• 한국해안해양공학회지
• /
• 제19권6호
• /
• pp.565-573
• /
• 2007

타원형 수중천퇴가 있는 지형을 통과하며 변형하는 파랑을 실험한 Vincent and Briggs(1989)의 불규칙파 실험조건을 수치모의하여 파랑과 흐름의 상호작용 효과를 연구하였다. 수치모의를 위해 SHORECIRC(흐름모형)와 REF/DIF S(파랑모형)를 결합한 모형과 파랑과 흐름을 동시에 계산하는 FUNWAVE를 이용하였다. 이 수치모의로부터 수중 천퇴상에서 발생된 쇄파류는 수중천퇴후면의 파 집중현상을 방해하고, 파랑을 천퇴중심축의 바깥쪽으로 굴절시켜, 파고를 상대적으로 감소시키는 역할을 하는 것을 확인할 수 있었다. 결합모형의 수치모의 결과는 쇄파류의 영향을 고려하지 않는 파랑모형만의 결과보다 실험치와 더 일치하였으며, FUNWAVE를 이용한 수치모의도 실험결과와 잘 일치하였다. 이는 파랑쇄파류의 파랑변형에 미치는 역할의 중요성을 확인시켜주는 것이다.

• 생태와환경
• /
• 제38권1호통권110호
• /
• pp.30-44
• /
• 2005

팔당호 연안대의 수생식물상과 식생을 파악하기 위하여 2003년 4월부터 2004년 4월까지 9곳의 조사 지점을 선정하여 선방형구법을 이용하여 조사하였다. 팔당호 연안대에는 128종류의 관속식물이 생육하고 있는 것으로 조사되었고, 이중 수생식물은 38종류였다. 수생식물의 경우 정수식물이 21종류로 가장 많았고, 침수식물은 8종류였고, 침수식물 증류수는 이전 조사보다 감소한 것으로 파악되었다. 팔당호 주요 식생은 애기부들, 줄, 갈대가 우점하는 정수식물대로 파악되었고, 특히 두물머리, 광동교근처에 넓게 정수식물대가 넓게 발달하였다. 귀화식물은 11종류가 분포하고 있었으나, 출현 빈도는 상대적으로 높았다. 팔당호 연안대에 분포하는 식물의 출현 빈도를 조사 지점을 기준으로 살펴보면, 조사 지점당 수생식물은 2.7종류, 습생식물은 2.5종류, 육지식물은 1.8종류로 파악되었고, 수직대상분포 식생이 팔당호 연안대에서 발견되었다. 이러한 조사 결과는 팔당호 연안대가 수생태계의 전형적인 특성들을 지니고 있는 것으로 풀이된다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1995년도 특별강연 및 추계학술발표 개요집
• /
• pp.214-217
• /
• 1995

In order to investigate characteristics of surface fatigue crack propagation from a pit shaped surface defect which frequently exists near weld joints, SS400 steel with thickness of 12mm, which generally used for structure members, was submerged-arc welded with butt type and machined for both surface. The weld joints were devided into 5 regions, weld metal, boundary between heat affected zone (HAZ), HAZ, boundary between HAZ and base metal, and base metal. Specimens from each region were machined for a pit shaped initial surface defect with aspect ratio of 2. characteristics of surface fatigue crack por pagation from the defect under the same loading condition were compared and discussed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.178-179
• /
• 2014

Corrosion is very serious problem in RC structure under ocean environment. There is no enough experiment information using the reinforced geo polymer concrete applied by electo chemical protection system. Three condition, such as tidal zone, submerged zone and crack were simulated to geo polymer specimen. Corrosion rate and natural electrode potential were measured through accelerated test. Anti corrosion property of geo polymer was better than OPC regardless of specimen condition and applied time.

• 열처리공학회지
• /
• 제7권1호
• /
• pp.35-43
• /
• 1994

For the purpose of studying the change of mechanical properties of weld parts, shielded metal are welding, one-pole and two-pole submerged arc welding were accomplished weldability on $60kg/mm^2$ quenched and tempered high strength steel. Charpy impact values of the weld metal in welded parts by SMAW and SAW were lower than those of the heat affected zone and increased in order of bond, coarsened, refined and carbon spheroidized regions in the heat affected zone. Grain size of prior austenite or M-A constituent did not significantly affect toughness of welded parts, but precipitated carbide films which forms at the grain boundaries or within matrix and volume fraction of pearilte were most important factor for toughness.

