• Korean Journal of Medicinal Crop Science
• /
• v.11 no.1
• /
• pp.19-23
• /
• 2003

The optimum extraction condition of pungent component from Zanthoxylum piperitum D.C pericarps by using supercritical fluid extraction(SFE) was investigated. The optimum condition of SFE was $300kg/cm^2$ of pressure, $60\;^{\circ}C$ of extraction temperature, 80% of $CO_2$ fluid, 20% of modifier(methanol) volume and 20 min of extraction time. The extraction efficiency between the classical solvent extraction method and SFE was studied. About 40% of extraction efficiency was improved when SFE was applied.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.475-481
• /
• 1996

A simple, fast, inexpensive method hal been developed to extract organochlorine pesticide spiked in fish tissues by supercritical carbon dioxide. Following static supercritical fluid extraction (SFE), pesticides are collected by rapidly depressurizing the carbon dioxide effluent through a 0.79 mm i.d. metering valve into a capped screw-top tube. Percent recovers of standard organochlorine pesticides mixture (SOPM) increased with the decrease of the extraction temperature at 103 bar. Maximum average percent recovery of SOPM was 98% at $40^{\circ}C/172\;bar$ Average recoveries of SOPM spiked in Pacific cod, flatfish and common squid were 85,74,and 83% respectively at $40^{\circ}C/172\;bar$ Application of supercritical carbon dioxide ectraction offers and attractive alternative to the use of organic solvents for extraction of organochlorine pesticides from fish tissues.

• Food Science and Preservation
• /
• v.13 no.3
• /
• pp.363-368
• /
• 2006

This study was performed to develop flavor materials from Elsholtzia ciliata Hylander with analyzing functionality and aroma profile and to optimize supercritical fluid extraction method and optimum condition. The qualities of water extracts such as total yield total phenolic compound electron donation ability, estragole and L-carvone, were affected by extraction pressure than time. The response variables had significant with pressure than with time and the established polynomial model was suitable(P>0.05) model by Lack-of-Fit analysis. The optimum extraction conditions which were limited of maximum value for dependent variables under experimental conditions based on central composite design were 238 bar and 42 min.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.317-320
• /
• 2004

Physiological effects of curcumin, major yellow-colored pigment in tumeric (Curcuma longa L.), extracted by traditional extracting methods, ethanol and hot-water extractions, and supercritical fluid extraction (SFE) using supercritical carbon dioxide as new extracting method. Antioxidative activity of ethanol extract was higher than those of SFE and hot-water extracts. Results of Ames mutagenicity test on SFE, ethanol, and hot-water extracts revealed no mutagen in the extracts. Antimutagenicity rates of SFE, ethanol, and hot-water extracts against direct mutagen, 2-nitrofluorene (2-NF), were 20.1, 9.3, and 15.2%, respectively. Antimutagenicity rate of SFE extract against TA98 derived from indirect mutagen, 2-acetamidofluorene (2-AF), was 12.2%, whereas none was observed in ethanol and hot-water extracts. Nitrite-scavenging ability of SFE extract was higher than those of ethanol and not-water extracts.

• Applied Biological Chemistry
• /
• v.44 no.3
• /
• pp.197-201
• /
• 2001

Extraction efficiency of ${\beta}-ecdysone$ in Achyranthis radix was investigated using the methods of solvent extraction and supercritical fluid extraction (SFE). The optimum SFE conditions for the analysis of ${\beta}-ecdysone$ in A. radix were 300 atm, $80^{\circ}C$, 100 ml of extraction volume, and 20% ratio of modifier(methanol). As revealed through SFE, detection limit of ${\beta}-ecdysone$ in A. radix was 5 ng and recoveries of ${\beta}-ecdysone$ in A. radix shoots and root were $90.7{\sim}93.5%$ and $77.8{\sim}81.9%$, respectively. Recoveries of ${\beta}-ecdysone$ in A. radix shoots and root through solvent extraction were $76.4{\sim}93.0%$ and $80.6{\sim}93.1%$, respectively. ${\beta}-Ecdysone$ content was determined to be highest at 654.9 ppm in the first year A. radix roots harvested in August.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.615-624
• /
• 2022

In this study, we assessed anti-oxidant activity, anti-microbial, inhibition of biofilm formation and inflammatory factors(nitric oxide, interleukin-6, interleukin-8) inhibitory effect of Perillae semen hydrothermal extract(PSW) and three kinds of Perillae semen supercritical fluid extract(PSSs) extracted by controlling temperature with no variation of pressure. Compared with PSW, PSSs had significantly lower minimal inhibitory concentrations(MICs) against Staphylococcus aureus(S. aureus) and the ability of PSSs to inhibit formation of biofilm was also superior. PSSs reduce the production of inflammatory mediator and inflammatory cytokines significantly compared to PSW. We suggest, therefore, Perillae semen supercritical fluid 45℃ extract which showed the best anti-microbial, inhibition of biofilm formation, and inhibition of inflammatory factors production among the supercritical fluid extracts could be used for protecting patients with atopic dermatitis from pruritus and transepidermal water loss as a functional ingredient from nature.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.6
• /
• pp.447-453
• /
• 2004

