• Journal of the Korean Wood Science and Technology
• /
• v.33 no.2 s.130
• /
• pp.65-71
• /
• 2005

This study was performed to understand the interaction between Ophiostomataceae and basidiomycetes fungi during cultures, and whether the basidiomycetes fungi inhibit the growth and decolorize dark pigments of blue staining fungi. The conjoint cultivation was studied on 2% malt extract agar. The ability of basidial cultures to decolorize dark pigments of ophiostomatoid fungi was the main characteristics estimated during this study. More than half of basidial cultures were characterized by deadlock interaction with blue staining fungi. In the dual cultures, where basidial partners were presented by Agaricus bisporus(64), Laetiporus sulphureus(L01/89), Trametes versicolor(09) and unknown fungus(02), antagonism was found at the phase of primary contact of colonies. Replacement interaction resulted usually in decreasing dark colour of substrate was observed for 11 basidial cultures that were belonging mainly to white-rot fungi. Among them Abortiporus biennis(123), Antrodiella hoehnelii(S28/91), Bjerkandera fumosa (137), and Gleophyllum odoratum(124) were characterized by the absence of deadlock-phase: they began to grow over dark colonies of their partners just after primary contact. Basidiomycetes did not affect strongly the pigments of Ceratocystis spp. and Leptographium sibirica isolates, but completely decolorized colonies of Ophiostoma ips and to a smaller degree Ophiostoma minus. Antrodiella hoehnelii(S28/91), Bjerkandera fumosa(137), Gleophyllum odoratum(124) and Trametes versicolor(B18/91) cultures were found to be the most active in decreasing dark color of blue staining fungi colonies. The cultures were recommended for further development as agents of biopulping of wood chips and bio-control of blue stain in woods.

• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.683-688
• /
• 2013

Candidate coating materials for re-usable metallic nuclear fuel crucibles, TaC, TiC, ZrC, $ZrO_2$, and $Y_2O_3$, were plasmasprayed onto a niobium substrate. The microstructure of the plasma-sprayed coatings and thermal cycling behavior were characterized, and U-Zr melt interaction studies were carried out. The TaC and $Y_2O_3$ coating layers had a uniform thickness, and high density with only a few small closed pores showing good consolidation, while the ZrC, TiC, and $ZrO_2$ coatings were not well consolidated with a considerable amount of porosity. Thermal cycling tests showed that the adhesion of the TiC, ZrC, and $ZrO_2$ coating layers with niobium was relatively weak compared to the TaC and $Y_2O_3$ coatings. The TaC and $Y_2O_3$ coatings had better cycling characteristics with no interconnected cracks. In the interaction studies, ZrC and $ZrO_2$ coated rods showed significant degradations after exposure to U-10 wt.% Zr melt at $1600^{\circ}C$ for 15 min., but TaC, TiC, and $Y_2O_3$ coatings showed good compatibility with U-Zr melt.

• Journal of Animal Science and Technology
• /
• v.65 no.2
• /
• pp.387-400
• /
• 2023

Ruminal protozoa, especially entodiniomorphs, engulf other members of the rumen microbiome in large numbers; and they release oligopeptides and amino acids, which can be fermented to ammonia and volatile fatty acids (VFAs) by amino acid-fermenting bacteria (AAFB). Studies using defaunated (protozoa-free) sheep have demonstrated that ruminal protozoa considerably increase intraruminal nitrogen recycling but decrease nitrogen utilization efficiency in ruminants. However, direct interactions between ruminal protozoa and AAFB have not been demonstrated because of their inability to establish axenic cultures of any ruminal protozoan. Thus, this study was performed to evaluate the interaction between Entodinium caudatum, which is the most predominant rumen ciliate species, and an AAFB consortium in terms of feed degradation and ammonia production along with the microbial population shift of select bacterial species (Prevotella ruminicola, Clostridium aminophilum, and Peptostreptococcus anaerobius). From an Ent. caudatum culture that had been maintained by daily feeding and transfers every 3 or 4 days, the bacteria and methanogens loosely associated with Ent. caudatum cells were removed by filtration and washing. An AAFB consortium was established by repeated transfers and enrichment with casamino acids as the sole substrate. The cultures of Ent. caudatum alone (Ec) and AAFB alone (AAFB) and the co-culture of Ent. caudatum and AAFB (Ec + AAFB) were set up in three replicates and incubated at 39℃ for 72 h. The digestibility of dry matter (DM) and fiber (NDF), VFA profiles, ammonia concentrations, pH, and microscopic counts of Ent. caudatum were compared among the three cultures. The co-culture of AAFB and Ent. caudatum enhanced DM degradation, VFA production, and Ent. caudatum cell counts; conversely, it decreased acetate: propionate ratio although the total bacterial abundance was similar between Ec and the Ec + AAFB co-culture after 24 h incubation. The ammonia production and relative abundance of C. aminophilum and P. anaerobius did not differ between AAFB alone and the Ec + AAFB co-culture. Our results indicate that Ent. caudatum and AAFB could have a mutualistic interaction that benefited each other, but their interactions were complex and might not increase ammoniagenesis. Further research should examine how such interactions affect the population dynamics of AAFB.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.4
• /
• pp.165-169
• /
• 2004

