• E2M - 전기 전자와 첨단 소재
• /
• 제7권1호
• /
• pp.49-56
• /
• 1994

Polycrystalline CdS thin films were deposited by using EBE method and its crystal structure, surface morphology, electrical and optical properties as a function of annealing temperature were investigated. It was found that optimum growth conditions were substrate temperature annealing temperature 300[.deg. C]. The films were hexagonal structure preferred(002) plane and maximum grain size was 421[.angs.]. As the results, resistivity and optical transmittance of CdS thin films were $8.3{\times}{10^3}$[.ohm.cm] and 89[%] respectively.

• 한국공간구조학회논문집
• /
• 제15권2호
• /
• pp.113-120
• /
• 2015

This study investigate the dynamic response changes of rib dome structure according to property changes of Substructure. Eigenvalue analysis is conducted in first natural frequency of rib dome versus substructure and searched in the dominant mode of horizontal and vertical direction. Resonance frequency by each first natural frequency of the rib dome structure, substructure and total structure is applied for a seismic wave. That is analyzed about maximum displacement response ratio and maximum acceleration response ratio.

• Journal of Radiation Protection and Research
• /
• 제34권2호
• /
• pp.65-68
• /
• 2009

Metal-semiconductor contact is very important for the operating property of semiconductor detector. $Cd_{0.96}$ $Zn_{0.04}$ Te semiconductor crystal was grown with Bridgman method, and the crystal was cut and polished. EPMA (Electron Probe Micro Analyzer) and ICP-MS (Inductively Coupled Plasma Mass Spectrometry) analysis were done to obtain the chemical composition and impurity of the crystal. Metal contact was deposited with thermal evaporator on both sides of the crystal. Detectors with Au/CZT/Au and In/CZT/Au structure were made, and I-V curve and the energy spectrum were measured with the detectors. It could be seen that the detector with the In/CZT/Au structure has superior property than the detector with Au/CZT/Au structure when the crystal resistivity was low. However, the metal contact structure effect becomes low when the crystal resistivity was high.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권3호
• /
• pp.220-224
• /
• 1994

In this study, we discussed the optical property to find the optimal condition of Te-based antireflection trilayer(ART) structure for a high density optical recording. It was found that the optical property was improved by suggesting the environmental parameters satisfied the optimum condition. As the results, the optimized(.lambda.=8.000${\AA}$.) thickness of the recording layer is 27${\AA}$, and the 1st and 2nd minimum ART conditions of dielectric layers are 1080${\AA}$, 3820${\AA}$, respectively. And the high SNR, the contrast ratio and the sensitivity are achieved by using the ART conditions.

• 한국어학
• /
• 제48권
• /
• pp.193-221
• /
• 2010

The goal of this paper is to reanalyze the structure of 'eumcikha(음직하)' in Korean. We have several important previous works for it. This paper argued against previous works and pointed outd their problems. At first, this paper regarded the construction of 'eumcikha' as one of the modality dependent noun constructions. In this paper I proposed some possibilities of new structure of 'eumcikha'. 1) The structure of 'eumcikha' is not regarded as the 'embedded sentence+upper sentence' construction. 2) It is not also considered as the 'main verb+auxiliary verb' construction. 3) It is not recognized as a morphological one unit, although they have lots of in common. In this paper, I proposed that the construction of 'eumcikha' has both syntactic property and morphological property. Owing to these properties, it is so difficult to determine the structure of it.

• Communications for Statistical Applications and Methods
• /
• 제28권3호
• /
• pp.281-294
• /
• 2021

In this paper, we propose an adaptive regression method based on the single-layer neural network structure. We adopt a symmetric activation function as units of the structure. The activation function has a flexibility of its form with a parametrization and has a localizing property that is useful to improve the quality of estimation. In order to provide a spatially adaptive estimator, we regularize coefficients of the activation functions via ℓ₁-penalization, through which the activation functions to be regarded as unnecessary are removed. In implementation, an efficient coordinate descent algorithm is applied for the proposed estimator. To obtain the stable results of estimation, we present an initialization scheme suited for our structure. Model selection procedure based on the Akaike information criterion is described. The simulation results show that the proposed estimator performs favorably in relation to existing methods and recovers the local structure of the underlying function based on the sample.

• Structural Engineering and Mechanics
• /
• 제87권4호
• /
• pp.363-373
• /
• 2023

Since the first family of structure-dependent methods can simultaneously integrate unconditional stability and explicit formulation in addition to second order accuracy, it is very computationally efficient for solving inertial problems except for adopting auto time-stepping techniques due to no nonlinear iterations. However, an unusual stability property is first found herein since its unconditional stability interval is drastically different for zero and nonzero damping. In fact, instability might occur for solving a damped stiffness hardening system while an accurate result can be obtained for the corresponding undamped stiffness hardening system. A technique of using a stability factor is applied to overcome this difficulty. It can be applied to magnify an unconditional stability interval. After introducing this stability factor, the formulation of this family of structure-dependent methods is changed accordingly and thus its numerical properties must be re-evaluated. In summary, a large stability factor can result in a large unconditional stability interval but also lead to a large relative period error. As a consequence, a stability factor must be appropriately chosen to have a desired unconditional stability interval in addition to an acceptable period distortion.

• 한국의류산업학회지
• /
• 제17권3호
• /
• pp.462-475
• /
• 2015

This paper investigated the characteristics of the physical properties of woven fabrics according to the yarn structure and fibre property. It was found that wicking property of woven fabrics made of sheath/core hybrid yarn were better than those of siro spun and siro-fil hybrid yarns, which was caused by platform for transport of moisture vapor by filaments on the core part of sheath core hybrid yarns. In drying property, the fabric specimen woven by PP/Tencel sheath core hybrid yarns as a warp and Coolmax/Tencel spun yarn as a weft showed quick drying property, which was caused by the sheath core hybrid yarn structure as drainage of water moisture and coolmax fibre characteristics as quick dry material. Concerning to breathability and thermal conductivity as heat transport phenomena, it was observed that breathability of fabrics woven with hybrid yarns such as sheath core and siro-fil in the warp and hi-multi filaments in the weft showed the lowest water vapor resistance, which was explained as due to for air gap in the fibres of the spun yarns to restrict the wet heat transport from perspiration vapor. Thermal conductivities of the fabrics woven with PET/Tencel siro-fil yarns in the weft and hybrid yarns such as sheath core and siro-fil in the warp revealed the highest values, which was observed as due to higher thermal conductivity of PET than PP and more contact point between fibres in the siro-fil and sheath core hybrid yarns.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2839-2842
• /
• 2014

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.158-159
• /
• 2015

Architectural fabrics are now used in membrane structure with the merits of free shape, lightness and opened up new possibility for the design of new building structures. Recently PVC, PVF, PVDF, PTFE coated fabric for using the membrane structures. However, clear standards for the design and construction is not exist because of the lack of Architectural fabric research. In this paper, Flammable properties of PVDF, PTFE coated fabrics are obtained through the Flammability test using the Cone Calorimeter. Based on these results, identify the fire resistance property of the Architectural fabric.