• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3659-3664
• /
• 2023

The electrochemical behavior of dissolved hydrogen (H₂) was investigated at a Pt electrode in a high temperature LiOH-H₃BO₃ solution. The diffusion current of the H₂ oxidation was proportional to the concentration of the dissolved H₂ as well as the reciprocal of the temperature. In the polarization curve, a potential region in which the oxidation current decreases despite an increase in the applied potential between the H₂ oxidation and the water oxidation regions was observed. This potential region was interpreted as being caused by the formation of a Pt oxide layer. Using the properties of the Cl^- ion that reduces the growth rate of the Pt oxide layer, it was confirmed that there is a correlation between the Cl^- ion concentration and the transient current of the H₂ oxidation.

• 자원리싸이클링
• /
• 제32권3호
• /
• pp.26-37
• /
• 2023

바나듐광 염배소 산물의 수침출 용액으로부터 바나듐을 회수하기 위해서는 수용액의 pH 와 온도 조절 과정이 필요한데, 이 과정에서 알루미늄-바나듐, 소듐-바나듐 공침이 일어나면서 바나듐 회수율에 큰 영향을 미친다. 그러므로 본 연구에서는 바나듐을 회수하기 위한 암모늄메타바나데이트[NH₄VO₃], 암모늄폴리바나데이트[(NH₄)₂V₆O₁₆·H₂O] 침전 과정에서 바나듐 함유 수용액 특성이 이들의 침전에 미치는 영향을 검토하여 바나듐 회수율을 높일 수 있는 회수공정에 대하여 알아보았다. 바나듐 함유 수침출 용액으로부터 암모늄메타바나데이트를 침전시키기 위하여 수용액 pH 9로 조절하는 과정에서 수용액의 알루미늄 함량은 바나듐의 손실에 많은 영향을 미치며, 따라서 수침출 과정에서 알루미늄 침출을 최소화 하는 과정이 필요하다. 수용액 pH 9, 상온에서 바나듐 함량 대비 3당량의 염화암모늄 첨가에 의하여 수용액에 존재하는 바나듐의 약 99% 이상을 암모늄메타바나데이트를 침전회수하였다. 또한 수용액 pH 9로 조절하는 과정에서 발생하는 알루미늄-바나듐 공침전물로부터 암모늄폴리바나데이트 침전를 위해서는 pH 2.5 수용액에 용해시키고, 수용액의 소듐 함량은 2,000 mg/L이하로 조절되어야 한다. 바나듐 함량 2,200 mg/L, 소듐 함량 1,875 mg/L인 수용액 pH 2.5, 온도 95℃ 이상에서 바나듐 함량 대비 약 3당량의 염화암모늄 첨가에 의하여 98% 이상의 암모늄폴리바네데이트를 침전회수하였다. 이와 같은 일괄공정 조건에서 수침출용액의 바나듐 함량 대비 약 91.2% 이상의 바나듐을 암모늄(메타, 폴리)바나데이트로 침전회수하였다.

• 대한화장품학회지
• /
• 제47권3호
• /
• pp.227-235
• /
• 2021

자외선 및 블루영역 차단 기능을 갖는 화장품의 원료로 사용되기 위한 박막 판형의 ZnO 및 Fe₂O₃ 성분을 포함하는 인공 칼라민 세라믹 분말 소재를 합성하였다. 20 : 1에서 50 : 1 범위의 높은 종횡비를 가지는 (0001)면의 판형 ZnO 세라믹 분말 소재는 아연공기전지로 전력 생산한 후에 회수한 전해질을 출발 물질로 하여 징크아세테이트와 소듐시트레이트 혼합 용액에서 중화반응을 통한 석출로 합성하였다. 아이언 클로라이드 용액의 첨가량을 증가시키는 방법으로 인공 칼라민 세라믹 분말 내의 Fe₂O₃ 함량을 높일 수 있었으며, 이 경우 자외선뿐만 아니라 가시광선의 블루 영역을 일부 흡수하였다. 포타슘 아세테이트 용액을 첨가시킬 경우에는 Zn(OH)₄^2- 음이온의 분해를 촉진하여 (0001) 면 위에 수직 방향으로 격벽 형태로 성장한 박막을 얻을 수 있었는데, 이 경우 자외선을 흡수할 수 있는 기회가 증가하면서 자외선 흡수율이 증가하였다. 아이언 클로라이드 용액과 포타슘 아세테이트 용액의 첨가량을 함께 조절하면 박막 판형의 인공 칼라민 세라믹 분말의 조성 및 형상을 최적화시킬 수 있어서 화장품 제형을 진행할 경우 블루영역의 광투과도가 크게 감소하였다.