This paper reports a miniaturized conductor-backed CPW (CBCPW) bandpass filter based on a thin film polyimide layer coated on CMOS-grade silicon. With a 20 ${\mu}{\textrm}{m}$-thick polyimide interface layer and back metallization on the CMOS-grade silicon, the interaction of electromagnetic fields with the lossy silicon substrate has been isolated, and as a result a low-loss and low-dispersive CBCPW line has been obtained. Measured attenuation constant at 20 GHz is below 1.2 ㏈/cm, which is compatible with the CPW on GaAs. In addition, by using the proposed CBCPW geometry, miniaturized BPF for Ku band application is designed and its measured frequency response shows excellent agreement with the predicted value with validating the performances of the proposed CBCPW geometry for RFIC interconnects and filter applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.6 no.1
• /
• pp.51-57
• /
• 1981

Carriers moving in a semiconductor can impart gain or loss to an acousic wave traveling through Piezo-electric materials. In this paper, surface a coustic wave amplifiers, which employ the interaction between carriers drifting in a semiconduct or film and electic fields accompanying a Rayleigh wave propagating on a Piezoelectric substrate, are described. The effect of various electromagnetic boundary condition on th propagation of surface waves in Piezoelectrics is considered. An expression for the dependence of surface wave velocity on electic boundary conditions is derived. Calculations show that, for properly prepared material, significant amplification is expected up to the microwave frequencies. At high frequencies, gain is reduced because electro diffusion smooths out the electron bucning necessary for amplification.

• Applied Science and Convergence Technology
• /
• v.24 no.5
• /
• pp.151-155
• /
• 2015

The interfacial electronic structure between zinc phthalocyanine (ZnPc) and aluminumdoped zinc oxide (AZO) substrates has been evaluated by ultraviolet photoemission spectroscopy and angle-dependent x-ray absorption spectroscopy to understanding the molecular orientation of a ZnPc layer on the performance of small molecule organic photovoltaics (OPVs). We find that the ZnPc tilt angle improves the ${\pi}-{\pi}$ interaction on the AZO substrate, thus leading to an improved short-circuit current in OPVs based on phthalocyanine. Furthermore, the molecular orientation-dependent energy level alignment has been analyzed in detail using ultraviolet photoemission spectroscopy. We also obtained complete energy level diagrams of ZnPc/AZO and ZnPc/indium thin oxide.

• Journal of Sensor Science and Technology
• /
• v.9 no.3
• /
• pp.208-212
• /
• 2000

A protein based vision biomembrane was fabricated by adsorbing bacteriorhodopsin into electrochemically polymerized polypyrrole film substrate mainly through strong electrostatic interaction. The immobilized bacteriorhodopsin on the polypyrrole film was demonstrated by SEM and SRET. The light signal transducing function from the bacteriorhodopsin which was adsorbed into Polypyrrole film was evaluated by electroretinogram(ERG). A wave form analysis of the electroretinogram indicated that the adsorbed bacteriorhodopsin retained its activity and light signal was obtained from the protein for at least one month.

• Rapid Communication in Photoscience
• /
• v.3 no.4
• /
• pp.76-78
• /
• 2014

Fluorescent nucleic acids were prepared utilizing the polymerase extension (PEX) reaction to incorporate fluorescent molecules. 2'-Deoxyuridine triphosphate (dUTP) derivatives possessing pyrene molecules as fluorophores were synthesized using the aqueous-phase Sonogashira coupling between 5-Iodo-dUTP and acetylene-linked pyrene molecules. The incorporation of the pyrene (Py)-labeled deoxyuridine triphosphates (PyU) into DNA by polymerase was evaluated by polyacrylamide gel electrophoresis, demonstrating that the PyU can work as a good substrate for the PEX reaction. The fluorescent properties of the functionalized DNA prepared by the PEX reaction were characterized by steady-state fluorescence measurements. The Py-conjugated DNA showed typical emission spectra of the pyrene, and the DNA with two pyrene molecules connected to each other by a diethylene glycol linker exhibited a broadened emission attributed to the electronic interaction between the Py molecules.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.479-486
• /
• 2012

Two of fundamental approaches that can be used to understand ion-solid interaction are Monte Carlo (MC) and Molecular Dynamic (MD) simulations. For the simplicity of simulation Monte Carlo simulation method is widely preferred. In this paper, basic consideration and algorithm of Monte Carlo simulation will be presented as well as simulation results. Sputtering caused by incident ion beam will be discussed with distribution of sputtered particles and their energy distributions. Redeposition of sputtered particles that are experienced refraction at the substrate-vacuum interface additionally presented. In addition, reflection of incident ions with reflection coefficient will be presented together with spatial and energy distributions. This Monte Carlo simulation will be useful in simulating and describing ion beam related processes such as Ion beam induced deposition/etching process, local nano-scale distribution of focused ion beam implanted ions, and ion microscope imaging process etc.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1986.12a
• /
• pp.523.1-523
• /
• 1986

To extend the spectrum of enzyme utilization in the organic solvent system, C. rugosal lipase was selected as a model enzyme because its substrate is soluble to organic solvent. One of the serious disadvantages in this system was the deactivation of the lipase. The pattern of lipase deactivation was the biphasic model. The activation energies for the deactivation were 14.05${\times}$10$^4$ KJ/Kg mole in the first phase and 3.59 ${\times}$ 10$^4$ KJ/mole in the second phase. The several factors were studied for their influences on the pattern of deactivation. Iso-octane as organic solvent influenced more on the first phase than the second phase. Urea as the reagent affecting boty hydrophobic interaction and hydrogen bond of enzyme also influencea more on the first phase. And the optimum pH for the activity was not correlated to that of the stability.