• 한국기후변화학회지
• /
• 제7권3호
• /
• pp.269-282
• /
• 2016

Watershed area can be submerged due to constructions and management of dams, and these change can impact not only on ecosystem and environment of river basin area but also on local climate. This study is conducted to construct and classify climate zones of Andong Dam watershed where the area is submerged due to the construction of the dam. By applying Principal Components Analysis (PCA) and Getis-Ord $Gi^*$ statistics, three climate zones were classified for the result. Each zone was then analyzed and validated with climatic and geological features including topography, land cover, and forest type map. As a result of the analysis, there was a difference in temperature, elevation, precipitation and tree species distribution among the zones. Also, an analysis of land cover map showed that there were more agricultural land near Andong Reservoir. This study on the climatic classification is considered to be useful as the basis for decision-making or policy enforcement regarding ecosystem, environmental management or climate change response.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.528-536
• /
• 2002

As one step for the safety performance of LNG storage tank, the change in fracture toughness within the X-grooved weld heat-affected zone (HAZ) of newly developed 9% Ni steel, which was submerged arc (SA)-welded, was investigated. Both crack initiation fracture toughness and crack arrest fracture toughness were evaluated by the crack tip opening displacement (CTOD) tests and compact crack arrest (CCA) tests. As the evaluated region approached the fusion line, each test result shorted different tendency, that is, crack initiation toughness decreased while crack arrest toughness increased. The results were discussed through the observation of the microstructural change.

• 대한토목학회논문집
• /
• 제5권1호
• /
• pp.75-81
• /
• 1985

정지상태의 수역에서 연직상향으로 방류(放流)되는 평면부력(平面浮力)?의 발달과정(發達過程)흐름영역(領域)의 거동이 질량(質量), 운동량(運動量) 및 추적물보존(追跡物保存)의 적분방정식(積分方程式)에 의하여 해석된다. 이 해석은 밀도(密度)후르드수(數)와 핵(核)에 대한 퍼짐비 및 발달과정(發達過程)흐름영역(領域)의 길이를 포함한다. 발달과정(發達過程)흐름영역(領域)의 끝에서 중심선속도(中心線速度)는 특히 낮은 밀도(密度)후르드수(數)에서 부력(浮力)의 영향을 크게 받는다. 이 결과는 발달(發達)된 흐름영역(領域)의 해석(解析)에 필요한 초기조건(初期條件)을 제공한다.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.67-73
• /
• 2002

In an attempt to evaluate the feasibility of friction stir welding(FSW) for joining carbon steels, microstructures and mechanical properties of friction stir welded carbon steels with different grain structures were investigated. In comparison of O-type stir zone(SZ) appeared in various aluminium alloys, configuration of SZ in friction stir welded carbon steels displayed U-type. Plastically deformed pearlite band structure was identified to surround the SZ, indicating the existence of so-called thermo-mechanically affected zone(TMAZ). However, the TMAZ of carbon steels was much narrower than that of Al alloys. The microstructures of both stir zone and TMAZ revealed bainite matrix in a conventional carbon steel for shipbuilding, while, in the same region, ferrite matrix microstructures were formed in a low carbon fine grained steel. The conventional carbon steel showed superior stirring workability to that of the fine grained carbon steel. The yield and tensile strength of the friction stir welded joints were comparable to those of the base metals, and the elongation in welded joints demonstrated excellent ductility. Absorbed energy in SZ of the fine grained carbon steel was ten times higher than that obtained from conventional submerged arc weld metal of the same steel. Based on these results, the application FSW to carbon steels was found to be feasible.

• 한국표면공학회지
• /
• 제51권5호
• /
• pp.316-324
• /
• 2018

Harsh seawater environment is subdivided into marine atmosphere, splash zone, tidal zone, submerged zone and bottom of sea depending on the exposed part. Since corrosion rate depends on the conditions of the exposed parts, proper protection and maintenance for each parts are essential for long-term use of steel structures in seawater environment. For steel structures which were installed in Shiwha Lake, a special maintenance system is required to guarantee its long-term durability and safety. As the tidal power plant has recently been operated, the salinity has risen due to the rapid influx of seawater upstream into Sihwa Lake and the corrosion tendency of the structure is variable according to the water level fluctuation. In this study, corrosion properties of steel structures under water level fluctuation was evaluated by corrosion rate measurement, visual inspection and natural potential measurement and their durability and life management were discussed in view of the effect of variation in of seawater level fluctuations in Shihwa Lake.