• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.225-231
• /
• 2005

In this paper, to prediction of large deformation behavior of steel structures under loading, 3-Dimensional elastic-plastic FE analysis method is developed by using finite deformation theory and proposed cyclic plasticity model. The accuracy of developed analytical method was verified by comparison of experiment result and analysis results using infinitesimal deformation theory. The good agreement between analysis result by developed analytical method and experiment result is shown. Proposed 3-dimensional FE analysis using finite deformation theory and cyclic plasticity hysteresis model can be predict the large deformation of steel members under cyclic loading.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.186-189
• /
• 2004

Although magnesium has high potential for structural material due to the lightweight and high specific strength, the structural application has been limited by the low ductility at room temperature. The reason of the poor ductility is few activated slip systems of magnesium (HCP structure) during deformation. As temperature increases, however, additional non-basal slip systems are incorporated to exhibit higher ductility comparable to aluminum. In the present study, a series of tensile tests of Mg-Al alloy has been carried out to study deformation behavior with temperature variation. Analysis of load relaxation test results based on internal variable approach gave information about relationship between the micromechanical character and corresponding deformation behavior of magnesium. Especially, the material parameter, p representing dislocation permeability through barriers was altered from 0.1 to 0.15 as the non-basal slip systems were activated at high temperature.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.42-49
• /
• 1999

Because the linear elastic tincture analysis has been proved to be insufficient in predicting the failure of cracked bodies, in recent years, a number of fracture concepts have been studied which remain applicable in the presence of large-scale plasticity near a crack tip. This work thereby presents a new finite element model, as accurate as possible, to analyze plane problems of ductile fracture under large-scale yielding conditions. Based on the incremental theory of plasticity, the p-version finite element analysis is employed to account for the values of J-integral, the most dominant fracture parameter, and the shape of plastic zone near a crack tip by using the J-integral method and equivalent domain integral method. The numerical results by the proposed model are compared with the theoretical solutions in literatures and the numerical solutions by the i,-version of F.E.M.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.95-105
• /
• 1988

This paper describes the development of a reliability-based optimum design technique for such three dimensional tubular frames as off shore structures. The objective function is formulated for the structural weight. Constraints that probability of failure for the critical sections does not exceed the allowable probability of failure are set up. In the evaluation of the probability of failure, fatigue as well as buckling and plasticity failure are taken into account and the mean-value first-order second-moment method(MVFOSM) is applied for its calculation. In order to reduce the computing time required for the repeated structural analysis in the optimization process, reanalysis method is also applied. Application to two and three dimensional simple frame structures is performed. The influence of material properties, external forces, allowable failure probabilities and interaction between external forces on the optimum design is investigated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.126-129
• /
• 2005

Apparent mechanical properties in structural components can be different from the initially designed values due to the formation of the residual stress in metal forming and welding. Therefore, the evaluation of residual stress has great importance in the reliability diagnosis of structural components. A nondestructive continuous indentation technique has been proposed to evaluate various strength concerning mechanical properties from the analysis of load-depth curve. In this study, quantitative residual stress estimation on API X65 welded joints for natural gas pipeline was performed by analyzing the variation of indentation loading curve by residual stress through a new proposed theoretical model. The residual stress from the indentation method was compared with that from the saw-cutting method.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.657-662
• /
• 2007

We studied the piezoresistivity of a steel-alloy 'wire when the deformation exceeds the elastic limit. It is that the piezoresistivity of the steel-alloy wire could be modeled by a bilinear function. To predict the plastic piezoresistivity relation, we developed a simple plastic piezoresistivity model based on the classical hardening plasticity. If structural members such as prestressing tendons in concrete structures are concerned, it is a very efficient and simple tool for monitoring.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.241-250
• /
• 1997

The strain localization of concrete is a phenomenon such that the deformation of concrete is localized in finite region along with softening behavior. The objective of this paper is to develop a plasticity and damage algorithm for the finite element analysis of the strain-localization in concrete. In this paper, concrete member under strain localization is modeled with localized zone and non-localized zone. For modeling of the localized zone in concrete under strain localization, a general Drucker-Prager failure criterion by which the nonlinear strain softening behavior of concrete after peak-stress can be considered is introduced in a thermodynamic formulation of the classical plasticity model. The return-mapping algorithm is used for the integration of the elasto-plastic rate equation and the consistent tangent modulus is also derived. For the modeling of non-localized zone in concrete under strain localization, a consistent nonlinear elastic-damage algorithm is developed by modifying the free energy in thermodynamics. Using finite element program implemented with the developed algorithm, strain localization behaviors for concrete specimens under compression are simulated.

• Biomolecules & Therapeutics
• /
• v.28 no.3
• /
• pp.230-239
• /
• 2020

Previous studies have shown disrupted synaptic plasticity and neural activity in depression. Such alteration is strongly associated with disrupted synaptic structures. Chronic stress has been known to induce changes in dendritic structure in the basolateral amygdala (BLA) and medial prefrontal cortex (mPFC), but antidepressant effect on structure of these brain areas has been unclear. Here, the effects of imipramine on dendritic spine density and morphology in BLA and mPFC subregions of stressed mice were examined. Chronic restraint stress caused depressive-like behaviors such as enhanced social avoidance and despair level coincident with differential changes in dendritic spine structure. Chronic stress enhanced dendritic spine density in the lateral nucleus of BLA with no significant change in the basal nucleus of BLA, and altered the proportion of stubby or mushroom spines in both subregions. Conversely, in the apical and basal mPFC, chronic stress caused a significant reduction in spine density. The proportion of stubby or mushroom spines in these subregions overall reduced while the proportion of thin spines increased after repeated stress. Interestingly, most of these structural alterations by chronic stress were reversed by imipramine. In addition, structural changes caused by stress and blocking the changes by imipramine were corelated well with altered activation and expression of synaptic plasticity-promoting molecules such as phospho-CREB, phospho-CAMKII, and PSD-95. Collectively, our data suggest that imipramine modulates stress-induced changes in synaptic structure and synaptic plasticity-promoting molecules in a coordinated manner although structural and molecular alterations induced by stress are distinct in the BLA and mPFC.

• The Journal of Korean Physical Therapy
• /
• v.15 no.2
• /
• pp.100-110
• /
• 2003

The purpose of this article is to understand of the muscle adaptation based on myosin heavy chain. Especially, skeletal muscle dadptation in related to aging, unloading, training will discussed. MHC expression is highly plastic in muscles of adult mammals in accordance with the environmental conditions. These changes is called muscle plasticity. The plasticity is the atility of muscle cell to alter either the quantity of protein or the type of protein. MHC is both an important structural and regulatory protein comprising the contractile apparatus.

• Structural Engineering and Mechanics
• /
• v.2 no.1
• /
• pp.35-48
• /
• 1994

A plasticity-based concrete model is proposed. The failure surface is elliptic in the ${\sigma}-{\tau}$ stress space. Independent hardening as well as softening is assumed in tension, compression, and shear. The nonlinear inelastic action initiates from the origin in the ${\sigma}-{\varepsilon}$(${\tau}-{\gamma}$) diagram. Several parameters are incorporated to control hardening/softening regions. The model is incorporated into a nonlinear finite element program along with other classical models. Several examples are solved and the results are compared with experimental data and other failure criteria. "Reasonable results" and stable solutions are obtained for different types of reinforced concrete oriented structures.