• Title/Summary/Keyword: su

Search Result 65,274, Processing Time 0.069 seconds

Late Quaternary Seismic Stratigraphy and Sedimentation of the Southeastern Continental Shelf, Korea Strait (한국 남동해역(대한해협) 대륙붕지역의 후 제4기 탄성파 층서 및 퇴적작용)

  • Yoo Dong-Geun;Lee Chi-Won;Min Gun-Hong;Lee Ho-Young;Choi Joung-Gyu;Park Soo-Chul
    • Geophysics and Geophysical Exploration
    • /
    • v.8 no.3
    • /
    • pp.201-206
    • /
    • 2005
  • Interpretation of high-resolution seismic profiles from the southeastern continental shelf of Korea reveals that the sedimentary deposits consist of seven seismic units formed during the late Quaternary. These units comprise lowstand, transgressive, and highstand systems tracts. The lowstand systems tract consists of a lowstand prograding wedge (SU1) and a mass flow deposit (SU2) including slumps and slides. The transgressive systems tract contains four seismic units: an ancient beach/shoreface deposit (SU3), a channel-fill deposit (SU4), a transgressive sand layer (SU5), and a transgressive sand ridge (SU6). The highstand systems tract consists of an inner-shelf mud deposit (SU7) derived from the Nakdong and Seomjin rivers during the last 6 ka when sea level was close to the present level.

SU-8 Mold Fabrication with Low Internal Stress and High Aspect Ratio for UV LIGA Process (고 형상비 UV LIGA 공정을 위한 낮은 내부응력의 SU-8 도금틀 제작)

  • Jang, Hyeon-Gi;Kim, Yong-Gwon
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.48 no.8
    • /
    • pp.598-604
    • /
    • 1999
  • This paper describes the research to minimize the film stress and maximize the aspect ratio of photoresist structure, especially about SU-8 for electroplating mold. UV LIGA process using SU-8 allows fabricating high aspect ratio polymer structures. However, it is hard to get fine patterns in the high aspect ratio structures because of high internal stress and difficulty of removing SU-8. The purpose of this paper is to setup the process condition for the obtainment of both low film stress and high aspect ratio and to find design rules that make the pattern be less dependent on stress problem. Firstly, the process of heat treatment and exposure of SU-8 are proposed. These two conditions control the amount of cross-linkage in polymer structure, which is the most important parameter of both pattern generation and remaining stress. Heat treatment is dealed with soft bake and post-exposure-bake. Temperature and time duration of each step are varied with heat treatment condition. Some test patterns are fabricated to evaluate the proposed process. Nickel electroplating is performed with the mold fabricated through the proposed process to confirm the SU-8 as a good electroplating mold.

  • PDF

A development of fabrication processes of microstructure using SU-8 PR (SU-8 PR을 이용한 마이크로 구조물 제작 공정 개발)

  • 김창교;장석원;노일호
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.13 no.2
    • /
    • pp.68-72
    • /
    • 2003
  • In this paper, we developed a new thick photoresist fabrication technology for 3-dimensional microstructures. In general, like as AZ photoresist was coated with thin film thickness about 1 $\mu\textrm{m}$ to 30 $\mu\textrm{m}$, but photoresist like SU-8 has thickness of several tens $\mu\textrm{m}$ or more and high aspect ratio. When we fabricate a microstructure using the thick photoresist like SU-8, cracks on the SU-8 thick photoresist are appeared by stress which was caused by sudden cooling down during bake of the thick photoresist spun on wafer. Thus, it was hard to fabricate the microstructure using the thick photoresist for electroplating. In this paper, we developed a new process to produce a 3-dimensional microstructure without the crack by stress through a suitable thick photoresist coating, time control of cool down and time control of PEB (Post Expose Bake).

Simulation of Run-out caused by Imperfection of Ball Bearing for High-speed Spindle Units

  • Zverev Igor Aexeevich;Eun In-Ung;Chung Won-Jee;Lee Choon-Man
    • International Journal of Precision Engineering and Manufacturing
    • /
    • v.7 no.3
    • /
    • pp.3-7
    • /
    • 2006
  • For the purpose to improve and to automate designing of high-speed spindle units (SU's), we have developed the mathematical models and software to estimate SU performance characteristics, including the run-out of spindles running on ball bearings. In order to understand better the mechanics of high-speed SUs, the dynamic interaction of ball bearings and SU, and the influence of the bearing imperfections and SU's operational conditions on the run-out, we have carried out computer simulation and experimental studies. Through the study of SU's, we have found out that run-out of SU can vary drastically with variation of rpm. The influences of rotation speed and of accuracy parameters of bearings on the SU accuracy have the greatest importance. The influence of bearing preload has a secondary importance. Comparison of the results of these studies has demonstrated adequacy of the models and software developed to the real SU's.

