• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.4
• /
• pp.63-69
• /
• 2003

In discontinuous composite mechanics, shear lag theory is one of the most popular model because of its simplicity and accuracy. However, it does not provide sufficiently accurate strengthening predictions in elastic regime then the fiber aspect ratio is small. This is due to its neglect of stress transfer across the fiber ends and the stress concentrations that exist in the matrix regions near the fiber ends. To overcome this shortcoming, a more simplified shear lag model introducing the stress concentration factor which is a function of several variables, such as the modulus ratio, the fiber volume fraction, the fiber aspect ratio, is proposed. It is found that the modulus ratio($E_f$/$E_m$) is the essential variable among them. Thus, the stress concentration factor is expressed as a function of modulus ratio in the derivation. It is found that the proposed model gives a good agreement with finite element results and has the capability to correctly predict the values of interfacial shear stresses and local stress variations in the small fiber aspect ratio regime.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.20-27
• /
• 2010

In smoke control systems the amount of air supply is almost the same as that of smoke exhaust. This study analyzed the effect of supply air velocity on the smoke exhaust behavior using FDS tool. The results showed that fire plume can be disheveled by the rapid air velocities developed when the air supply inlet is located near the fire plume. Disheveled smoke caused the rapid descent of smoke layer level and the reduced visibility. To increase the efficiency of smoke exhaust systems supply air inlet should be located sufficiently far from the location of the fire plume.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.06a
• /
• pp.90-91
• /
• 2003

Amorphous magnetic materials with competing magnetic interactions are the subject of current interest. Critical behaviour studies have been performed in order to understand the nature of the phase transition at the Curie point (T$\sub$c/) and type of magnetic ordering below the T$\sub$c/. In some cases there exists a temperature interval in which the magnetic system consists of ferromagnetic grains separated by the paramagnetic interlayers. Magnetic properties of nanoparticles embedded in amorphous matrix also are the subject of recent interest. While these materials exhibit excellent soft magnetic properties at room temperature, some of them have been found to be superparamagnetic in the temperature range above the T$\sub$c/ of the matrix. Thus the role of different magnetic phases in the intergrain magnetic coupling can possibly be taken apart in a sufficiently broad temperature range and investigated separately. In particular materials with competing magnetic exchange interactions show characteristics of enhanced magnetoresistance and softer magnetic properties when magnetic nanocrystals are dispersed in amorphous matrix. We expect careful magnetic measurements in the vicinity of T$\sub$c/ would throw some light on magnetic behaviour of above materials. We present here the FMR analysis of Fe$\sub$82/Mn$\sub$8-x/B$\sub$x/Zr$\sub$10/ alloy near the Curie point.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.3
• /
• pp.133-149
• /
• 2004

This study investigates the worksite resources and programs for health promotion services, especially in areas of smoking cessation and acohol-reducing. Health promotion program is important for employees and employers to promote their productivity and enhance their quality of life. To explain the worksite health promotion programs, a three-stage survey model was established and 111 worksites filled up the questionnaire. Stages of the model included the supply status of worksite health programs, attitudes to get rid of health risks, and behavioral intentions to provide health promotion programs in the near future. The results of this study are as follows. First, the facility and personnel for health promotion services are not equipped sufficiently in the middle-sized worksites. Second, provided programs are not good enough in both quantity and quality, because most worksites provide inefficient and low-cost programs. Third, worksites provide the programs such as advertisement, education materials especially in large-sized worksites, but not in middle-sized worksites. Therefore, worksites need to be supported with a public institution for efficient programs and continuing legal and systematic support for middle-sized worksites should be emphasized.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.429-433
• /
• 2004

According to researchers, the influential factors of scouring are generally divided into three factors: the flow conditions, the type and position of structures, and the characteristics of bed materials. In addition, scouring is affected by the 3-dimensional turbulent boundaries, the unsteady flow, the movement of sediment in the scour-hole area, the approach flow velocity and depth, the width of bridge foundation/pier, and the particle size of bed materials. However, it is difficult to estimate the scour depth near bridge piers when all conditions are factored in at once. Therefore, for reasonably accurate estimates of scour depth, it is essential to consider sufficiently the flow force and resisting force for scour. That is, to determine the shear stress concerning the bed material distribution is needed. In this study, the experiments were performed under the condition of a steady state of flow. As a result, scouring occurred at velocity ratios of 0.476,$(V/V_c=0.476)$, and the scour depth was increased linearly as the velocity ratio increased. in addition, the average values of shear stress ratio at zero scouring depth in both rectangular and circular piers were approximately 7$(\tau_c/\tau_{approach})$ and in the case for same size bed particle material. The results of this study can be used for the fundamental material for estimating the scour depth of bed materials.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.3
• /
• pp.152-157
• /
• 2004

