• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.136-142
• /
• 2009

The vehicle's light-weight technology is divided into optimization of structure geometric and material. Structure geometric optimization and improvement of materials has examined to be power-train and maintenance on the severe condition. The core technology of Special vehicle's light-weight is constitute by Drop box, Axle and Final reduction gear. Technology and product of the parts is high to overseas and import dependency. We will want to examine the possibility of light-weight for the Axle Case and Drop box-connections. In this research, conventional design of excess weight will inhibit the mobility and fuel efficiency. Through the improvement of Axle material, we saw the possibility reducing weight. If you use the results of these studies, it will be available to domestic production technology and reducing weight of RV car, Dump truck, Track crain, etc.

• 한국항만학회지
• /
• 제13권2호
• /
• pp.365-380
• /
• 1999

In this thesis the legal systems related to real estate and sea area utilization are studied in order to improve them for construction of Very Large Floating Structure. Main research subjects are as follows: 1) Whether can Very Large Floating Structure be accepted or not as real estate like house and land\ulcorner 2) How can the sea area which is occupied by Very Large Floating Structure be utilized\ulcorner As the conclusion, the Very Large Floating Structure can be registered as real estate even though it is not specified by Korean law for the present. The design concept of Very Large Floating Structure can be interpreted as satisfying enough necessary conditions and factors for Very Large Floating Structure to become real estate. In the near future, we have to make improvement on the laws related with the construction of Very Large Floating Structures so that private sectors can joint the construction. In additions, a new law for various floating structures should be made as soon as possible.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.159-165
• /
• 1995

A gate-recessed structure is introduced to SOI MOSFET's in order to increase the source-to-drain breakdown voltage. A significant increase in the breakdown voltage is observed compared with that of a planar single source/drain SOI MOSFET without inducing the appreciable reduction of the current drivability. We have analyzed the origin of the breakdown voltage improvement by the substrate current measurements and 2-D device simulations, and shown that the breakdown voltage improvement is caused by the reductions in the impact ionization rate and the parasitic bipolar current gain.

• Journal of Information Technology Applications and Management
• /
• 제21권1호
• /
• pp.165-176
• /
• 2014

This paper was tried to show the improvement model for software industry structure in Korea regarding to have the global level of competence in Korean software firms. To suggest the improvement model for software industry structure, the detailed status about software industry which as in the supply and demand perspectives and comparativeness dimension were analysed. Also to this model the special survey results from the 35 professionalists in the software industry were included. This improvement model suggests the big software firms have to consider the economy of the scale, and to enter global IT market, the other SMEs have to pursuit themselves as a specified technology firms. So it is good for the oversea project collaboration with the solution provider firms and IT service firms. And it is desirable to make a the economy of scale regarding as the solution venture startup, M&A, networking the software firms as supply chain. Also the development of new business model for new market and firms with the high-tech business competency will be required.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.601-604
• /
• 2002

We propose modified fence electrode structure for manufacturing of ITO-electrode-free PDP. Luminance, luminance efficiency and addressing time for the proposed structure shows performance improvement about 25 percent. Our results can be used for the reduction of manufacturing cost without degradation of PDP performance.

• 한국재난정보학회 논문집
• /
• 제16권1호
• /
• pp.10-20
• /
• 2020

연구목적: 터널구조물 유지관리계측의 현장점검 결과를 분석하여 개선방안을 제시한다. 연구방법: 도심지에서 건설되고 있는 서울지하철◯호선 14개 공구의 터널구조물을 대상으로 유지관리계측에 대한 다양한 항목의 문제점을 조사하고 분석을 실시하였다. 연구결과: 유지관리 계측 항목과 계측수량 및 설치위치는 개착터널과 굴착터널로 구분하여 개선방안을 제시하였다. 계측기기의 내구연한은 각종 기준을 검토하였고, 내구성 확인방법은 계측센서의 승인 및 검수, 검사 및 시험, 검정 및 교정 등의 개선방안을 제시하였다. 결론: 터널구조물 유지관리계측의 개선방안을 건설현장에 적용하면 유지관리계측의 효율성이 증대되고 건설계측 기술발전에 기여할 것이다.

