• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.201.2-201.2
• /
• 2016

$Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrite powders were prepared by self-propagating high temperature synthesis followed by classified by ultrasonic wet-magnetic separation method to get nano-sized particles with high purity. The $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrites were well formed by using several powders like iron, nickel oxide, zinc oxide and magnesium oxide at 0.1 MPa of oxygen pressure. The ultrasonic wet-magnetic separation of pre-mechanical milled ferrite powders produced the powders with average size of $3.7-0.8{\mu}m$. The addition of a surfactant during the separation process improved productivity more than twice. The coercive force, maximum magnetization and residual magnetization of the $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ nano-powders with 810 nm size were 45.89 Oe, 53.92 emu/gOe, 0.4 emu/Oe, respectively.

• 한국표면공학회지
• /
• 제55권1호
• /
• pp.1-8
• /
• 2022

Titanium dioxide (TiO₂) is one of the most intensively investigated materials in materials science. Mostly, TiO₂ has been used in the form of nanoparticles, but recently new highly ordered TiO₂ nanotubes (U-tube) has been introduced and applied to various applications due to their one-dimensional charge path way. In the present paper, we described the formation process and physical properties of U-tube then, gave examples of applications in sequence. Firstly, in photocatalysis, U-tube was used with Au/Pt co-catalysts and showed enhanced photogenerated H₂ efficiency compared to bare TiO₂. Secondly, photoelectrochemical performance of U-tube was evaluated with different heat-treatment temperatures. As a further application, two different types of electrical cell (Ti-TiO₂-Pt and Ti-TiO₂-Pt_NP) was configurated to observe memristive behavior of U-tube. Both cells behaved as switching electrodes and follow a memristive movement in the high and low resistance state extremely well with high reproducibility.

• 반도체디스플레이기술학회지
• /
• 제22권1호
• /
• pp.64-71
• /
• 2023

In this study, we investigated the effects of BiAlSiO glass composition on its glass forming range, thermal properties, and plasma resistance. The results showed that increasing the Al2O3 content suppressed the tendency for crystallization and hindered glass formation beyond a certain threshold. Bi2O3 was found to increase the content of non-bridging oxygen, resulting in a decrease in glass transition temperature and an increase in thermal expansion coefficient. Furthermore, the etching rate was found to improve with increasing Al2O3 content but decrease with increasing SiO2 content. It was concluded that the boiling point of fluorinated compounds should be considered to 900℃. Therefore, this study is expected to contribute to the understanding of the properties of BiAlSiO glass and its application to low temperature melting PRG compositions.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3202-3205
• /
• 2023

The k₀-standardization neutron activation analysis method has successfully determined the mass fraction of elements of interest using around a hundred analytical radionuclides. However, several very short-lived nuclides with half-life less than 100 s have not been used at Dalat research reactor. One of the reasons is that the values of k₀-factors of these nuclides are significantly different. Therefore, this work focused on re-determination and evaluation of k₀-factors of very short-lived nuclides ¹¹⁰Ag (T_1/2 = 24 s) and ^46mSc (T_1/2 = 18.75 s). The results of determination of the short-lived nuclides revealed that k₀-factor of ¹¹⁰Ag is significantly difference between the existing data and the obtained results in this work. The evaluation of the k₀-factors was done by using the obtained results for application of k₀-NAA for NIST-1566b and NIST-2711A standard reference materials.

• 대한수학회보
• /
• 제50권3호
• /
• pp.915-928
• /
• 2013

In this paper, we will provide an alternative proof to characterize the pointwise multipliers which maps a Sobolev space $\dot{H}^r(\mathb{R}^d)$ to its dual $\dot{H}^{-r}(\mathb{R}^d)$ in the case 0 < $r$ < $\frac{d}{2}$ by a simple application of the definition of fractional Sobolev space. The proof relies on a method introduced by Maz'ya-Verbitsky [9] to prove the same result.

• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.243-245
• /
• 2013

Topological insulator (TI) has non-trivial metallic surface states and has provoked many studies of property of this metarial. One of TI, $Bi_2Se_3$ is the promising metarial due to application of quantum devices. We investigate the effect of Ag adatom in the $Bi_2Se_3$ (111) surface. The silver atom prefers to locate within the vdW gap between the QLs rather than on the top surface. The effect of Ag adsorption is the rise of the Fermi level implying that the adsorbed Ag atoms behave like electron donors.

• 대한수학회보
• /
• 제59권3호
• /
• pp.745-756
• /
• 2022

We study a nonlinear wave equation on finite connected weighted graphs. Using Rothe's and energy methods, we prove the existence and uniqueness of solution under certain assumption. For linear wave equation on graphs, Lin and Xie [10] obtained the existence and uniqueness of solution. The main novelty of this paper is that the wave equation we considered has the nonlinear damping term |u_t|^p-1·u_t (p > 1).

• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.498-498
• /
• 2020

• Korean Journal of Mathematics
• /
• 제32권1호
• /
• pp.183-193
• /
• 2024

In this paper, a new class of bi-univalent functions that are described by Gegenbauer polynomials is presented. We obtain the estimates of the Taylor-Maclaurin coefficients |m₂| and |m₃| for each function in this class of bi-univalent functions. In addition, the Fekete-Szegö problems function new are also studied.

• 유기물자원화
• /
• 제32권1호
• /
• pp.39-47
• /
• 2024

본 연구에서는 반도체 제조공정에서 발생한 실리콘 슬러지(SS)를 재활용하여 라이다 센서에 인식 가능한 검은색 소재(SS/bTiO₂)로 제조하고, 두 종류의 라이다 센서(MEMS 및 Rotating LiDAR)를 활용하여 제조한 소재의 인식률을 확인하였다. 상세히는, SS 표면의 금속 불순물을 제거하여 이산화티타늄을 도입하고 화학적 환원을 통해 SS/bTiO₂ 소재를 제조하였다. SS/bTiO₂는 투명 페인트와 혼합하여 친수성 검은색 도료로 제조하고 스프레이 건을 사용하여 유리 기판에 도포하였다. SS/bTiO₂ 기반의 도료는 상용화된 카본 블랙 기반의 도료와 유사한 명도(L^*=15.7)를 가짐과 동시에 우수한 근적외선 반사율(26.5R%, 905nm)을 나타내었다. 더불어, MEMS 및 Rotating 라이다를 통해서도 성공적으로 인식이 되는 것을 확인하였다. 이는 프레넬 반사 원리에 의해 검은색 이산화티타늄과 실리콘 슬러지 간의 계면에서 높은 반사가 일어났기 때문이다. 본 연구를 통해, 반도체 제조공정에서 발생하는 실리콘 슬러지를 효과적으로 재활용할 수 있는 새로운 응용 방안에 대하여 제시하였다.