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.186-191
• /
• 2011

[ $YBa_2C_3O_{7-x}$ ]films were fabricated on a $SrTiO_3$ (100) substrate using a trimethylaceate propionic acid (TMAP)-based MOD process by controlling the precursor solution viscosity, firing temperature, and by using various coatings. The viscosity of the precursor solution was controlled by the addition of Xylenes. The films were heat treated with different temperatures from 750 to $800^{\circ}C$. c-axis oriented films were obtained. After adding 9 ml of Xylene into the precursor solution, the $T_c$ of the YBCO film, which was coated 2 times and heat treated at $800^{\circ}C$, was 86 K and the measured $J_c$ was above 2.5 MA/$cm^2$ at 77 K in a zero-field.

• 대한수학회지
• /
• 제58권3호
• /
• pp.703-722
• /
• 2021

Let G = (V, E) be a connected locally finite and weighted graph, ∆_p be the p-th graph Laplacian. Consider the p-th nonlinear equation -∆_pu + h|u|^p-2u = f(x, u) on G, where p > 2, h, f satisfy certain assumptions. Grigor'yan-Lin-Yang [24] proved the existence of the solution to the above nonlinear equation in a bounded domain Ω ⊂ V. In this paper, we show that there exists a strictly positive solution on the infinite set V to the above nonlinear equation by modifying some conditions in [24]. To the m-order differential operator 𝓛_m,p, we also prove the existence of the nontrivial solution to the analogous nonlinear equation.

• 한국전기전자재료학회논문지
• /
• 제31권4호
• /
• pp.226-230
• /
• 2018

Pure $BiFeO_3$ (BFO) and codoped $Bi_{0.9}A_{0.1}Fe_{0.975}Zn_{0.025}O_{3-{\delta}}$ (A=Eu, Dy) thin films were prepared on Pt(111)/Ti/$SiO_2$/Si(100) substrates by chemical solution deposition. The remnant polarizations (2Pr) of the $Bi_{0.9}Eu_{0.1}Fe_{0.975}Zn_{0.025}O_{3-{\delta}}$ (BEFZO) and $Bi_{0.9}Dy_{0.1}Fe_{0.975}Zn_{0.025}O_{3-{\delta}}$ (BDFZO) thin films were about 36 and $26{\mu}C/cm^2$ at the maximum electric fields of 900 and 917 kV/cm, respectively, at 1 kHz. The codoped BEFZO and BDFZO thin films showed improved electrical properties, and leakage current densities of 3.68 and $1.21{\times}10^{-6}A/cm^2$, respectively, which were three orders of magnitude lower than that of the pure BFO film, at 100 kV/cm.

