2016), "A wireless passive sensing system for displacement/strain measurement in reinforced concrete members", Sensors, 16(4), 496.   DOI
15 Yi, T.H., Zhou, G.D., Li, H.N. and Zhang, X.D. (2015a), "Health monitoring sensor placement optimization for Canton Tower using virus monkey algorithm", Smart Struct. Syst., 15(5), 1379-1392.
16 Yi, T.H., Zhou, G.D., Li, H.N. and Zhang, X.D. (2015b), "Optimal sensor placement for health monitoring of high-rise structure based on collaborative-climb monkey algorithm", Struct. Eng. Mech., 54(2), 305-317.   DOI
17 Zelenkova, M.V. and Skripka, V.L. (2015), "Prospects for Improving Calibration Techniques using a Measurement Reduction Apparatus", Meas. Tech., 58(5), 491-495.   DOI
18 Zhou, G.D., Yi, T.H., Zhang, H. and Li, H.N. (2015), "Optimal sensor placement under uncertainties using a nondirective movement glowworm swarm optimization algorithm", Smart Struct. Syst., 16(2), 243-262.   DOI