• Journal of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.28-32
• /
• 1967

The direct acid leaching of domestic Marmatite concentrate at elevated temperatures and pressures was investigated. Almost 100 percent of zinc was extracted from the concentrate liberating free sulfur in 4 hours at $100^{\circ}C$ when the oxygen partial pressure was 5 atm. in sulfuric acid solution. By applying the Arrhenius equation to leach reaction in the range of $60^{circ}$ to $100^{\circ}C$ at the same oxygen partial pressure, 15.7 kcal per mole of activation energy was calculated. At the initial stage of leaching, the rate of reaction increased linearly by increasing temperature and pressure. The concentration of sulfuric acid gave minor effect to leaching velocity in the range of 5 to 20 percent. The particle size should be under 270 mesh for 100 percent extraction of zinc.

• Korean Journal of Agricultural Science
• /
• v.36 no.2
• /
• pp.225-232
• /
• 2009

The ratio of saccharification and formation of furans during the acid hydrolysis of agar with oxalic acid and sulfuric acid were examined base on the contents of the agar and acids. The ratio of saccharification in oxalic acid appeared to be 51~59% somewhat higher than 49~61% of sulfuric acid. Formation of the furans during the acid hydrolysis increased proportional to the contents of agar and acid. The relative formation ratio was high 10~47% for furfural (FUR) and 15~29% for hydroxy-methyl furfural (HMF) in 0.5~1.25% sulfuric acid rather than those of oxalic acid. When comparing the removal efficiency of the furans using an alkali treatment, steam stripping and hydrophobic resins, FUR was eliminated 60% by the alkali treatment, 62~90% by steam stripping and 71~75% by Amberlite XAD4 and 7HP, while HMF was removed to low levels of 10.5%, 4~17% and 13~25%, respectively. The loss of reducing sugar was also observed in process of the removal of furans, and the loss rate was the level of 2~4% in alkali treatment, 11~16% in steam stripping and 7~9% in Amberlite resins.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.2
• /
• pp.87-99
• /
• 2013

Waste paper stands for the major biodegradable organic fraction of most of municipal solid waste. The potential of waste paper for glucose production was investigated in this current work. The pretreatment was accomplished by first subjecting waste paper to disintegration time (30 s), followed by ink removal of disintegrated waste paper using an deinking agent. Concentrated acid hydrolysis of waste paper with sulfuric acid was optimized to maximize glucose conversion. The concentrated acid hydrolysis conditions for waste paper (disintegrated time: 30 s, deinking agent loading : 15 ml) were optimized by using central composite design and response surface methodology. The optimization process employed a central composite design, where the investigated variables were acid concentration (60~80%), loading sulfuric acid (1~5 ml) and reaction time (1~5 h). All the tested variables were identified to have significant effects (p < 0.05) on glucose conversion. The optimum concentrated acid hydrolysis conditions were acid concentration of 70.8%, loading sulfuric acid of 3.2 ml and a reaction time of 3.6 h. This research of concentrated acid hydrolysis was a promising method to improve glucose conversion for waste paper.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.325-327
• /
• 2004

• Bulletin of the Korean Chemical Society
• /
• v.26 no.7
• /
• pp.1125-1128
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3120-3122
• /
• 2009

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.465-469
• /
• 2006

Pre-treatment methods to determine various heavy metal contents in packaging papers were investigated by ICP-ES (Inductively Coupled Plasma Emission Spectrometry) analysis. Pre-treatment methods utilized in this study include dry ashing and decomposition methods ($HNO_{3-}HClO_{4-}HF,\;HNO_{3},\;and\;H_{2}SO_{4-}HNO_{3}$). They were compared with the conventional extraction (water) and migration (3% acetic acid) methods. The five representative heavy metals (Cd, As, Pb, Cr and Hg) were analyzed. For Cd, Hg, and As, the results were below detection limit of the instrument. In case of Cr and Pb, the migration test is considered to be a better method compared to the extraction test, but all pretreated methods showed much higher detection efficiency than the extraction or migration test. However, the detection ratio between the migration test and decomposition methods was different. Among all decomposition methods, the nitric acid - perchloric acid - hydrofluoric acid treatment brought a slightly higher detection value than others, but there was no significant difference among them except sulfuric acid - nitric acid method. Concerning Pb, the sulfuric acid - nitric acid method showed a low detection efficiency compared to other decomposition methods. The sulfuric acid - nitric acid method is, thus, not considered to be a suitable analysis method for Pb in packaging papers.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.6
• /
• pp.475-489
• /
• 2022

The objective of this study was to understand the conversion characteristics of glucose and xylose using the major monosaccharide standards for lignocellulosic biomass. The acid-catalyzed organosolv pretreatment conducted using ethanol was significantly different from the acid-catalyzed process conducted in an aqueous medium. 5-hydroxymethylfurfural (5-HMF), levulinic acid and furfural were produced from glucose conversion. The maximum yield of 5-HMF was 5.5%, at 200℃, when 0.5% sulfuric acid was used. The maximum yield of levulinic acid was 21.5%, at 220℃, when 1.0% sulfuric acid was used. Furfural was produced from xylose conversion and under 0.5% sulfuric acid, furfural reached the maximum yield 48.5% at 210℃. Ethyl levulinate and methyl levulinate were also formed from the glucose standard following the esterification reaction conducted under conditions of the combined conversion method, which proceeded under both ethanol-rich and water-rich conditions.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.226-232
• /
• 2014

In this study, we investigated kinetic model for the acid-catalyzed xylan hydrolysis at temperature $120{\sim}150^{\circ}C$. Also, we analyzed the kinetic parameters for xylose production and furfural decomposition. The hydrolysis of xylan and the degradation of xylose were promoted by high reaction temperature and acid concentration. The optimal hydrolysis condition for the highest reaction rate constants ($k_1$) was different depending on the acid catalysts. Among sulfuric, oxalic and maleic acid, the xylan reaction rate constants ($k_1$) to xylose had the highest value of $0.0241min^{-1}$ when 100 mM sulfuric acid was used at $120^{\circ}C$. However, sulfuric acid induced more xylose degradation compared to oxalic and maleic acid hydrolysis. The activation energy for xylan degradation was the highest when sulfuric acid was used.

• Journal of the Korean Chemical Society
• /
• v.51 no.4
• /
• pp.361-364
• /
• 2007

A one-pot Beckmann rearrangement for the preparation of amides from ketones is described using the silica sulfuric acid under Microwave irradiation. Advantages of this method are regioselectivity with high yields in a simple operation and short reaction time, in which the mole ratio of acid and ketone was 1:2 and it should be greener than the currently used systems.