Isolation and Identification of Wild Yeasts from Soils of an Herb Park in Seoul Metropolitan City and Characteristics of Unrecorded Yeasts (서울특별시 허브공원 토양으로부터 야생 효모의 분리, 동정 및 미기록 효모의 특성)

  • Han, Sang-Min;Lee, Jong-Soo
    • The Korean Journal of Mycology
    • /
    • v.44 no.2
    • /
    • pp.108-112
    • /
    • 2016
  • This study focused on the isolation of wild yeasts from the soils of an herb park in Seoul, Korea, and characterization of unrecorded yeasts. Fifteen yeast strains of nine species were isolated and identified. Among them, strains of the Cryptococcus genus, such as Cryptococcus laurentii (2 strains), Cryptococcus saitoi (two strains), Cryptococcus podzolicus (2 strains), and Cryptococcus sp. (2 strains) were dominant. Candida boleticola SU14-2, Candida novakii SU6-2 and Cryptococcus podzolicus SU18-3 were also screened as newly recorded yeasts in Korea. Candida novakii SU6-2 formed ascospores and a pseudomycelium, and Candida boleticola SU14-2 grew well in the 5% NaCl-containing yeast extract-peptone-dextrose medium.

"Su$\acute{s}$ruta-samhit$\bar{a}$.S$\bar{u}$trasth$\bar{a}$na"의 제1장~제15장까지 어석(語釋)을 통한 '$\bar{A}$yurveda(아유르베다)'에 관한 연구(I)

  • Seo, Ji-Yeong;Kim, Gi-Uk;Park, Hyeon-Guk
    • Journal of Korean Medical classics
    • /
    • v.22 no.4
    • /
    • pp.67-100
    • /
    • 2009
  • "Su$\acute{s}$ruta-samhit$\bar{a}$(妙闻集)是印度传统医学最重要的经典著作之一, 与"Caraka-samhit$\bar{a}$(闺罗迦集)"以及成书于八世纪的"Astangahrdaya-samhita(八心集)"(内外科综合概要)并称'$\bar{A}$yurveda(阿输吠陀)'的"三位长老", 至今仍是当代印度'$\bar{A}$yurveda(阿输吠陀)' 正规教育所采用的主要教科书. Su$\acute{s}$ruta-samhit$\bar{a}$(妙闻集)"是卷一"总說"46章, 卷二"病因论"16章, 卷三"身体论"10章, 卷四"治疗论"40章, 卷五"毒物论"8章, 卷六"补遗"66章等总共186章构成的. 其作者为苏斯鲁塔($Su\'{s}ruta$), 故此书亦称" Su$\acute{s}$ruta-samhit$\bar{a}$(苏斯鲁塔本集)". "Su$\acute{s}$ruta-samhit$\bar{a}$" 的成书年代无法确定, 虽然不乏认为其成书年代可以上溯到纪元前若干世纪者, 但现今一般倾向于认为其传世本的形成是在公元3~4世纪. 如果与韩医学加以比较, 可以说在经典的形成与流传方面, '$\bar{A}$yurveda(阿输吠陀)'的"三位长老"与今本"黄帝内经", 无论是在历史地位, 流传与分合, 内容形式及重要性等许多方面, 均有极大的可比性. 然而不论是想真正了解'$\bar{A}$yurveda(阿输吠陀)', 还是想对不同医学体系做比较, 交流方面的研究, 或是全面考察医学与社会, 哲学等等的关系, 仅仅阅读综述性的研究文章与著作总是不够的. 细观而真正了解经典原貌时所能体会到的真实感. 因此, 试图了翻译"Su$\acute{s}$ruta-samhit$\bar{a}$". "Su$\acute{s}$ruta-samhit$\bar{a}$"是用梵语写的, 所以很难接近. 以下借助大地原诚玄的1943年日译本"スシュルタ本集"之第一卷"总說" 而廖育群的"阿輪吠陀-印度的传统医学""妙闻集 总论篇"的主要内容译出. 如今西医体系获得了普遍性, 其他文化圈的传统医学消灭了. 然而其中韩医学和印度传统医学'$\bar{A}$yurveda(阿输吠陀)'仍然保持了生命力. 从而,论者通过翻译'$\bar{A}$yurveda(阿输吠陀)'医学经典即"Su$\acute{s}$ruta-samhit$\bar{a}$(妙闻集)"的"总說", 而且要贡献扩大韩医学和东洋传统医学的范围.