• 유통과학연구
• /
• 제17권4호
• /
• pp.51-57
• /
• 2019

Purpose - This study aims to improve the distribution structure of the OLED market and develop cost-effective optimization techniques. Specifically, it is a study on the optimization of ferric chloride to improve the etch of SUS MASK for OLED. Research design, data, and methodology - Applying the optimal conditions of the experiment, the final confirmation was evaluated for improvement by the Process Capability Index (Cpk). It is possible to derive social performance such as improvement of precision of SUS MASK manufacturing, economic performance such as defect rate, reduction of waste generation and treatment cost, technological achievement such as SUS MASK production technology, improvement of profit structure of technology development and process improvement do. Results - The improvement of the Cpk before the improvement was made was confirmed to be 0.57% with a defect estimate of 25.07% with a failure estimate of 0.57% after the improvement, and 8.84% with a failure estimate of 0.57% level after the improvement. Conclusions - If the conclusions obtained from the specimen experiment are applied to the manufacturing process of SUS MASK, it will be possible to expect excellent cost-effective competitiveness due to the improvement of precision and reduction of defect rate to enhance the OLED market penetration.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제3권8호
• /
• pp.261-270
• /
• 2014

최근 인터넷 트래픽이 증가하면서 웹 서버의 성능 향상에 많은 노력들을 기울여왔다. 고사양 하드웨어로의 교체 또는 서버 수의 증설과 같은 하드웨어 측면 해결방법 외에 소프트웨어 측면의 해결 방법들이 있는데 최근 이에 대한 연구들이 활발히 진행되고 있다. 본 논문에서는 기존 TCP 네트워킹 수신과정에서 발생하는 성능 저하 문제점들을 파악하고 이를 해결할 수 있는 방법을 제안한다. 리눅스 TCP 네트워킹 성능 개선에 관한 기존 방법 세 가지와 본 논문에서 새로 제안하는 두 가지 방법을 통합 적용하여 성능을 향상시킨다. 기존 개선 방법들로는 멀티코어 환경에서 패킷을 흐름단위로 코어에 할당하는 방법, 과도한 인터럽트 요청을 조절하는 ITR(Interrupt Throttle Rate) 방법, sk_buff 자료구조 recycling 방법이다. 본 논문에서 새로 제안하는 방법은 fd 자료구조 recycling 방법과 epoll_event 자료구조 recycling 방법이다. 웹 서버 환경에서 실험을 통해 본 논문의 제안방법들의 성능 개선효과, 또한 기존방법들과의 통합 적용했을 경우 성능 개선효과를 검증한다. 웹 서버로는 간단한 웹 서버, 리눅스에서 일반적으로 사용하는 Lighttpd와 Apache 웹 서버를 사용한다. 간단한 웹 서버 환경에서 본 논문에서 제안한 fd 재사용과 epoll_event 재사용을 적용할 경우 성능이 각각 7%와 6% 개선되고, 이 두 가지 방법을 기존의 세 가지 방법과 통합하여 적용한 경우 성능이 총 40%까지 개선된다. Lighttpd와 Apache 웹 서버 환경에서 다섯 가지 통합 방법을 적용한 경우 성능이 각각 총 36%, 20%까지 개선된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.573-576
• /
• 2003

In this paper the following conclusions were obtained after examining and analyzing data through the various experiments by adopting automobile's piston as the experimental materials among the automobile materials which are being commercialized. The various experiments have been carried out with the object of presenting the selection of rational. economic materials and criterion according to the improvement of machining characteristics by grasping the strength and weakness of existing various materials and using the effects of metallic structure variables as well as satisfying the required conditions.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.43-48
• /
• 2010

본 논문의 목적은 액체 살포시 사용되는 초미립자 살포기에 대하여 SolidWorks를 이용하여 설계하고 3차원 유한요소해석 코드인 ANSYS를 활용하여 해석하였다. 해석결과로서 응력, 변형률과 전체 변형량을 구하였고 이를 활용하여 초미립자 살포기의 구조를 개선하였으며 이러한 방법은 생산성 향상과 설계기간을 단축할 수 있다.