Ti-Al-N ($Ti_{75}$ $Al_{25}$ N) and Ti-Al-Si-N ($Ti_{69}$ $Al_{23}$ $Si_{8}$N) coatings synthesized by a DC magnetron sputtering technique were studied comparatively with respect to phase characterization and high-temperature oxidation behavior. $Ti_{69}$ $Al_{23}$ $Si_{ 8}$N coating had a nanocomposite microstructure consisting of nanosized(Ti,Al,Si)N crystallites and amorphous $Si_3$$N_4$, with smooth surface morphology. Ti-Al-N coating of which surface $Al_2$$O_3$ layer formed during oxidation suppressed further oxidation. It was sufficiently stable against oxidation up to about $700^{\circ}C$. Ti-Al-Si-N coating showed better oxidation resistance because both surface Ab03 and near-surface $SiO_2$ layers suppressed further oxidation. XRD, GDOES, XPS, and scratch tests were performed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.1
• /
• pp.42-51
• /
• 1995

In order to establish a theoretical basis for the analyses of transient behaviors in stratified thermal storage tanks, analytical approaches to an improved one-dimensional model are made. In the present model the storage tank is treated as a finite region with an adiabatic tank exit, whereas it has been considered as a simple semi-infinite region previously. Application of the Laplace transformation and the Inversion theorem to the governing equations makes it possible to obtain an exact infinite-series solution, which is convergent only at sufficiently large time. Accordingly a complementary solution which is available for short times, i.e., the time range of this study is sought by an approximate method. The approximate solution which is rigorously validated through the examination of neglected terms in the solution procedure agrees quite well with the exact one. Moreover, it is simpler to use and more convenient to interpret the physical meaning of the solution. Comparison of the present solution with the previous ones shows relatively large difference near the tank bottom, which results from the more realistic boundary condition adopted in the present model. Some representative results by the approximate solution including effects of the Peclet number on temperature distrbutions are illustrated to show the utility of this study. In consequence, it is expected that the present results based on the improved model replace the foregoing ones as a new theoretical reference for studies of thermal stratification fields.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.6
• /
• pp.403-410
• /
• 2016

This paper proposes a robust image-based visual servoing scheme using a nonlinear observer for a monocular eye-in-hand manipulator. The proposed control method is divided into a range estimation phase and a target-tracking phase. In the range estimation phase, the range from the camera to the target is estimated under the non-moving target condition to solve the uncertainty of an interaction matrix. Then, in the target-tracking phase, the feature point uncertainty caused by the unknown motion of the target is estimated and feature point errors converge sufficiently near to zero through compensation for the feature point uncertainty.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.5
• /
• pp.17-26
• /
• 1984

This paper reports the design methods and fabrication processes developed for a TV-lF SAW filter. The windowing method, the frequency sampling method, and the time sampling method were studied and compared to obtain a satisfactory initial impulse response. To obtain high attenuation near the trap frequency, diffraction effects were compensated. The 4fo sampling technique was used for avoiding multiple reflections at finger edges and obtaining an asymmetrical frequency response, and effective photolithographic techniques were used for electrode fingers with 11.2$\mu$ width. The developed filter is of sufficiently small size to be cost-effective and satisfies the industry specifications required for mass production.

• The Korean Journal of Air & Space Law and Policy
• /
• v.25 no.1
• /
• pp.237-259
• /
• 2010

This paper first gives a brief overview of the history of space law making in the international geopolitical context and recalls some of the main principles as elaborated in the framework of the United Nations. Next, several topics are discussed that will require the attention of space lawyers in the near future. They are the International Space Station, space debris, exploitation of space resources, space tourism, private property rights in space, and militarization and weaponization of space. The paper raises some questions in each of these areas that need to be addressed and concludes that the general legal framework for space activities under public international law as contained in the UN treaties is in place, and is sufficiently general and flexible to enable and encourage states to carry out space activities in an orderly manner. However, as demonstrated by the examples discussed in the paper, the time has come for the international community to agree on the further development of these general principles, starting perhaps with space debris, imminent 'new' uses of space such as space tourism, or some of the 'age old' issues such as the weaponisation of outer space that will continue to require our attention and vigilance. Whether such rules can be in the form of non binding guidelines, codes of conduct and the like, or should be embodied in solid legal instruments creating rights and obligations remains to be seen.