• 한국구조물진단유지관리공학회 논문집
• /
• 제23권5호
• /
• pp.30-36
• /
• 2019

염해에 노출된 콘크리트 구조물의 내구수명을 정량적으로 평가하기 위해서는 사용 배합을 통하여 확산계수를 평가하고 이를 이용한 염화물 침투 해석이 필요하다. 본 연구에서는 비말대에 노출된 콘크리트 구조물에 대하여 촉진 확산계수를 NT BUILD 492 및 ASTM 1202를 통하여 평가하였으며, 기존의 연구를 이용하여 겉보기 확산계수를 도출하였다. 사용배합의 특성과 가장 보수적인 조건인 임계 염화물량과 표면 염화물량을 고려하였으며, Life 365 ver.2 프로그램을 이용하여 외벽 및 기둥구조의 내구수명을 평가하였다. 10년 및 15년의 Built-up period의 변화에 대해서는 내구수명은 큰 차이를 보이지 않았으며. 슬래그를 사용한 두 개의 배합에서는 높은 시간의존성 지수와 낮은 초기 염화물 확산계수로 인해 75년 이상의 높은 내구수명이 확보되었다.

• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.619-628
• /
• 2009

콘크리트구조물의 시간의존거동을 예측하기 위해서 콘크리트의 크리프와 건조수축 등 시간의존특성을 묘사하는 모델을 이용한다. 그러나 크리프와 건조수축 모델 자체의 불확실성과 환경조건의 불확실성 때문에 이러한 모델을 이용하여 얻은 처짐과 실제로 측정된 처짐 사이에는 상당한 차이가 있다. 이러한 오차와 불확실성을 줄이기 위하여 실제 구조물에 이용된 콘크리트를 이용한 크리프 시험에 의한 결과를 이용하여 모델의 불확실성을 줄이는 노력을 하기도 한다. 하지만 이 방법도 실제 구조물이 놓인 환경조건을 정확히 모사할 수 없다는 점과 재료 자체의 불확실성 때문에 실험에서 얻은 크리프와 건조수축의 예측 값이 실제 구조물에서 발생하는 값과 다를 수 있다. 이 연구에서는 콘크리트의 시간의존거동에 영향을 미치는 요소 중 크리프에 대하여 살펴보고, 크리프 모델 불확실성 인자를 오차요인으로 고려하여 콘크리트 부재에서 측정된 처짐으로부터 크리프 계수를 추정하는 방법을 제시하였다. 이중 강합성 거더와 콘크리트 보 부재의 해석 예제를 통하여 이 연구에서 제시하는 방법의 타당성을 검증하였다. 이 연구에서 제시된 크리프를 오차요인으로 보고 크리프 계수를 추정하는 방법은 특히, 장지간 PSC 교량이나 콘크리트 사장교처럼 처짐이 중요한 형상관리인자인 경우에 구조물의 장기거동에 대한 합리적 예측에 도움을 줄 것으로 사료된다.

• Fibers and Polymers
• /
• 제2권3호
• /
• pp.159-163
• /
• 2001

Five yellow disperse dyes were synthesized and their dyeing, fastness and photodegradation behaviors were investigated. It was found that dyes derived from phenylindole and N-alkylaminobenzene showed dye uptake directly proportional to the dye concentration, but the build-up of dyes derived from carbazole and pyridone were not good. The wavelength at maximum absorption. molar extinction coefficient. and the tendency to the photodegradation were strongly dependent on the electron donating ability of the coupling component. The dye, whose coupling component was phenylindole, possessed the excellent dyeing properties and the high degree of lightfastness. UVA had an effect on the inhibition of the photodegradation especially for the easily photodegradabte dyes.

• Structural Engineering and Mechanics
• /
• 제2권1호
• /
• pp.95-112
• /
• 1994

This paper describes the formulation and application of a dynamic model for a conventional rail track subjected to arbitary loading functions that simulate wheel/rail impact forces. The rail track is idealized as a periodic elastically coupled beam system resting on a Winkler foundation. Modal parameters of the track structure are first obtained from the natural vibration characteristics of the beam system, which is discretized into a periodic assembly of a specially-constructed track element and a single beam element characterized by their exact dynamic stiffness matrices. An equivalent frequency-dependent spring coefficient representing the resilient, flexural and inertial characteristics of the rail support components is introduced to reduce the degrees of freedom of the track element. The forced vibration equations of motion of the track subjected to a series of loading functions are then formulated by using beam bending theories and are reduced to second order ordinary differential equations through the use of mode summation with non-proportional modal damping. Numerical examples for the dynamic responses of a typical track are presented, and the solutions resulting from different rail/tie beam theories are compared.

