• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.480-485
• /
• 2020

Onsager 이론으로 확장된 Maxwell-Wagner 분극 모델을 이용하여 전도성 입자로 제조된 전기유변(Electrorheological, ER) 액체의 전기유변 현상에 대한 전산 모사를 수행하였다. 확장된 Maxwell-Wagner 분극 모델을 이용한 전산 모사는 전도성 입자로 제조된 전기유변 액체의 특성인 비제곱 전기유변 현상(Δτ∝Eⁿ, n≈1.5)을 확인하였다. 전단 흐름에서 전단응력이 정상상태에 도달하는 시점은 전기장 하에서 생성된 사슬 모양 구조가 전단 흐름에 의해 깨짐과 재생성이 정상상태에 도달하는 지점으로 나타났다. 또한, 전단 속도의 증가에 따라 전단응력이 최솟값을 보이는 전도성 입자를 기반으로 한 전기유변 액체의 현상도 관찰하였으며, 이것은 입자의 사슬 모양 구조가 무작위 배열로 바뀌는 순간에 발생하는 것임을 관찰하였다. 입자의 부피 분율 ϕ가 증가에 따라 전단응력은 증가하다가 일정해지는 경향도 관찰하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.407-413
• /
• 2011

VIC (Vortex-In-Cell) method for viscous incompressible flow is presented to simulate the wake behind a modified NACA16 foil. With uniform rectangular grid, the velocity in field is calculated using streamfunction from vorticity field by solving the Poisson equation in which FFT(Fast Fourier Transform) is combined with 2nd order finite difference scheme. Here, LES(Large Eddy Simulation) with Smagorinsky model is applied for turbulence calculation. Effective viscosity is formulated using magnitude of strain tensor(or vorticity). Then the turbulent diffusion as well as viscous diffusion becomes particle strength exchange(PSE) with averaged eddy viscosity. The well-established panel method is combined to obtain the irrotational velocity and to apply the no-penetration boundary condition on the body panel. And wall diffusion is used for no-slip condition numerical results of turbulent stresses are compared with experimental results (Bourgoyne, 2003). Before comparing process, LES(Large Eddy Simulation) SGS(Subgrid scale) stress is transformed Reynolds averaged stress (Winckelmans, 2001).

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.717-722
• /
• 2011

본 연구의 목적은 Al6061 의 T6 열처리 시 발생되는 잔류응력의 변화를 예측하는 것이다. Al6061-T6 의 일반적인 열처리 조건인 용체화처리($530^{\circ}C$, 2hr)와 인공시효($175^{\circ}C$, 9hr)에서 인공시효 시간에 따라 잔류응력 변화를 고려하였다. 잔류응력 예측은 열처리 실험을 수행하여 대류 열전달계수를 확보하고, 탄소성 모델로 가정한 유한요소해석을 적용하였다. 또한 인공시효와 같이 재료가 고온에서 장시간 유지되는 경우의 Zener-Wert-Avrami 함수를 적용하여 잔류응력 변화를 확인하였다. 잔류응력의 측정은 X 선 회절법으로 측정하고 측정결과는 예측된 유한요소해석 결과와 비교하여 해석의 신뢰성을 확보하고 해석기법을 확립하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제26권1호
• /
• pp.281-288
• /
• 2015

In this paper, the maximum likelihood estimators and confidence intervals for parameters of Weibull distribution are derived under three level constant stress accelerated life tests and the assumption that a log quadratic relationship exits between stress and the scale parameter ${\theta}$. The compound linear plan proposed by Kim (2006) is used to allocate the test units at each stress level, which performed nearly as good as the optimum quadratic plan and had the advantage of simplicity. Some simulation studies are given.

• Geomechanics and Engineering
• /
• 제8권4호
• /
• pp.495-510
• /
• 2015

The applications of water jet cutting (WJC) in coal mine have progressed slowly. In this paper, we analyzed the possibility and reasonableness of WJC application to pressure relief in hard coal seam, simulated the distributive characteristics of stress and energy fields suffered by hard coal roadway wallrock and the internal relationships of the fields to the instability due to WJC (including horizontal radial slot and vertical annular slot) on roadway wallrock. The results showed that: (1) WJC can unload hard coal seam effectively by inducing stress release and energy dissipation in coal mass near its slots; its annular slots also can block or weaken stress and energy transfer in coal mass; (2) the two slots may cause "the beam structure" and "the small pillar skeleton", and "the layered energy reservoir structure", respectively, which lead to the increase in stress concentration and energy accumulation in coal element mass near the slots; (3) the reasonable design and optimization of slots' positions and their combination not only can significantly reduce the scope of stress concentration and energy accumulation, but also destroy coal mass structure on a larger scale to force stress to transfer deeper coal mass.

• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.325-343
• /
• 2016

A total stress-based bounding surface model is developed to predict the undrained behaviour of saturated soft clays under cyclic loads based on the anisotropic hardening modulus field and bounding-surface theories. A new hardening rule is developed based on a new interpolation function of the hardening modulus that has simple mathematic expression and fewer model parameters. The evolution of hardening modulus field is described in the deviatoric stress space. It is assumed that the stress reverse points are the mapping centre points and the mapping centre moves with the variation of loading and unloading paths to describe the cyclic stress-strain hysteresis curve. In addition, by introducing a model parameter that reflects the accumulation rate and level of shear strain to the interpolation function, the cyclic shakedown and failure behaviour of soil elements with different combinations of initial and cyclic stresses can be captured. The methods to determine the model parameters using cyclic triaxial compression tests are also studied. Finally, the cyclic triaxial extension and torsional shear tests are performed. By comparing the predictions with the test results, the model can be used to describe undrained cyclic stress-strain responses of elements with different stress states for the tested clays.

• 한국물환경학회지
• /
• 제25권4호
• /
• pp.507-514
• /
• 2009

In this study, a dynamic modeling scheme is presented to describe the probabilistic structure of soil water and plant water stress index under stochastic precipitation conditions. The proposed model has the form of the Fokker-Planck equation, and its applicability as a model for the probabilistic evolution of the soil water and plant water stress index is investigated under a climate change scenario. The simulation results of soil water confirm that the proposed soil water model can properly reproduce the observations and show that the soil water behaves with consistent cycle based on the precipitation pattern. The simulation results of plant water stress index show two different PDF patterns according to the precipitation. The simple impact assessment of climate change to soil water and plant water stress is discussed with Korean Meteorological Administration regional climate model.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.113-117
• /
• 2011

The frame for automotive assembly can be deformed and remained on the residual stress due to high temperature thermal attacks when in welding. The frame deformation can be made to problems when in assembly with body and the residual stress can affect the negative effect on durability performance of the automobile. In order to analyze the frame deformation, the simplified test frame which had the similar shape (form) of the real automotive frame was fabricated. The contactless optical 3D scanner was used for the shape difference measurement of the frame between before and after the welding. The FE-model of the test frame was composed and the heat transfer and thermal stress simulation were performed. The simulated results were compared with the measured results for the reference of the frame design. The deformation shape of the frame by simulation was in good agreement with that by the experimental measurement.

• 한국간호교육학회지
• /
• 제23권1호
• /
• pp.95-107
• /
• 2017

Purpose: The aim of this study was to assess the efficacy of web-based simulation and high-fidelity simulation on acute heart disease patient care. Methods: The project used a comparative study design with two simulation-based training modalities. A total of 144 nursing students participated in this study: 76 students in a web-based simulation, and 68 students in a high-fidelity simulation. Participants rated their self-efficacy, problem-solving ability, interest in learning, level of stress, satisfaction with the simulation experience, and level of difficulty of the simulation. Results: The scores for self-efficacy, problem-solving ability, and interest in learning including interest in clinical training in the high-fidelity simulation group was higher than in the web-based simulation group. However, there were no significant differences in interest in learning, including interest in nursing knowledge, and in lab training, level of stress, satisfaction with the simulation experience, and level of difficulty of the simulation. Conclusion: A high-fidelity simulation of acute heart disease patient care might be beneficial to developing many more abilities for nursing students than would a web-based simulation. Also, since the web-based simulation improved interest in nursing knowledge, it could be a viable alternative to high-fidelity simulation. Further study is needed to verify the effects of varied levels of simulation-based care with more rigorous outcomes.

• Composites Research
• /
• 제28권3호
• /
• pp.89-93
• /
• 2015

본 연구는 무릎 인공관절의 이식 조직으로서 사용되는 이식 부품을 분석한다. 저탄성 티타늄 합금은 응력 차폐 현상을 해소하기 위해 적용되어진다. 이식 부품들의 응력 분포를 연구하기 위하여 시뮬레이션 해석이 수행되어진다. 저탄성 티타늄 합금의 탄성계수에 따른 등가응력 분포를 통하여 골격과의 상관 관계가 도출되고 연구된다. 이식 부품의 응력은 탄성계수가 감소함에 따라 처음에는 감소하다가 약 46 GPa 부근에서 가장 크게 감소하고 다시 증가한다. 이식 부품에 걸리는 응력의 감소는 골격에 더 큰 응력이 가해지게 되므로 응력차폐현상으로 볼 수 있다. 본 연구 결과는 무릎 인공관절의 이식 부품과 같은 복합 재료의 안전한 설계를 개발하는데 필요한 자료로 사료된다.