Optimal conditions for the supercritical carbon dioxide $(scCO_{2})$ extraction of glycyr­rhizin from licorice (Glycyrrhiza glabra) were investigated, with an emphasis on the types and levels of modifiers. The morphology of the licorice tissue remaining after the $scCO_{2} $ extraction of glycyrrhizin was examined by scanning electron microscopy, coupled with measurements of ab­solute density. Conventional organic solvent extraction was also carried out for purpose of quantitative comparison. At 50 MPa and $60^{circ}C$ glycyrrhizin could not be extracted with pure $scCO_{2}$, while a considerable amount of glycyrrhizin was extracted when water was added to $scCO_{2}$ as a modifier. The highest recovery was found to be about $97\%$ when $70\%$ aqueous methanol was added to $scCO_{2}$ at a concentration of $15\%$. The optimal pressure and temperature for the supercritical fluid extraction of glycyrrhizin were observed to be 30 M Pa and $60^{circ}C$, respectively. Under these conditions, the percentage recovery of glycyrrhizin attained a maximum value of 102.67\pm$ $1.13\%$ within 60 min. Furthermore, in the case of $scCO_{2}$ modified with $70\%$ aqueous methanol, the licorice tissue obtained after extraction was found to be severely de­graded by excessive swelling, and the absolute density of the licorice residues was observed to be the highest.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.615-621
• /
• 2009

In order to optimize the supercritical fluid extraction (SFE) conditions of volatile components from the strawberry, we conducted an evaluation of the sample preparation and SFE operating conditions. The analysis of the volatile components extracted by a variety of sample preparation protocols led to the identification of 30, 26, 30, and 34 volatile components in fresh, freeze-dried, 30% celite and 70% celite treatments, respectively. The 70% celite treatment was the most effective in extracting the volatile components from strawberry via SFE. Analysis of the volatile components extracted by a variety of SFE operating conditions yielded identifications of 34, 35, 34, and 35 volatile components at 3,000 psi (40, $50^{\circ}C$) and 6,000 psi (40, $50^{\circ}C$), respectively. The extraction yield of alcohols and acids, and the total volatile component contents, were highest under conditions of 3,000 psi and $55^{\circ}C$. Volatile components from the strawberry were extracted via SFE, simultaneous steam distillation and extraction (SDE), and solvent extraction (SE). The analysis of the volatile components extracted via different extraction methods resulted in the identification of 56, 34, and 32 volatile components in the SDE, SFE, and SE extracts, respectively. The total volatile component contents identified in the SDE, SFE, and SE extracts were $20.268{\pm}1.144$, $21.627{\pm}1.215$ and $2.476{\pm}0.177\;mg/kg$, respectively. The SFE extract evidenced higher contents of sweet flavors such as 2-methylbutanoic acid, 2-methylpropanoic acid, and hexanoic acid than the SDE and SE extracts. SFE proved to be the most appropriate method for the extraction of fresh volatile components from the strawberry.

• Korean Journal of Food Science and Technology
• /
• v.33 no.3
• /
• pp.307-312
• /
• 2001

Flavor compounds in Neungee (sarcodon aspratus) were extracted by simutaneous distillation and extraction (SDE), supercritical fluid extraction (SFE) and headspace method. Flavor compounds obtained by various extraction methods were analyzed with GC and GC-MS. The funtionality of flavor compounds were determined by aroma extract dilution analysis (AEDA) of GC-ofactometry methods. Fifty one flavor compounds were totally identified in Neungee mushroom. However, the numbers of flavor extracted SDE, SFE and headspace were 33, 26 and 17 respectively. The major flavor compounds obtained by SDE, SFE and headspace were 1-octen-3-ol, 1-octen-3-one, 3-octanone, 2-octen-1-ol, 3-octanol, 1-octanol and benzenealdehyde. As the results of sniffing test, the major flavor compounds were found to be fresh mushroom flavor, wood flavor, refreshing sweet flavor, mold flavor, bitter-mushroom and metalic-flavor.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1057-1061
• /
• 2002

Effects of modifier and soaking on extraction of triterpenoid saponin (glycyrrhizin) from liquorice were examined using supercritical $CO_2(SC-CO_2)$ at 50 MPa, $60^{\circ}C$, and flow rate of 3 mL/min, and glycyrrhizin content was analyzed by HPLC. Additon of undiluted methanol, ethanol or isopropanol as modifier to $SC-CO_2$ had little influence on extraction yield of glycyrrhizin. Soaking process using water increased the extraction yield as the sample to solvent ratio was increased. Addition of 70% methanol, ethanol or isopropanol to $SC-CO_2$ significantly increased the extraction yields, with 70% methanol resulting in the highest yield. When water at 90% (w/w) of sample weight was used for soaking, the extraction yield and rate increased, 70% ethanol-modified $SC-CO_2$ was almost equal to that obtained using 70% methanol.