• Journal of Computational Design and Engineering
• /
• 제2권2호
• /
• pp.105-112
• /
• 2015

Product Lifecycle Management (PLM) ranges from design concepts of products to disposal. In this paper, we focus on the production planning phase in PLM, which is related to process planning and production scheduling and so on. In this study, key decisions for the creation of production plans are defined as production-planning attributes. Production-planning attributes correlate complexly in production-planning problems. Traditionally, the production-planning problem splits sub-problems based on experiences, because of the complexity. In addition, the orders in which to solve each sub-problem are determined by priorities between sub-problems. However, such approaches make solution space over-restricted and make it difficult to find a better solution. We have proposed a representation of combinations of alternatives in production-planning attributes by using Zero-Suppressed Binary Decision Diagrams. The ZDD represents only feasible combinations of alternatives that satisfy constraints in the production planning. Moreover, we have developed a solution search method that solves production-planning problems with ZDDs. In this paper, we propose an approach for managing solution candidates by ZDDs' network for addressing larger production-planning problems. The network can be created by linkages of ZDDs that express constraints in individual sub-problems and between sub-problems. The benefit of this approach is that it represents solution space, satisfying whole constraints in the production planning. This case study shows that the validity of the proposed approach.

• 한국전기전자재료학회논문지
• /
• 제26권11호
• /
• pp.821-825
• /
• 2013

Effect of multi-stacked layer (MSL), 0.1 mol (M) and 0.3 mol (M) hafnium oxide ($HfO_2$) alignment layers were fabricated via a solution-process for LCs orientation. The solutions were spin-coated and annealed in a furnace. MSL consists of three sub-layers using 0.1 M solution, mono-layer (ML) is composed of 0.3 M $HfO_2$ solution. Then ion-beam irradiation was treated with 1.8 keV for 2 min. $HfO_2$-based LC cells were investigated through photographs, pre-tilt angle using crystal rotation method, X-ray photoelectron spectroscopy (XPS) measurement, and surface roughness using atomic force microscopy(AFM) for their characteristic research. Good LC orientation characteristics were observed on MSL $HfO_2$ surface. The LC alignment mechanism on MSL $HfO_2$ and ML $HfO_2$ surfaces was attributed to van der Waals (VDW) interaction between the LC molecular and substrate surface.

• 한국세라믹학회지
• /
• 제40권2호
• /
• pp.153-158
• /
• 2003

Photosensitive sol solution을 이용한 self pattern된 박막은 photoresist/dry etching process에 비해 박막의 제조과정이 간단하다는 장점을 가지고 있다. 이 연구에서는 강유전성 메모리소자의 산화물 전극재료로 사용되고 있는 La$_{0.5}$Sr$_{0.5}$CoO$_3$(LSCO)극 photosensitive sol solution을 이용하여 spin coating법으로 제조하였으며 출발원료는 La-2methoxyethoxide, Sr-ethoxide, Co-2methoxyethoxide를 사용하였다. LSCO gel 박막에 UV 노광시간을 증가시킴에 따라 M(metal)-O-M 결합이 생성되면서 metal $\beta$-diketonate의 UV 흡수 피크 강도는 감소되었고 LSCO gel 박막에 UV조사에 따른 용해도 차이가 생기면서 fine patterning 을 얻을 수 있었다. 68$0^{\circ}C$ 이상의 온도로 대기 중에서 열처리된 LSCO 박막은 perovskite 상을 나타내었고 74$0^{\circ}C$에서 가장 낮은 비저항값(4$\times$10￣$^3$Ωcm)을 얻을 수 있었다.

• Journal of Electrochemical Science and Technology
• /
• 제11권4호
• /
• pp.368-378
• /
• 2020

In the paper, corrosion behavior of T91 steel in different concentrations of NaHSO₃ solution was studied in combination with scanning electron microscope (SEM) and electrochemical measurements. The results showed that the steel exhibited active anodic dissolution characteristics in the solution, and NaHSO₃ concentration affected both cathodic and anodic behaviors. The steel surface was covered by intact corrosion products in the solutions, but the compactness and mechanical properties of the corrosion products degraded with the increase of NaHSO₃ concentration. In low-concentration NaHSO₃ solution the steel tended to undergo uniform corrosion with slight corrosion pits, but its corrosion mode gradually transited to localized corrosion as the NaHSO₃ concentration increased. The mechanical property degradation of the corrosion products caused by sulfur compounds and the pH decrease of the solution are the important factors to accelerating its corrosion process.