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.251-255
• /
• 2008

Microwave dielectric properties of $MgTiO_3,\;MgWO_4,\;MgNb_2O_6$, and $MgTa_2O_6$ were investigated based on the structural characteristics. The dielectric constant (K) was dependent on the dielectric polarizabilities of the specimens, and the deviation of the observed dielectric polarizabilities (${\alpha}_{obs.}$) from the theoretical dielectric polarizabilities (${\alpha}_{theo.}$) were decreased with increasing of Mg-site bond valence. Quality factors (Qf) were affected by the sharing type of $MgO_6$ and $BO_6$ octahedra. Temperature coefficient of resonant frequency (TCF) was decreased with increasing of average octahedral distortion.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.52-60
• /
• 2002

The purpose of this research is to study the vibration and acoustic pressure radiation from a thin isotropic flat plate stiffened by a rectangular array of beams, and excited by a time harmonic point force. These constructions on aircraft and ship structures are often subjected to fiequency dependent pressure fluctuations and forces. Forces from the these excitations induce structural vibrations in a wide range of fiequencies, which may cause such things as acoustic fatigue and internal cabin noise in the aircraft. It is thus important that the response characteristics and vibration modes of such periodic structures be horn. From this theoretical model, the sound pressure levels(SPL) in a semi-infinite fluid(water) bounded by the plate with the variation in the locations of an external time harmonic point farce on the plate can be calculated efficiently using three numerical tools such as the Gauss-jordan method the LU decomposition method md the IMSL numerical package.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1407-1412
• /
• 2003

In MEMS devices, packaging induced stress or stress induced structure deformation become increasing concerns since it directly affects the performance of the device. In this paper, deformation behavior of MEMS gyroscope package subjected to temparature change is investigated using high-sensitivity $Moir{\acute{e}}$ interferometry. Using the real-time $Moir{\acute{e}}$ setup, fringe patterns are recorded and analyzed at several temperatures. Temperature dependent analyses of warpages and extensions/contractions of the package are presented. Linear elastic behavior is documented in the temperature region of room temperature to $125^{\circ}C$. Analysis of the package reveals that global bending occurs due to the mismatch of thermal expansion coefficient between the chip, the molding compond and the PCB.

• 설비공학논문집
• /
• 제11권3호
• /
• pp.313-320
• /
• 1999

A PFC(Perfluorocarbon) heat pipe has been used recently for cooling of GTO(gate turn off) thyristors or diodes in electric commuter trains. The present study was conducted to determine heat transport limitation of a PFC heat pipe which is one of the important parameters in heat pipes design. The variables such as tube diameter, fill charge ratio, internal surface structure and operating temperature were examined by way of experiment. Experimental data showed that the heat transport limitation of PFC heat pipe was considerably low and mostly dependent on tube diameter, with the value of 440~500W for d$o$/=22.23mm and 150~200W for d$o$=15.88mm. The other parameters had negligible effects, except for the case of small charge ratio less than 30%. Some correlations proposed by previous studies were in agreement with data from this study within 10~30%.

• Smart Structures and Systems
• /
• 제23권5호
• /
• pp.429-447
• /
• 2019

The present study analyzed free vibration of the three-layered micro annular/circular plate which its core and face sheets are made of saturated porous materials and FG-CNTRCs, respectively. The structure is subjected to magneto-electric fields and magneto-electro-mechanical pre loads. Mechanical properties of the porous core and also FG-CNTRC face sheets are varied through the thickness direction. Using dynamic Hamilton's principle, the motion equations based on MCS and FSD theories are derived and solved via GDQ as an efficient numerical method. Effect of different parameters such as pores distributions, porosity coefficient, pores compressibility, CNTs distribution, elastic foundation, multi-physical pre loads, small scale parameter and aspect ratio of the plate are investigated. The findings of this study can be useful for designing smart structures such as sensor and actuator.

• Preventive Nutrition and Food Science
• /
• 제16권3호
• /
• pp.267-271
• /
• 2011

Static Headspace Gas Chromatographic analysis was used to study the partitioning behavior of five organic printing ink solvents between chocolate cookie/air systems. Three cookie sample formulations varied with respect to chocolate type and overall percentage of constituents. Major considerations involved differences in fat content and type and resulting variability in chemical and physical structure. Each of the solvents studied (ethyl acetate, hexane, isopropanol, methyl ethyl ketone, toluene) represents a general class of printing ink solvents based on predominate functional group. Values of the partitioning coefficient (Kp) were determined at equilibrium using measured quantities of both solvent and cookie sample in closed systems at temperature of 25, 35, and $45^{\circ}C$. In each of the three cookies at the three test temperatures, toluene always exhibited the greatest value of partitioning to cookie and hexane always exhibited the least. Results also showed that the partitioning behavior of solvents is generally inversely related to temperature and that solvent affinity, though constant for a particular cookie type over all test temperatures, varies significantly among the three cookie types. The preference of each of the five solvents for each cookie sample was also found to vary with temperature. No correlation was found between the extent of partitioning and cookie formulation or physical characteristic of solvent. The Hildebrand parameter, related to ${\Delta}Hmix$ (heat of mixing), may be used to describe differences in partitioning based on the overall potential of a solvent/cookie interaction to occur. The potential for interaction is dependent upon the chemical structure of the cookie sample and thus the availability of 'active-sites' required for a given solvent.