  • PDF

Numerical Simulation of Convection-dominated Flow Using SU/PG Scheme (SU/PG 기법을 이용한 이송이 지배적인 흐름 수치모의)

  • Song, Chang Geun;Seo, Il Won
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.32 no.3B
    • /
    • pp.175-183
    • /
    • 2012
  • In this study, Galerkin scheme and SU/PG scheme of Petrov-Galerkin family were applied to the shallow water equations and a finite element model for shallow water flow was developed. Numerical simulations were conducted in several flumes with convection-dominated flow condition. Flow simulation of channel with slender structure in the water course revealed that Galerkin and SU/PG schemes showed similar results under very low Fr number and Re number condition. However, when the Fr number increased up to 1.58, Galerkin scheme did not converge while SU/PG scheme produced stable solutions after 5 iterations by Newton-Raphson method. For the transcritical flow simulation in diverging channel, the present model predicted the hydraulic jump accurately in terms of the jump location, the depth slope, and the flow depth after jump, and the numerical results showed good agreements with the hydraulic experiments carried out by Khalifa(1980). In the oblique hydraulic jump simulation, in which convection-dominated supercritical flow (Fr=2.74) evolves, Galerkin scheme blew up just after the first iteration of the initial time step. However, SU/PG scheme captured the boundary of oblique hydraulic jump accurately without numerical oscillation. The maximum errors quantified with exact solutions were less than 0.2% in water depth and velocity calculations, and thereby SU/PG scheme predicted the oblique hydraulic jump phenomena more accurately compared with the previous studies (Levin et al., 2006; Ricchiuto et al., 2007).

A study of constructing information of main treating acupoint with priority given to five vicera's Back-su point (배수혈을 중심으로 한 주요 치료혈 정보 구축)

  • Kim, Jong-Yeol;Kwon, O-Sang;Lee, Yu-Jung;Kim, Jae-Hyo;Kim, Eung-Sun;Kim, Yu-Lee;Shon, In-Chul
    • Korean Journal of Acupuncture
    • /
    • v.24 no.4
    • /
    • pp.47-54
    • /
    • 2007
  • Objection : A medicine which is patient-initiative and preventive is required in Korea, which is going to an aging society. On this, we started this study to make a new rule to diagnose and treat more definitely by linking traditional Oriental medicine to Sasang Constitional medicine, which thought to be suitable because of Sasang Constitional medicine has been valued on staying, diet and human's nature which means preventive medical propensity. Methods : On this study, we discriminated Sasang Constition of 161 students, who is in college of oriental medicine, Wonkwang university, by using QSCCII program; and in those students, we checked 30 volunteers's five vicera's Back-su point on riging and depression, tenderness reaction, and color reaction after cupping treatment. Results : As a result of study of riging and depression of five vicera's Back-su point, we could confirm that defecient organ's Back-su point were more depressed than excess organ in Seum-in, Taeeum-in, Soyang-in. As a result of study of tenderness reaction of five vicera's Back-su point, we could confirm that excess organ's Back-su point showed stronger tenderness reaction than defecient organ in Seum-in, Taeeum-in; and excess organ's Back-su point showed weaker tenderness reaction than defecient organ in Soyang-in. As a result of study of color reaction after cupping treatment of five vicera's Back-su point, we could confirm that excess organ's Back-su point showed stronger color reaction than defecient organ in Seum-in, Taeeum-in; and excess organ's Back-su point showed weaker color reaction than defecient organ in Soyang-in. Those data suggest that there are close correlation between Sasang Constition and on riging and depression, tenderness reaction, and color reaction after cupping treatment of five vicera's Back-su point in treditional Oriental medicine. Conclusions : From this study, we can make a new rule to differentiate Sasang Constition by clearfy a relation between Sasang Constition and five vicera's Back-su point; and with this rule, we could contribute to popularization and objectification of Sasang Constition medicine and further more, Oriental medicine by making a Sasang Constition diagnosis instrument. With this, a trait of Sasang Constition medicine that is preventive and valued on character of individuals will contribute to building a patient-initiative and preventive medical system and will expend the domain of Oriental medicine.

  • PDF

A Study on the Name of Ho-su(好袖) of Chosun Period (朝鮮時代의 胡袖)

  • 김진구
    • The Research Journal of the Costume Culture
    • /
    • v.7 no.3
    • /
    • pp.22-34
    • /
    • 1999
  • The purpose of this study was to trace and identify the origin and the meanings of the word ho-su(胡袖) of Chosun dynasty period. Findings of this study can be summerized as follows : The original meaning of the word ho-su(胡袖) is a name of round sleeves. Later it was used as a name of a dress with round sleeves. The word ho-su as a name of a dress is an abbrecviated form of ho su so o za(好袖小 子) of a previous period. The word jyo go ri(赤古里) in historical documents is anothor name of so o za(小 子). Wearing the ho-su(胡袖) was restricted to royal family women. It was included in royal women\`s wedding garments as ordinary use. Colors of this dress was used as a means of differentiating the rank and position of the wearer.

  • PDF